©2010-2025 宁波自信网络信息技术有限公司 版权所有
客服电话：4009-655-100 投诉/维权电话：18658249818
浙ICP备2021020529号-1 | 浙B2-20240490
关注我们 ：
1、 This document specifies the general quality requirements for “Sleeping Bag” and other similar products. It is used as a general guideline for inspection if clients have not defined their requirement. 此文件为针对箱包及类似产品验货的通用标准。如果客户没有特别的要求，在此定为通用的验货指南 1. Inspection Criteria of Product / Package 产品/包装
2、验货标准 Ø Product: 产品 ² Must be without any unsafe defect for using; 不允许有在实际使用中任何对使用者造成伤害的缺陷； ² Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect; 不应有任何损坏，破碎，擦伤，或碎裂等外观缺陷； ² Must be conform to the shipping market legal regulation / client’s requirement
3、 必须符合销往国当地的法规以及客户的要求； ² The construction, appearance, cosmetics and material of all units should comply with client’s requirement / approved samples; 产品的结构，外观，材料等必须符合客户的要求或与样品保持一致； ² All units should have full function complying with client’s requirement / approved samples; 产品功能必须符合
4、客户的要求或与样品保持一致； ² The marking / label on unit should be legal and clear. 产品上的标记/标签必须符合法规要求且清晰明确。 Ø Package: 包装 ² All units will be adequately packaged, and constructed from suitably robust materials, such that it arrives in store in a merchantable condition; 产品要有足够强度的材料构成的充分包装，使得货物
5、以可销售的状态到达目的仓库； ² The packaging material can protect the goods from damage during transportation; 在运输过程中，包装材料能防止货物受损； ² The shipping mark, bar code, label (such as price label), should conform to client’s spec. and/or approved samples; 箱麦，条形码，标签（例如：价格标签）应符合客户的要求或与样品保持一致； ² The package
6、should comply to client’s requirement / approved samples; 包装必须符合客户的要求或与样品保持一致； ² Text of illustration, instruction, label and warning statement etc. must be clearly printed in user’s language; 图解，说明书，标签，警告声明等应清晰地印有使用者语言； ² The illustration and instruction on the packaging must conform to the
7、 product and its actual performance. 包装上的图解和说明书必须与实际产品及其功能保持一致； ² The method and material of pallet/crate etc. should be approved by client. 栈板/板条箱包装的材料及方式必须经客户批准 3. Inspection Plan & Defects classification检验计划及缺陷分类 Ø Sampling procedure & Defects Definition, please refer to SH
8、OP-HI001 General Inspection Operation Procedure 抽样程序以及缺陷定义，详见SHOP-HI001 通用检查程序 – 最终随机检查。 Ø Acceptable Quality Limit: 可接受的质量限 ² Critical 0 Non-conformity is not allowed ² AQL 1.5 For Major Non-Conformity ² AQL 4.0 For Minor Non-Conformity Item code Details详细说明 Sample size & Defects C
9、lassification 抽样数量及缺陷分类 Critical 致命 Major 严重 Minor 轻微 １ Packaging Check 包装检查 At least the square root of the total number of cartons or defined by client, and checks all cartons/pallets/crates that were selected for sampling. 至少是总箱数的平方根，否则就由客户特别指定，要对所有抽取的卡通箱/栈板/板条箱进行检查. Details pl
10、ease refer to SHWI-HI-G-001 具体请参照产品包装验货通用作业指导书相关章节 2 Aesthetics / Appearance Check 外观检查 G-II A Instruction (sheet)/warning/warranty 说明书/警告语/质保书/印刷材料 Details please refer to SHWI-HI-G-001 具体请参照产品包装验货通用作业指导书相关章节 B Appearance of unit产品外观 Material Defects Material torn on
11、 shell 面料破 X Material torn on lining fabric 里料破 X Material holes on shell 面料破洞 X Material holes on lining fabric 里料破洞 X Thin parts on leather 薄皮料 X Scars on leather 皮料有疤痕 X X Grain spots on leather 皮料有粗纹 X Scratches on leather 刮花 X X
12、 Woven fabric defects - (Broken yarn) 布疵 (断纱) X X Woven fabric defects - (Missed yarn) 布疵 (缺纱) X Woven fabric defects - (Filling bars) 布疵 (横档) X Woven fabric defects - (Coarse yarn) 布疵 (粗纱) X Woven fabric defects - (Slubs) 布疵 (大肚纱) X X Cleanliness Dir
13、t 脏 X X Stain 污渍 X X Oil spots 油点 X X Oil stain 油渍 X X Water spots 水点 X X Water stain 水渍 X Rust stain 锈渍 X X Pen mark 钢(原子)笔痕 X Pencil mark 铅笔痕 X Chalk mark 粉笔痕 X X Glue stain 胶水渍 X X Glue mark 胶水痕 X X
