资源描述
Unit 9 A.1. According to the Nyquist theorem, a signal with a maximum frequency of W Hz (called a band-limited signal) must be sampled at least 2W samples per second to ensure accurate recording.
根据奈奎斯特采样定理,为了确保准确记录信号,最高频率为W Hz的信号(称为带限信号),每秒内必须采集至少2W个样本。
2. This process begins by converting each digital code into an analog voltage that is proportional in size to the number represented by the code.
这个电压值在零阶保持器中保持到下一个码字出现,即需要保持一个采样间隔。
3. Depending on the relationship between the signal frequencies and the sampling rate, spectral inversion may cause the shape of the spectrum in the baseband to be inverted from the true spectrum of the signal.
根据信号频率和采样频率之间的关系的不同,可能出现“频谱反转”现象——基带频谱的形状和信号真实频谱的形状正好相反。
4. Field-Programmable Gate Arrays (FPGA) have the capability of being reconfigurable within a system, which can be a big advantage in applications that need multiple trial versions within development, offering reasonably fast time to market.
现场可编程门阵列具有在系统可重新配置的能力,在开发需要多次试用的应用时,这是一个巨大的优势——它能提供快速的上市时间。
5. However, for applications in which the end product must process answers in real time, or must do so while powered by consumer batteries, GPPs comparatively poor real time performance and high power consumption all but rules them out.
然而,在最终产品必须实时响应的应用中,或者必须在电池供电下实现实时响应的应用中,由于GPP实时性能较差、功耗大,因此就被排除在外了。
6. More and more, these processors are being seen as the dinosaurs of the industry, too enoumbered with PC compatibility and desktop features to adapt to the changing real time market place.
GPP正在越来越多的被视为业界的庞然大物,为了适应不断变化的实时应用市场,不断增加的PC兼容性和台式电脑性能使GPP受到了拖累。
B. 1. While traditional processors follow the Von Neumann architecture model, which assumes a shared single memory to be used for both program instructions and data, DSPs use the Harvard or modified Harvard architecture, which includes multiple program and data memories, along with multiple buses to access them.
传统的处理器遵循冯.诺依曼模型,该模型采用一个单一的共享存储器,同时存储程序指令和数据;而数字信号处理器使用的是哈佛结构或改进的哈佛结构,该结构包含多个程序和数据存储器以及访问这些存储器的多套总线。
2. The specific hardware and software features offered by a particular DSP can make one choice better than another, as can the amount of on-chip memory available. Sometimes DSPs are chosen because well-matched supporting hardware, particularly A/D and D/A converters, is obtainable. Frequently, the quality and convenience of the software tools, for both low level and high level programming languages, are also major factors, as is the availability of third party software.
当片上存储可用时,具有硬件和软件支持的DSP是更好的选择。有时选择一个DSP是因为其匹配性良好的硬件支持,尤其是在模数和数模转换可实现的情况下。通常软件工具对于低级和高级编程语言的质量和便利性都是主要因素,第三方软件的可用性也是其一。
3. While some of these boards are intended to be used as stand alone computers, most are configured to be plugged into a host, such as a personal computer.
但有些电路板是作为独立电脑使用的,但大多数电脑是连接到主机上的,比如个人电脑。
Unit 17A.1. A digital image is made up of many rows and columns of pixels. For gray scale images, each pixel is assigned a number that represents the gray shade assigned to that pixel.
一幅数字图像是由多行和多列像素组成的。对灰度图像而言,每个像素被赋予一个代表该像素灰度级的数。
2. When an image uses only a small portion of the available gray scale levels, histogram equalization can be used to spread out the usage of gray scale levels over the entire available range.
当一幅图像只使用了可用灰度级的一小部分时,可以使用直方图均衡的方法将灰度级的使用扩展到整个可用的范围。
3. The locations and colors of pixels not explicitly marked as control elements are determined by the locations and colors of the control elements that are nearest.
那些没有明确标为控制元素的像素的位置,颜色由离其最近的控制元素的位置和颜色来确定。
4. One simple compression scheme is run-length encoding, which codes more than three repetitions of a number as three copies of the number followed by a count of the additional copies needed.
行程编码是一种简单的压缩方式,这种编码方法将一个数字超过三次的重复次数附加在这个数字后面。
B.1. Compression rates may be generated by determining the size of the compressed image in terms of number of bits per image pixel for the original image.
