常用维修手册及维修文件介绍-.pptx

STAGManual and Drawing UsageInstructor:Zou Liming Zu Biao 2024/5/21 周二1STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGGeneral Classification for ManualsGeneral Classification for ManualsCustomized ManualNon-Customized ManualAMMAIPCWDM(AWM,AWL)SSM(ASM)FIM(TSM)SRMSWPM(ESPM)SOPM(PMS)MPDNTMITEM(TEM)CML(Airbus)2024/5/21 周二2STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGAMM维护手册IPC图解零件目录WDM飞机线路图手册SRM结构修理手册MPD维护计划数据ITEM工具设备图解手册SSM系统原理图手册CPM防腐手册NTM无损探伤手册SWPM标准线路施工手册OHM/CMM大修手册/部件修理手册BITE MANUALBITE手册2024/5/21 周二3STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System PART 1 Boeing Manual System MyBoeingFleet:2024/5/21 周二4STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System PART 1 Boeing Manual System Delta Web page:https:/ 周二5STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM 2024/5/21 周二6STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM Page BlockPage TypePage BlockDESCRIPTION AND OPERATION(D/O)1 99FAULT ISOLATION (FI)101-199MAINTENANCE PRACTICES(MP)201-299SERVICING301-399REMOVAL/INSTALLATION 401-499ADJUSTMENT/TEST501-599INSPECTION/CHECK601-699CLEANING/PAINTING701-799APPROVED REPAIRS801-8992024/5/21 周二7STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM AMTOSS(Aircraft Maintenance Task-Oriented Support System)/AMTOSS NumbersTASK 29-11-05-400-801-0022024/5/21 周二8STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM ATA 100 ChapterAircraft General Group/飞机概述05 TIME LIMITS/MAINTENANCE CHECKS 时限/维护检查06 DIMENSIONS AND AREAS 尺寸和区域07 LIFTING&SHORING 顶起与支撑08 LEVELING&WEIGHING 校水平和称重09 TOWING&TAXIING 牵引和滑行10 PARKING,MOORING,STORAGE&RETURN TO SERVICE 停放和系留11 PLACARDS AND MARKINGS 标牌和标记12SERVICING 勤务Airframe Systems Group/飞机机体系统20 STANDARD PRACTICES-AIRFRAME 标准实施-机身21 AIR CONDITIONING 空调22 AUTO FLIGHT 自动飞行23 COMMUNICATIONS 通讯2024/5/21 周二9STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM 24 ELECTRICAL POWER 电源25 EQUIPMENT/FURNISHINGS 设备/装饰26 FIRE PROTECTION 防火27 FLIGHT CONTROLS 飞行操纵28 FUEL 燃油29 HYDRAULIC POWER 液压30 ICE AND RAIN PROTECTION 防冰和防雨31 INDICATING/RECORDING SYSTEMS 指示/记录系统32 LANDING GEAR 起落架33 LIGHTS 灯34 NAVIGATION 导航35 OXYGEN 氧气36 PNEUMATIC 气动系统38 WATER/WASTE 水/污水46 INFORMATION SYSTEMS 信息系统49 AIRBORNE AUXILIARY POWER 空运的辅助电源2024/5/21 周二10STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM Structure Group/结构51 STANDARD PRACTICES AND STRUCTURES-GENERAL 标准施工与结构简介52 DOORS 舱门53 FUSELAGE 机身54 NACELLES/PYLONS 短舱/吊架55 STABILIZERS 安定面56 WINDOWS 窗57 WINGS 机翼2024/5/21 周二11STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM Power Plant Group/动力装置70 STANDARD PRACTICES-ENGINES 标准实施-发动机71 POWER PLANT 动力装置72 ENGINE 发动机73 ENGINE FUEL AND CONTROL 发动机燃油和控制74 IGNITION 点火75 AIR 空气76 ENGINE CONTROLS 发动机控制器77 ENGINE INDICATING 发动机指示78 EXHAUST 排气79 OIL 滑油80 STARTING 起动2024/5/21 周二12STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM Power Plant Group/动力装置70 STANDARD PRACTICES-ENGINES 标准实施-发动机71 POWER PLANT 动力装置72 ENGINE 发动机73 ENGINE FUEL AND CONTROL 发动机燃油和控制74 IGNITION 点火75 AIR 空气76 ENGINE CONTROLS 发动机控制器77 ENGINE INDICATING 发动机指示78 EXHAUST 排气79 OIL 滑油80 STARTING 起动2024/5/21 周二13STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM Function Code000Removal100Cleaning200Inspection/Check300Correction/Repair400Installation500Material&Aircraft Handling600Servicing/Preserving/Lubrication700Testing/Checking800Miscellaneous900Change=Remove+Installation2024/5/21 周二14STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM The sequence number is used to provide a unique number when the first four elements are not unique.(a)The sequence number starts at 801 for tasks and continues through 999.If there are more than 200 tasks,the number continues with A01 through A99,B01 through B99,etc.(b)The sequence number starts at 001 for subtasks and continues through 799.The configuration number is used to indicate an engine or page block configuration.(a)The first position is the engine prefix.(b)The second and third positions are the page block configuration.(c)If the page block is not part of the engine chapters or does not have a CONFIG number(see effectively and configuration numbering),then the tasks and subtasks will not have this element.(d)If the page block is not part of the engine chapters but does have a configuration number,then the first position will have a zero and the last two will indicate the CONFIG number.2024/5/21 周二15STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/AMM PART 1 Boeing Manual System/AMM 2024/5/21 周二16STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 2024/5/21 周二17STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 如果已知件号，则由数码索引入手：在数码索引中找到此件号，并记下对应的章、节、组件、图和项目号。