法国螺栓标准(NF-bolt-standards).doc

法国螺栓标准(NF bolt standards)
ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC

编号
中文名称
英文名称
NF A47-251-5-2003
钢丝绳接线端.安全.第5部分:U形螺栓拉线器
(Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips.)
NF A49-580-1988
钢管脚手架和支承架用联结件、中心螺栓和踏板.要求和测试程序
(Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.)
NF A87-021-1998
焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN ISO 13918)
(Welding. Studs and ceramic ferrules for arc stud welding.)
NF A89-600-1998
焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555)
(WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).)
NF E04-014-1933
机械、电气和相关工业的技术图，构架的铆钉和螺栓的图上符号表示法（１９８１．９确认）
(TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.)
NF E25-011-1992
紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母
(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF E25-022-1-2001
紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C
(Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.)
NF E25-023-1992
紧固件.螺栓和螺钉的自由尺寸孔
(Fasteners. Clearance hole for bolts and screws.)
NF E25-100-1-1999
碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱
(Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.)
NF E25-100-3-1992
紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
NF E25-100-4-1992
紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
NF E25-100-6-1998
不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓
(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
NF E25-100-7-1995
紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩
(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF E25-112-2001
六角头螺栓.产品等级A和B
(Hexagon head bolts - Product grades A and B.)
NF E25-113-1992
紧固件.六角头螺栓.B级、缩杆制品
(Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).)
NF E25-115-1-2001
六角头螺栓.产品等级C
(Hexagon head bolts - Product grade C.)
NF E25-140-1994
紧固件.电弧焊接双端螺栓.符号SA.尺寸和物理化学特性.拉制电弧焊接螺栓系统
(FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.)
NF E25-152-2001
米制细牙螺纹的六角头螺栓.产品等级A和B
(Hexagon head bolts with metric fine pitch thread - Product grades A and B.)
NF E25-501-2000
紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级
(Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
NF E25-504-1-2003
米制细牙螺纹六角法兰面螺栓.小系列
(Hexagon bolts with flange with metric fine pitch thread - Small series.)
NF E25-504-1998
法兰六角型螺栓.小型系列
(HEXAGON BOLTS WITH FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 1662).)
NF E25-505-1997
带法兰六角头螺栓.重形系列(欧洲标准EN 1665)
(HEXAGON BOLTS WITH FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 1665).)
NF E25-525-2000
通用米制螺栓、螺钉和螺母用平垫圈.一般示意图
(Plain washers for metric bolts, screws and nuts for general purposes - General plan.)
NF E25-800-0-1994
紧固件.波纹钢管用螺栓.第0部分:按要求所制的螺栓
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).)
NF E25-800-1-1994
紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-800-2-1994
紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-800-3-1994
紧固件.波纹钢管用螺栓.第3部分:不带法兰的凸形六角螺母.产品等级C
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
NF E25-800-4-1994
紧固件.波纹钢管用螺栓.第4部分:带法兰的凸形螺母.产品等级C
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
NF E27-000-1972
螺栓、螺母及附件.术语
(Bolts, nuts and accessories.nomenclature.)
NF E27-312-1959
商业性通用螺栓制造.圆柱头粗制或精制螺栓
(CHEESE HEAD NIB BOLTS.)
NF E27-313-1959
商业性通用螺栓制造.圆头粗制或精制螺栓.直径从４到６０mm
(ROUND HEAD NIB BOLTS.)
NF E27-314-1959
商业性通用螺栓制造.埋头或凸圆埋头铁制粗制或精制螺栓.直径４到６０mm
(COUNTERSUNK OR RAISED COUNTERSUNK HEAD NIB BOLTS.)
NF E27-341-1973
商业性通用螺栓制造.“木结构”螺栓
(BOLTS FOR TIMBER.)
NF E27-342-1961
商业性通用螺栓制造.埋头或凸圆埋头木螺栓
(COUNTERSUNK OR RAISED COUNTERSUNK HEAD BOLTS (NIB OR SQUARE NECK) FOR TIMBER.)
NF E27-351-1969
商业性通用螺栓制造.凸圆头方颈螺栓
(ROUND HEAD SQUARE NECK BOLTS (“JAPY“ TYPE).)
NF E27-353-1961
商业性通用螺栓制造.带销埋头犁形螺栓
(COUNTERSUNK HEAD NIB BOLTS (“PLOUGHSHARE“ TYPE).)
NF E27-354-1961
商业性通用螺栓制造.方颈埋头犁形螺栓
(COUNTERSUNK HEAD SQUARE NECK BOLTS (“PLOUGHSHARE“ TYPE).)
NF E27-355-1980
紧固件.底板受力器材.轻微磨损零件固定用的双耳埋头螺栓
(FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.)
NF E27-412-1973
商业性通用螺栓制造.宽的方螺帽.直径４到３０mm
(LARGE SQUARE NUTS.DIAMETERS FROM 4 TO 30 MM.)
NF E27-414-1969
螺栓制造.冠形螺帽
(CASTLE NUTS.)
NF E27-488-1972
商业性通用螺栓制造.小销
(Cotter pin hole dimensions.)
NF E27-682-1965
商业性通用螺栓制造.木结构螺栓装配的垫圈和垫片
(Round or square washers for timber.)
NF E27-701-1984
金属结构施工检验紧固螺栓.技术规范.订货,检验和供货条件
(Structural bolts and nuts intented for use in steel structures. Technical specifications. Order, test and delivery conditions.)
NF E27-702-1984
金属结构施工检验紧固螺栓.螺栓使用性能试验
(Structural bolts and nuts intented for use in steel structures. Test on suitability of bolts for use.)
NF E27-711-1982
金属结构施工检验紧固螺栓.六角头螺栓.尺寸和公差
(Locking bolts and nuts intended for use in metal constructions. Hexagon bolts. Dimensions and tolerances.)