压缩比可以通过原始图像每像素所需压缩的比特数来确定。
2.In fact, for some Land-sat scenes with urban areas and many small farms, the factor of 2 bits per pixel may not be able to achieve. The same technique applied to a Land-sat image of the mid-west where large fields occur and few shadows exist in images might produce a much better compression.
实际上,对于一些郊区和有许多小农场的陆地场景,2比特每像素的系数可能无法达到。对于辽阔的中西部,图像中阴影极少,相同的技术在其陆地图像中生成的压缩会好得多。
3. In image processing, a procedure called principal components has been designed to identify correlation between image bands and to create a new set of transformed bands that represent a new color space in which the new image bands are uncorrelated.
在图像处理过程中,一个称为主分量的过程被设计用以确认图像频谱之间的相关性,并产生一组新的变换频谱,其中新图像频谱互不相关地表示一个新的彩色空间。
5.The VQ technique is an example of asymmetric compression in that considerably more time is spent deriving the codebook than in decompressing via a codebook lookup. Since different images may have different characteristics, a robust codebook is necessary to successfully code and decode Land-sat and other satellite images. A VQ technique using between channel correlation as well as spatial correlation achieves higher compression rates with lossless than independent band VQ.
矢量量化编码技术是不对称压缩的例子,其中更多时间花在推到码本而不是通过查找码本解压上。因为不同的图像可能有不同特点,要成功滴编码和解码陆地和其他卫星图像,稳定的码本必不可少。利用信道相关和空间相关的矢量技术能获得比独立的矢量技术更高的压缩率,更低的损失。
6. The last type of compression considered is fractal compression. Based on Mandelbrot sets which take advantage of a self similar, scaling independent, statistical feature of nature, fractal compression and decompression involves a clustering approach to finding regions which exhibit the same characteristics as a sample region without regard to rotation and scale.
最后一种可考虑的是分型压缩。它基于曼德布罗特集,利用自相关,独立规模,自然的统计特性。分型压缩和解压缩涉及一种聚类方法,这种方法是查找展现相同特点的区域作为样本区而不考虑旋转和规模。
Unit 19 A.1. Within a communication system the information transfer is frequently achieved by superimposing or modulating the information on to an electromagnetic wave which acts as a carrier for the information signal.
在通信系统中,信息传输是通过把信息叠加在电磁波上或对电磁波进行调制来实现的,电磁波起着载送信号的作用。
2. Although often simpler to implement , analog modulation with an optical fiber communication system is less efficient, requiring a far higher signal to noise ratio at the receiver than digital modulation.
虽然光纤系统的模拟调制易于实现,但其效率较低,且要求在接收端有比数字调制高得多的信噪比。
3. The avalanche photodiode (APD) detector is followed by a front-end amplifier and equalizer or filter to provide gain as well linear signal processing and noise bandwidth reduction.
前置放大器与均衡放大器或滤波器在雪崩二极管检测器的后面以获得增益、线信号处理及噪声宽带的抑制。
B.1. At present, the bandwidth available to fiber systems is not fully utilized but modulation at several gigahertz over a hundred kilometers and hundreds of megahertz over three hundred kilometers without intervening electronics (repeaters) is possible.
目前,传输100km的几吉赫兹的调制信号和传输300km的几百兆赫兹的调制信号都是可能的,因此,光纤系统的可用带宽并没有得到充分利用。
Unit 22 A.1. The EDA tools allow two tasks to be performed : synthesis , in other words the translation of a specification into an actual implementation of the design ;and simulation, in which the specification or the detailed implementation can be exercised in order to verify correct operation.
EDA工具可以完成两类任务:综合和模拟。综合是将设计指标转化为实际的设计实现;而模拟是对设计指标或详细的实现方案进行“演习”,以确保其运行正确。
B.1. FPGA process technology usually lagged the industry by at least one process generation, and the incredible power of re-programmability was paced by high production prices, slow internal performance, and tools that required 10 to 20 hours to compile 50,000 gates.
通常情况下,FPGA的生产工艺技术至少要滞后业界现有水平一代,但强大的重复编程能力受制于高昂的产品价格、较差的内部性能和需要10 ~20个小时编译50 000个逻辑门的工具。
What’s fueling the popularity of FPGA technology to the point that it’s now replacing both gate array and standard-cell ASICs in many applications?
是什么将FPGA技术的普遍推动到了此等程度,以致现在FPGA在许多应用上逐渐取代了门阵列和标准单元专用集成电路?
展开阅读全文