由图号可找到相应的图解。在图解中找到部件及项目号，并在清单中可找到相应的部件及相关的内容。如果未知件号，则由目录内容表入手：在预想到的章节中找到内容目录表。参见零件所在的主组。图是按主要名称的字母顺序列出的，找到零件最有可能被显示的图解标题，记下图号。由图解和清单可找到相应的内容。查找查找IPCIPC的方法的方法2024/5/21 周二18STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 2024/5/21 周二19STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 2024/5/21 周二20STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 2024/5/21 周二21STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 1.FIGURE NUMBER-The figure number identifies the illustration and the part list defining a specific portion of the aircraft coverage.The figure number appears in the illustration title,to the left of the first item number in the FIGURE ITEM column at the top of each parts list page,and in the footing of each applicable page.2.ITEM NUMBER-The item number corresponds to the number on the part in the illustrations.A dash(-)preceding the item number indicates that the part is not illustrated.As noted in the Explanation of Customizing description,item numbers missing from parts list section but found on the illustration are not applicable.3.NEXT HIGHER ASSEMBLY(NHA)CROSS REFERENCE-The reference catalog location indicates where theused on component or assembly is defined.4.UNITS PER ASSEMBLY(UPA)-The quantity of the part which is used on the NHA assembly.The following entries other than a numeric value maybe found in the IPC data:RF(Reference)-Indicates the item is listed at the NHA location which carries the UPA quantity.The NHA location is found through the NHA cross reference(See 3.).AR(As Required)-Indicates the part is used in a quantity determined at the time when the part is installed.2024/5/21 周二22STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 5.SUPPLIER CODE-The(5)digit code which identifies the manufacturer of the part.The Supplier Code is found in the nomenclature column following the supplier part number entry.The Supplier Code is extracted from the Cataloging Handbook H4/H8,Commercial and Government Entity(CAGE),the NATO Supply Code for Manufacturers(NSCM),or it is assigned by Boeing if not available from the CAGE or NSCM handbooks.The supplier name and address corresponding to each Supplier Code is available in the Suppliers Name and Address Index.6.SPECIFICATION NUMBER and QUALIFIED PARTS-The Specification Number is a Boeing assigned number which defines all of the necessary part performance requirements a supplier must comply with to be qualified to produce the part.The Boeing Specification number is documented in the Part Number column when no supplier part has been qualified.When a supplier part qualifies to a Boeing Specification,the supplier part number is shown in the Part Number column and the specification is placed in the Nomenclature column.Any additional qualified supplier parts are captured as optional parts in the nomenclature column.7.USED ON-A note in the Nomenclature column which indicates the appropriate next higher assembly when the part is not common to all of the next higher assemblies listed preceding the part.2024/5/21 周二23STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 8.FOR DETAILS SEE-A reference to another location where the installation or assembly is broken down in further detail to its component parts.9.POSITION DATA-Extra information defining where the part is installed.Typical information presented here includes station or zone location information or physical installed position information.10.ALTERED FROM-An existing component that was altered to create another part number.There are only minor modification differences between the original(Altered from)part number and the new part number.11.EFFECT TO FROM-Where a design change produces a qualified or limited interchangeability condition,the delivered effectivity is shown and an appropriate note is included in the nomenclature column to define this condition.The relationship between parts shown in interchangeability notes is defined by the following terms:REPLACES OR REPL BY-Indicates the parts(or sets)are physically and functionally interchangeable.MAY USE-Indicates a one-way interchangeability exists,either forward or backward,depending on the parts involved.T/W(together with)-Indicates parts which are necessary to be replaced along with the main part for interchangeability.Interchangeability is only accomplished as specified by the note.2024/5/21 周二24STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 12.ILLUSTRATION REFERENCE-A reference note to