NF E29-041-1994
工业管道.减缩的螺栓柄.规范
(INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.)
NF E29-042-1-2000
法兰及其接头.螺栓连接.第1部分:螺栓连接的选择
(Flanges and their joints - Bolting - Part 1 : selection of bolting.)
NF E29-042-2-2002
法兰及其连接件.螺栓连接.第2部分:钢制法兰用螺栓料的分类.PN标识的
(Flanges and their joints - Bolting - Part 2 : classification of bolt materials for steel flanges, PN designated.)
NF E29-043-1990
工业管道工程.管道、锅炉和压力容器法兰组件用非合金钢或合金钢制螺栓
(Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.)
NF E74-300-1998
螺栓和螺母用装配工具.扳手和套筒扳手的开口.通用公差
(Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.)
NF F00-022-1978
铁路材料梗概.半成品调整螺栓
(RAILWAY MATERIAL IN GENERAL. HALF-FINISHED ADJUSTING BOLTS.)
NF F00-023-1978
通用铁路设备.紧配合用精加工配合螺栓
(RAILWAY MATERIAL IN GENERAL. FINISHED TIGHT-FIT BOLTS.)
NF F00-024-1978
通用铁路设备.动配合用精加工配合螺栓
(RAILWAY MATERIAL IN GENERAL. FINISHED CLEARANCE FIT BOLTS.)
NF F00-025-1971
通用铁路设备.环首螺栓
(GENERAL RAILWAY EQUIPMENT. EYE-BOLTS.)
NF F05-004-1972
铁路固定设备.加强固定用定位楔式螺栓
(FIXED RAILWAY EQUIPMENT. EXPANSION BOLTS WITH SPIKES FOR EXTRA FIRM FIXING.)
NF F37-060-1983
铁路运输设备.液态化工产品运输用罐车和贮液集装箱.带扣钉螺栓闭锁装置的圆顶盖
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.)
NF F42-031-1990
铁路固定设备.电力牵引线用的压接或螺栓压接的装置
(RAILWAY FIXED EQUIPMENT. CRIMPED OR BOLT CRIMPED TERMINAL MATERIAL FOR ELECTRIC TRACTION LINES.)
NF F56-121-1984
铁路固定设备.通讯和信号装置架空线路用器材.镀锌六角头螺栓
(Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized hexagon head bolts.)
NF F56-122-1984
铁路固定设备.通讯和信号装置架空线路用器材.镀锌圆头螺栓
(Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized round head bolts.)
NF F56-208-1980
铁路固定设备.通讯和信号装置架空线路用器材.固定螺栓用环
(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. RINGS FOR BRACING BOLTS.)
NF F76-014-1987
铁路固定设备.３８mm鱼尾板螺栓板手
(Fixed railway equipment. Fork-wrenchs of 38 for fish-bolts.)
NF F76-026-1976
铁路固定设备.粗制插销螺栓.销
(FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. KEY-BOLTS. KEY.)
NF J65-175-1958
造船工业.轴线.联轴节.套筒联轴节用轴端、制动销和装配螺栓
(SHIPBUILDING. SHAFT LINES. COUPLINGS. DETAILS OF SHAFT ENDS,KEYS AND ASSEMBLY BOLTS FOR MUFF COUPLINGS.)
NF L05-224-1990
航空和航天螺栓用ISO 螺纹公差
(Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.)
NF L05-230-2-1990
航空和航天.MJ螺纹.第2部分:螺栓和螺母的尺寸
(AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.)
NF L20-021-1995
航空航天系列.T型头螺栓孔和夹子的设计标准
(AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).)
NF L21-271-2000
紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的凸头锁紧螺栓
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-272-2000
紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-273-2000
紧固件.紧公差T-A６V铝合金杆并有XC１０钢环凸头锁紧螺栓
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L21-274-2000
紧固件.紧公差T-A６V钛合金杆并有XC１０钢环１００°埋头锁紧螺栓
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L22-040-1956
航空螺栓螺母.使用公差.国际单位制螺纹
(AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).)
NF L22-236-1989
航空用螺栓螺母.十二角头螺钉.使用温度在高于235℃
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
NF L22-237-1989
航空用螺栓螺母.带锁紧孔十二角头螺钉.使用温度在高于235℃
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
NF L22-246-1989
航空用螺栓螺母.十二角头螺钉.细螺距.使用温度高于在２３５℃
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF L22-431-2000
航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹.根据直径4H5H或5H的Ⅱ类公差
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF L22-432-2000
航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.左旋ISO螺纹.根据直径４H５H或５H的Ⅱ类公差
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF L22-433-2000
航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹４H公差等级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-434-2000
航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO螺纹左旋４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-436-2000
航空用螺栓和螺母.带标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径４H５H或5H进行公差分类
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-437-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径4H5H或5H进行公差分类
(Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-438-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径4H５H或５H进行公差
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-439-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-440-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-441-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-442-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-443-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-444-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-451-2000
航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.标准厚度.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-453-2000
航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-455-2000
航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-457-2000
航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.ISO M或ISO MJ螺纹.４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-458-2000
航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.左旋ISO M或ISO MJ螺纹.４H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-461-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.ISO M或ISO MJ细牙螺纹.４H５H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF L22-462-2000
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.左旋ISO M或ISO MJ细牙螺纹.４H５H公差级
(Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF L22-512-2001
航空螺栓和螺母.MoS2润滑的、镀镉、钢制、带扩孔和系留垫圈的、ISO M或ISO MJ螺纹的自锁定六角螺母.等级:11
(Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian)
NF L22-519-2000
航空用螺栓和螺母.自锁十二角头螺母.ISO M或ISO