4.5零件提交保证书(中英).doc

零件提交保证书Part submission warrant客户 Customer 采埃孚ZF品名part name 采埃孚转向机盖CYLINDER COVER品号part Number8098_001_583_DES001安全和/或政府法规 是 否safety and/or Yes NOGovernment Regulation工程图样更改水平Engineering DrawingChange level日期Date附加工程更改Additional Engineering change日期Date图样号Shown on drawing No.采购订单号Purchase order No.重量Weight20.8600Kg检查用辅助工具号Checking aid No.工程更改水平Engineer change level日期DateHD资料HD information全称 Name山东浩信浩德精密机械有限公司代码Code地址 address山东昌邑市围子镇浩信工业园邮政编码Postal code261307适用范围 Application客户资料Customer information客户名称/部门 Customer name /DEPT.采埃孚买方姓名/代码 Buyer code提交资料 submission information尺寸 Dimension 材料/功能 Materials/Function 外观Appearance提交原因： Reason for submission 首次提交 Initial submission 更改可选用的结构或材料Change to Optional Construction or Material工程设计更改 Engineering Change(s) 分供方或材料来源更改 Sub-supplier or Material Source Change工装：转换、代替、整修或附加Tooling:Transfer,Replacement,Refurbishment or additional零件加工过程更改 Change in part Processing 偏差校正 Correction of Discrepancy在其它地方生产零件 Parts Produced at Additional Location 其它请说明 otherplease specify要求提交的等级：（选择一项）Requested submission level(check one)等级1保证书、外观件批准报告（只适用于指定外观项目的零件）Level 1-Warrant,Appearance Approval Report(for designated appearance items only)等级2保证书、零件、图样、检查结果、试验室和性能试验结果、外观件批准报告Level 2-arrant,Part,Drawings,Inspection Results,Laboratory and Function Results,Appearance report等级3在顾客处保证书、零件、图样、检查结果、试验室和性能试验结果、外观件批准报告、过程能力结果、能力研究、过程控制计划、量具研究、FMEAlevel3-At customer location Warrant,Parts,Drawings,Inspection Results,laboratory and Function Resultss,Appearance,Approval Report,Process Capability Results,Capability study,Process control plan,Gage study,FMEA等级4同前面等级3内容，但不包括零件Level4 - Per level3,but without parts 等级5在供方处保证书、零件、图样、检查结果、试验室和功能结果、外观件批准报告、过程能力结果、能力研究、过程控制计划、量具研究、FMEALevel5At suppier location- Warrant,Parts,Drawings,Inspection Results,laboratory and Function Resultss,Appearance,Approval Report,Process Capability Results,Capability study,Process control plan,Gage study,FMEA提交结果：Submission results尺寸测量 dimensional measurements 材料和性能试验material and functional tests外观标准 appearance criteria 统计过程数据 statistical process package这些结果满足所有图样和规范要求：是 否（如果选择“否”应解释）These results meet all drawing and specification requirements;yes No(if“NO”-Explanation required)声明：Declaration 我声明，本保证书使用的样品是我们的代表性零件；已符合客户图样和规范的要求；是在正常生产工装上使用规定的材料制造而成，没有不同于正常加工过程的其它操作。与本声明有差异的地方我已在下面作了说明。解释/说明：I affirm that the samples represented by this warrant are representative of our parts and have been made to the applicable customer drawing and specification and made from specified materials on regular production tooling with no operations other than the regular production process. I have note any deviations form this declaration below:印刷体姓名Print Name： 职务Title： 电话号码Phone No.： 授权的供方代表签字Supplier Authorized Signature： 日 期Date： 仅供客户使用 FOR CUSTOMER ONLY批准Approved 拒绝Rejected 其它Other 零件交接情况Part Disposition客户姓名 Customer Name客户签字Customer Signature日期Date143-1