the functionally related figure which defines the part(s).The part is drawn at this figure in phantom for identification of an Illustration Reference condition.Tubing and ducts are example uses for This reference.13.OVERLENGTH PART NUMBER-A Boeing Company Reference(BCREF)number is assigned to all overlength part numbers which exceed 15 digits.The BCREF number is placed in the Part column and the overlength number is in the nomenclature column.PN UNASSIGNED-BCREF numbers are also assigned when there is no part number for a component.Thiscondition occurs for supplier or customer modification data.14.MAINTENANCE COMPONENTS OF ASSEMBLIES-Disassembly sequence of intermediate subassemblies may not be included in the IPC if the intermediate subassemblies are not considered line maintenance components.TEMPORARY BREAKDOWN-A note which is included in the IPC when a design change produces an assembly part number for which breakdown information is not available.Breakdown components for the current assembly are extended as a applicable for the new assembly.The temporary breakdown note is removed when actual breakdown information is available and incorporated in the IPC.2024/5/21 周二25STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 15.ATTACHING PARTS-Attaching parts are listed immediately following the item which they attach.They are preceded by the phrase Attaching Parts and are followed by the symbol-*-.16.BOEING STANDARD PARTS-Boeing Standard Parts are identified by a BAC prefix.The Boeing Standard Part Number appears in the part number column when no supplier part has yet been qualified.When an equivalent supplier part number is qualified,it will appear in the part number column and the Boeing Standard Part Number and any other equivalent supplier numbers will appear in the nomenclature column as optional parts If no supplier part numbers are included in the Parts List for a Boeing Standard,see the Boeing Standards Volumes(D-590),Boeing to Supplier Part Number Cross-Reference Index or the specific standards page for procurement source information.17.CHANGE INDICATORS-Change indicators are applied opposite the revised data line entry.An R in the margin indicates the line opposite was added or revised in the current revision.When the Parts List page for a figure includes Airline Stock Numbers,the letter S is shown opposite the line entry When a change in the Airline Stock Number data is the only Change to the item entry.2024/5/21 周二26STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 18.FUNCTIONALIZED COVERAGE-Certain items contain components which are illustrated and listed in various chapters according to their ATA Specification 100 function.The presence of this condition is indicated by showing the figure location(s)for the functionalized coverage in the NOMENCLATURE column of the major installation or assembly line entry.In the example,the portion of the Door Instal-lation covering LIGHTS is displayed in the figure identified in Chapter 33.The portion covering NACELLES/PYLONS is shown in the figure identified in Chapter 54.19.BOEING PROPRIETARY COLOR CODED PARTS-Boeing Proprietary Color Coded Parts,excluding Boeing specification part numbers 10-XXXXX,SXXXNXXX,SXXXTXXX,SXXXUXXX,SXXXWXXX or 60BXXXXX,are identified with an alpha SP suffix.This entry represents consolidation of all color codes applicable for the given usage.Color coded parts may be ordered with either the specific airline(alpha)color code suffix or the consolidated SP suffix.Orders received for SP parts will be converted and processed under the airlines(alpha)color coded part number.A reference to the appropriate aircraft registry number or the color name on orders for SP parts will facilitate the color conversion.Note:Color code does not affect physical or functional interchangeability aspects.20.LOCAL FABRICATION PARTS-Material requirements for parts which can be locally fabricated are included in the Nomen-clature column within a(MFD FROM-)note.2024/5/21 周二27STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGPART 1 Boeing Manual System/IPC PART 1 Boeing Manual System/IPC 21.FIGURE TITLE-Where more than one lead entry or subject is included in a figure,a figure title is used to facilitate the preparation and maintenance of the Chapter Table of Contents entries.The Effectivity column for the figure title identifies the aircraft covered in the figure.22.COMPONENT MAINTENANCE MANUAL REFERENCE-The applicable Component Maintenance Manual providing detail coverage of an assembly is identified in a(REF CM