14、 Untrimmed thread ends 线头未剪清 X X Loose thread 松缝线 X Dust attached on fabric surface 脏污纤维附在织物表面 X Loose fibers attached on fabric surface 松散纤维附在织物表面 X Finger prints on mirror surface 镜面指印 X Dust attached on mirror surface 镜面锈迹 (脏污纤维附在织物表面) X X Loose
15、 fibers attached on mirror surface 镜面飞花 (松散纤维附在织物表面) X Appearance Color shade variation between two parts 色差 X X Color off tone 脱色 X Creases mark 皱痕 X Wrinkle mark 起皱 X Fold mark 折痕 X X Unmatched checks 不对格 X X Unmatched strips 不对条 X
16、 X Visible position hole 定位孔 X X Visible position mark 定位记号 X Stitching Defects Broken stitches 断线 X Skipped stitches 跳线 X X Run-off stitches 线落坑 X X Uneven stitching 线迹不匀 X X Irregular stitching 线迹不规则 X X Wavy stitching 线迹起波浪 X X
17、 Insecured back stitching 回针不良 X Loose stitch tension 线迹张力松 X X Uneven stitch tension 线迹张力不匀 X X Uneven stitch density 线迹密度不匀 X X Missed stitching 漏车缝 X Missed bar tack 欠打枣 X Unmatched join stitching 驳线不良 X X Missed sewing operation 漏车缝工
18、序 X Needle chewing 针痕 X X Seaming Defects Open seam 开缝 X Puckered seam 缝起皱 X X Pleated seam 缝打折 X Twisted seam 扭缝 X Puckering 起皱 X X Frayed edges 散口 X Misaligned seam 缝不对称 X Misplaced bar tacks 错打枣位置 X Accesso
19、ries & Trimmings Scratches 挂花 X X Poor plating 电镀不良 X Sharp edges 利边 X Sharp points 利点 X Rust 生锈 X Wrong type 错款 X Color discharged 脱色 X Malfunction of zipper 拉链失灵 X Zipper slider running not smoothly 拉链不顺畅 X X Missed
20、zipper teeth 拉链掉齿 X Missed zipper puller 掉拉链头 X Wavy zipper 拉链起波 X X Poor setting of zipper 拉链安装不良 X Hanging threads obstructed zipper function 挂线阻滞拉链 X Snap missed 欠按钮 X Snap detached 按钮掉 X Rivet missed 欠铆钉 X Rivet detached 铆钉掉
21、 X Studs missed 欠按钮 X Studs detached 按钮掉 X Eyelets missed 欠眼孔 X Eyelets detached 眼孔掉 X Snap misplaced 按钮错位 X X Rivet misplaced 铆钉错位 X X Studs misplaced 按钮错位 X X Eyelets misplaced 眼孔错位 X X Snap badly fitted 按钮不合 X Ri
22、vet badly fitted 铆钉不合 X Studs badly fitted 按钮不合 X Eyelets badly fitted 眼孔不合 X Snap deformed shape 按钮变形 X Rivet deformed shape 铆'钉变形 X Studs deformed shape 按钮变形 X Eyelets deformed shape 眼孔变形 X Press studs difficult to fasten 按扣开合难 X
23、 Missed buckles 欠搭扣 X Missed rings 欠搭环 X Misplaced buckles 搭扣错位 X X Misplaced rings 搭环错位 X X Badly fitted buckles 搭扣不合 X Badly fitted rings 搭环不合 X Missed lock 欠锁 X Missed key 欠钥匙 X Misplaced lock 锁错位 X X Lock malfunctio
24、n 锁失灵 X Poor sewing decorative trimmings 饰物缝合不良 X X Misplaced decorative trimmings 饰物错位 X X Badly fitted decorative trimmings 饰物不合 X Handle & Shoulder Strap Missed handle straps 欠手带 X Missed shoulder straps 欠肩带 X Frayed edges 散口 X Twist
25、ed handle straps 提手带打扭 X Twisted shoulder straps 肩带打扭 X Size & Shape Dimension not conform to size specification 错尺寸 X Size failed for fitting test of dummy 装配不合 X Different shape 错形 X Deformed shape 变形 X Embroidery Missed embroidery 欠绣花
26、 X Misplaced embroidery 绣花错位 X Broken embroidery stitches 断绣线 X Incorrect embroidery stitches density 绣线密度不对 X Uneven embroidery stitching 绣线不均 X X Color off shade or not as specified 绣线脱色 X Wrong embroidery 错绣花 X Broken quilting stitches
27、 绗棉断线 X Missing quilting stitches 欠绗棉 X Printing Defects Missed printing 欠印花 X Misplaced printing 印花错位 X Printing faults - (Printing stain) 印疵 (印污迹) X X Printing faults - (Off printing) 印疵 (印花移位) X Color off shade or not as specified 印花脱色
28、 X Wrong printing 错印花 X Labels & Hangtags Missed label 欠商标 X Missed hangtag 欠挂牌 X Wrong label 错商标 X Wrong hangtag 错挂牌 X Label insecurely stitched 商标车缝不牢 X Label folded by stitching 商标车折 X X Part of label sewn inside seam 商标部份被车
