ISO 90002000(英文版).docx

AMERICAN NATIONAL STANDARD

Quality management systems—
Requirements

Approved as a American National Standard by:
American Society for Quality

An American National Standard Approved on December 13, 2000

American National Standards: An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he or she has approved the standard or not, from manufacturing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review and users are cautioned to obtain the latest edition.

Caution Notice:This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American
National Standards may receive current information on all standards by calling or writing the American National Standards Institute.

ANSI/ISO/ASQ 09001-2000

Contents Page
1 Scope 1
1.1 General 1
1.2 Application 1
2 Normative reference 1
3 Terms and definitions 1
4 Quality management system 2
4.1 General requirements 2
4.2 Documentation requirements 2
5 Management responsibility 3
5.1 Management commitment 3
5.2 Customer focus 4
5.3 Quality policy 4
5.4 Planning 4
5.5 Responsibility, authority and communication 4
5.6 Management review 5
6 Resource management 5
6.1 Provision of resources 5
6.2 Human resources 6
6.3 Infrastructure 6
6.4 Work environment 6
7 Product realization 6
7.1 Planning of product realization 6
7.2 Customer-related processes 7
7.3 Design and development 8
7.4 Purchasing 9
7.5 Production and service provision 10
7.6 Control of monitoring and measuring devices 11
8 Measurement, analysis and improvement 11
8.1 General 11
8.2 Monitoring and measurement 11
8.3 Control of nonconforming product 12
8.4 Analysis of data 13
8.5 Improvement 13

Annexes
A Correspondence between ISO 9001:2000 and ISO 14001:1996 15
B Correspondence between ISO 9001:2000 and ISO 9001:1994 19
Bibliography 23

Introduction

0.1 General

The adoption of a quality management system should be a strategic decision of an organization. The design and implementation of an organization’s quality management system is influenced by varying needs, particular objectives, the products provided, the processes employed and the size and structure of the organization. It is not the intent of this International Standard to imply uniformity in the structure of quality management systems or uniformity of documentation.

The quality management system requirements specified in this International Standard are complementary to requirements for products. Information marked “NOTE” is for guidance in understanding or clarifying the associated requirement.

This International Standard can be used by internal and external parties, Including certification bodies, to assess the organization’s ability to meet customer, regulatory and the organization’s own requirements.

The quality management principles stated in ISO 9000 and ISO 9004 have been taken into consideration during the development of this International Standard.

0.2 Process approach

This International Standard promotes the adoption of a process approach when developing, implementing and improving the effectiveness of a quality management system, to enhance customer satisfaction by meeting customer requirements.

For an organization to function effectively, it has to identify and manage numerous linked activities. An activity using resources, and managed in order to enable the transformation of inputs Into outputs, can be considered as a process. Often the output from one process directly forms the input to the next.

The application of a system of processes within an organization, together with the identification and interactions of these processes, and their management, can be referred to as the “process approach”.

An advantage of the process approach is the ongoing control that it provides over the linkage between the individual processes within the system of processes, as well as over their combination and interaction.

When used within a quality management system, such an approach emphasizes the importance of

a) understanding and meeting requirements,

b) the need to consider processes in terms of added value,

C) obtaining results of process performance and effectiveness, and

d) continual improvement of processes based on objective measurement.

The model of a process-based quality management system shown in Figure 1 illustrates the process linkages presented in clauses 4 to 8. This illustration shows that customers play a significant role in defining requirements as inputs. Monitoring of customer satisfaction requires the evaluation of information relating to customer perception as to whether the organization has met the customer requirements. The model shown in Figure 1 covers all the requirements of this International Standard, but does not show processes at a detailed level.

ANSI/ISO/ASQ Q9001-2000

NOTE In addition, the methodology known as “Plan-Do-Check-Act” (PDCA) can be applied to all processes. PDCA can be briefly described as follows.

Plan: establish the objectives and processes necessary to deliver results in accordance with customer requirements and the organization’s policies.
Do: implement the processes.

Check: monitor and measure processes and product against policies, objectives and requirements for the product and report the results.

Act: take actions to continually improve process performance.

Key

Value-adding activities
Information flow

Figure 1 -- Model of a process-based quality management system

0.3 Relationship with ISO 9004

The present editions of ISO 9001 and ISO 9004 have been developed as a consistent pair of quality management system standards which have been designed to complement each other, but can also be used independently. Although the two International Standards have different scopes, they have similar structures in order to assist their application as a consistent pair.