29、入缝 X Label sewn reversed (Label up-side-down) 商标颠倒 X Label sewn reversed (Label back face out) 商标车反 X Packing Defects Wrong folding size 折叠尺寸不对 X Wrong folding method 折叠方法不对 X Wrong hangtag 挂牌错 X Wrong tissue paper 垫纸用错 X Missed hangta
30、g 欠挂牌 X Missed tissue paper 欠垫纸 X Missed silica gel 欠防潮剂 X Polybag torn 胶袋破 X Miscellaneous Defects Wrong size label 错尺码商标 X Odor 异味 X Mildew 发霉 X Wet item 受潮 X Damp item 受湿 X 3 Bar Code verification 条形码检测 S-1
31、 Bar code can not be scanned条形码不能被扫描 X Wrong bar code label is used 错误的条形码 X 4 Field Tests & Data Measurement 现场测试及数据测量 A Metal detection check (if applicable) 金属探针测试 (若适用) G-II Any metal particle found by Metal Detector 通过金属探测仪器发现金属碎屑 X B Assembly test (if applicab
32、le) 组装测试 (若适用) S-3 Can not be assembled or difficult to be assembled 不能组装或组装困难 X C Unit size check 测量尺寸 S-1 The measured data is out of ±5% tolerance 测量出的数据超出±5%公差范围 X D Unit weight check 重量测量 S-1 The measured data is out of ±5% tolerance 测量出的数据超出±5%公差范围 X E Zipper c
33、ycle usage test 拉链循环使用测试 S-1 Pull the zipper head and slide back and forth to its full stop travel for 10 times 全程往返拉动拉链头，重复10次 Any defect or loss serviceability 缺陷产生或功能丧失 X F Trolley cycle usage test (if applicable) 拉杆循环使用测试(若适用) S-1 When locking system is released, the tubes shou
34、ld move up and down under a force between 1.5-2kgf 当拉杆锁死装置释放时，拉杆应能够在1.5到2公斤力的作用下上下滑动 The tubes could move up and down within a force of 1.5kgf or could not move up and down under a force more than 2kgf. 小于1.5公斤力，拉杆可以上下滑动； 或在大于2公斤力的作用下不能上下滑动 X G Handle/Belt strap strength test 手柄/背带强度测试
35、 3 samples Load the sample with 0.5kg/liter or the designed load evenly distributed, lift the sample by its handle/belt strap and hang for 1 hour. 产品按照每升0.5公斤或额定负载进行加载，用手柄/背带吊起1小时 Handle/belt strap damaged; seam broken; product damaged 手柄/背带损坏，缝合处破损，或产品破损 Fail the shipment H Connector cycle
36、 usage test 接头循环使用测试 S-1 Fit the connector to its stop & release, 10 times 接头安装到位然后释放，重复10次 Crack or fracture 接头开裂 X I Simulation Usage Test (if applicable, for trolley case only) 模拟路面测试 (若适用，仅针对拉杆箱) 1 sample Under a load of 0.5kg/liter or labeled claims for 1 hour running as actua
37、l use 产品按照每升0.5公斤或额定负载进行加载，根据实际使用状况运行1小时 Unit malfunction or structure fracture 产品功能失效或结构破损 Fail the shipment J Stuffing material check (if applicable) 填充物检查 (若适用) 1 sample Dissect the unit and visual examine the stuffing material. The material must be clean, free from insect, metal par
38、ticle, wood splinter and other contamination and unpleasant odor 将产品剖开，用眼睛检查填充物，填充物需干净，无虫，金属微粒、木屑以及其他异物，并且无异味 Fail the shipment K Water proof test (if applicable) 防水测试 (若适用) 1 sample Not conformed to the intended design as specified in instructions 与产品说明的防水设计不符 Fail the shipment L Silk s
39、creen printing adhesion test (if applicable) 丝印附着性测试 1 sample The printing peel off with 3M 600 tape 用3M 600胶带，发现丝印剥落 Fail the shipment 5 Transportation drop check 摔箱测试 1 carton Details please refer to SHWI-HI-G-001 具体请参照产品包装验货通用作业指导书相关章节 Note: 备注 The above-described defects ar
40、e those most commonly found, but not necessarily cover all possible defects. 以上缺陷描述是普遍存在的，但是可能未覆盖到所有的缺陷. If the factory absence of some kinds of test equipment for the above mentioned field tests & data measurement items, then the inspector should be reported in our inspection report for the reference to client. 如果工厂缺乏以上测量要求所必需的测试设备，验货员要在报告中注明，以供客户参考.
©2010-2025 宁波自信网络信息技术有限公司 版权所有
客服电话：4009-655-100 投诉/维权电话：18658249818
浙ICP备2021020529号-1 | 浙B2-20240490
关注我们 ：