ISO 9001 specifies requirements for a quality management system that can be used for internal application by organizations, or for certification, or for contractual purposes. It focuses on the effectiveness of the quality management system in meeting customer requirements.

ISO 9004 gives guidance on a wider range of objectives of a quality management system than does ISO 9001, particularly for the continual improvement of an organization’s overall performance and efficiency, as well as its effectiveness. ISO 9004 is recommended as a guide for organizations whose top management wishes to move beyond the requirements of ISO 9001, in pursuit of continual improvement of performance. However, it is not intended for certification or for contractual purposes.

0.4 Compatibility with other management systems

This International Standard has been aligned with ISO 14001 :1996 in order to enhance the compatibility of the two standards for the benefit of the user community.

This International Standard does not include requirements specific to other management systems, such as those particular to environmental management, occupational health and safety management, financial management or risk management. However, this International Standard enables an organization to align or integrate its own quality management system with related management system requirements. It is possible for an organization to adapt its existing management system(s) in order to establish a quality management system that complies with the requirements of this International Standard.

INTERNATIONAL STANDARD

Quality management systems — Requirements

I Scope

1.1 General

This International Standard specifies requirements for a quality management system wnere an organization

a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and

b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.

NOTE In this International Standard, the term product” applies only to the product intended for, or required by, a customer.

1.2 Application

All requirements of this International Standard are generic and are intended to be applicable to all organizations, regardless of type, size and product provided.

Where any requirement(s) of this International Standard cannot be applied due to the nature of an organization and its product, this can be considered for exclusion.

Where exclusions are made, claims of conformity to this International Standard are not acceptable unless these exclusions are limited to requirements within clause 7, and such exclusions do not affect the organization’s ability, or responsibility, to provide product that meets customer and applicable regulatory requirements.

2 Normative reference

The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.

ISO 9000:2000, Quallty management systems — Fundamentals and vocabulary.

3 Terms and definitions

For the purposes of this International Standard, the terms and definitions given in ISO 9000 apply.

The following terms, used in this edition of ISO 9001 to describe the supply chain, have been changed to reflect the vocabulary currently used:

supplier ~organization customer

The term “organization’ replaces the term “supplier” used in ISO 9001:1994, and refers to the unit to which this International Standard applies. Also, the term “supplier” now replaces the term “subcontractor”.

Throughout the text of this International Standard, wherever the term “product” occurs, it can also mean “service”.

4 Quality management system

4.1 General requirements

The organization shall establish, document, implement and maintain a quality management system and continually improve its effectiveness in accordance with the requirements of this International Standard.

The organization shall

a) identify the processes needed for the quality management system and their application throughout the organization (see 1.2),

b) determine the sequence and interaction of these processes,

c) determine criteria and methods needed to ensure that both the operation and control of these processes are effective,

d) ensure the availability of resources and information necessary to support the operation and monitoring of these processes,

e) monitor, measure and analyze these processes, and

f) implement actions necessary to achieve planned results and continual improvement of these processes.

These processes shall be managed by the organization in accordance with the requirements of this International Standard.

Where an organization chooses to outsource any process that affects product conformity with requirements, the organization shall ensure control over such processes. Control of such outsourced processes shall be identified within the quality management system.

NOTE Processes needed for the quality management system referred to above should include processes for management activities, provision of resources, product realization and measurement.

4.2 Documentation requirements

4.2.1 General

The quality management system documentation shall include

a) documented statements of a quality policy and quality objectives,

b) a quality manual,

c) documented procedures required by this International Standard,

d documents needed by the organization to ensure the effective planning, operation and control of its processes, and

e) records required by this International Standard (see 4.2.4).

NOTE I Where the term “documented procedure” appears within this International Standard, this means that the procedure is established, documented, implemented and maintained.

NOTE 2 The extent of the quality management system documentation can differ from one organization to another due to

a) the size of organization and type of activities,

b) the complexity of processes and their interactions, and

c) the competence of personnel.

NOTE 3 The documentation can be in any form or type of medium.

4.2.2 Quality manual

The organization shall establish and maintain a quality manual that includes

a) the scope of the quality management system, including details of and justification for any exclusions (see 1.2),

b) the documented procedures established for the quality management system, or reference to them, and

c) a description of the interaction between the processes of the quality management system.

4.2.3 Control of documents

Documents required by the quality management system shall be controlled. Records are a special type of document
and shall be controlled according to the requirements given in 4.2.4.

A documented procedure shall be established to define the controls needed

a) to approve documents for adequacy pri