船舶防火控制图识别符号.docx

船舶防火控制图识别符号*
结构防火识别符号 A 23/Res.952
序号
识别符号
名称
使用说明
1.1

A 级分隔
A-class division

1.2

B 级分隔
B-class division

1.3

主竖区
Main vertical zone

1.4

A 级铰链防火门
A-class hinged fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
*符号的图注和解释应是防火控制图的组成部分，包括在控制图中的一系列符号和适当的解释，还可包括附加信息，如在固定式灭火系统中使用的灭火剂。
* A legend of symbols and explanations should be a constituent part of any fire control plan and contain a list of the graphical symbols used in the plan, together with the appropriate explanations, and may include additional special information such as the type of extinguishing media used in fixed fire-extinguishing systems.
1.5

B 级铰链防火门
B-class hinged fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in
the case of a semi-watertight door.
1.6

铰链A-class hinged self-closing fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.7

铰链B-class hinged self-closing fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.8

A 级滑动防火门
A-class sliding fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.9

B 级滑动防火门
B-class sliding fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.10

A 级自闭式滑动防火门
A-class self-closing sliding fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.11

B 级自闭式滑动防火门
B-class self-closing sliding fire door
符号应标在门的位置上，且显示防火门的实际方位。
如是水密门，则在符号右侧加上WT字样。
如是半水密门，则在符号右侧加上SWT 字样。
The symbol should be at the door position and should show the actual direction of the door.
Add WT to the right side of the symbol in the case of a watertight door.
Add SWT to the right side of the symbol in the case of a semi-watertight door.
1.12

遥控通风或关闭
Ventilation remote control or shut-off
圆圈和符号右侧字母的颜色表示：
A = 起居处所和服务处所为蓝色；
M = 机器处所为绿色；
C = 装货处所为黄色。
Colour of the circle and a letter at the right side of the symbol should indicate as follows:
A = blue for accommodation and service spaces;
M = green for machinery spaces;
C = yellow for cargo spaces.
1.13

遥控天窗
Remote control for skylight

1.14

遥控水密门或防火门
Remote control for watertight doors or fire doors
在符号右侧加上WT 字样表示遥控水密门，加上FD 字样表示遥控防火门。
Add WT to the right side of the symbol to indicate remote control for watertight doors or FD to indicate remote control for fire doors.
1.15

挡火闸
Fire damper
码Colour of the circle and a letter at the right side of the symbol should indicate as follows:
A = blue for accommodation and service spaces;
M = green for machinery spaces;
C = yellow for cargo spaces.
Identification number of the damper may be shown at the bottom of the symbol.
1.16

通风进口或出口的关闭装置
Closing device for ventilation inlet or outlet
码Colour of the circle and a letter at the right side of the symbol should indicate as follows:
A = blue for accommodation and service spaces;
M = green for machinery spaces;
C = yellow for cargo spaces.
Identification number of the closing device may be shown at the bottom of the symbol.
1.17

遥控挡火闸
Remote control for fire damper(s)
码Colour of the circle and a letter at the right side of the symbol should indicate as follows:
A = blue for accommodation and service spaces;
M = green for machinery spaces;
C = yellow for cargo spaces.
Identification number of the damper may be shown.
1.18

通风进口或出口的遥控关闭装置
Remote control for closing device(s) for ventilation inlet and outlet
码Colour of the circle and a letter at the right side of the symbol should indicate as follows:
A = blue for accommodation and service spaces;
M = green for machinery spaces;
C = yellow for cargo spaces.
Identification number of the closing device(s) may be shown.

消防装置识别符号
序号
识别符号
名称
使用说明
2.1

防火控制图
Fire protection appliances or structural fire protection plan

2.2

遥控消防泵
Remote control for fire pump(s)

2.3

消防泵
Fire pump(s)
类型、出水量和压力The type, quantity of water delivered per time unit, and pressure head should be indicated either at the right side of the symbol or in the legend.
2.4

遥控应急消防泵或由应急电源供电的消防泵
Remote control for emergency fire pump or fire pump supplied by the emergency source of power

2.5

应急消防泵
Emergency fire pump
类型、出水量和压力The type, quantity of water delivered per time unit, and pressure head should be indicated either at the right side of the symbol or in the legend.
2.6

燃油泵遥控关闭
Fuel pump(s) remote shut-off

2.7

滑油泵遥控关闭
Lube oil pump(s) remote shut-off

2.8

遥控舱底泵
Remote control for bilge pump(s)

2.9

遥控应急舱底泵
Remote control for emergency bilge pump

2.10

遥控燃油阀
Remote control for fuel oil valves

1.11

遥控滑油阀
Remote control for lube oil valves

2.12

遥控消防泵阀
Remote control for fire pump valve(s)

2.13

遥控施放站
Remote release station
在符号底部标明所保护的处所。灭火剂种类应在符号下端用颜色指示，并在符号右侧用一个字母标明：灰色 — CO2 代表二氧化碳或N代表氮气，棕色 — H 代表除CO2 或N 以外的气体（标明气体种类），白色 — P 代表干粉，绿色 — W 代表水。
Indicate at the bottom of the symbol the protected space. Extinguishing media should be colour coded in the lower part of the symbol and be indicated by a letter at the right side of the symbol as follows:
grey —CO2 for carbon dioxide or N for nitrogen, brown —H for gas other than CO2 or N (type of gas to be indicated), white —P for powder, green —W for water.
2.14

国际通岸接头
International shore connection

2.15

火Fire hydrant

2.16

消防总管隔离阀
Fire main section valve
相关号码Indicate the reference number of the valve at the right side of the symbol.
2.17

自动喷水器隔离阀
Sprinkler section valve
相关号码等效的Indicate the reference number of the valve at the right side of the symbol.
This symbol may also be applied to equivalent water-extinguishing systems.
Valves for automatic dry-pipe sprinkler systems should be indicated in the legend.
2.18

干粉隔离阀
Powder section valve
相关号码Indicate the reference number of the valve at the right side of the symbol.
2.19

泡沫隔离阀
Foam section valve
相关号码Indicate the reference number of the valve at the right side of the symbol.
2.20

固定式灭火装置
Fixed fire extinguishing installation
灭火剂种类应在符号中部用颜色指示，并在符号上方用一个字母标明：灰色 — CO2 代表二氧化碳或N代表氮气，黄色 — F 代表泡沫，棕色 — H代表除CO2 或N以外的气体（标明气体种类），白色 — P 代表干粉，绿色 — W 代表水。
Extinguishing media should be colour coded in the centre part of the symbol and indicated by a letter on top of the symbol as follows:
grey — CO2 for carbon dioxide or N for nitrogen, yellow —F for foam, brown —H for gas other than CO2 or N (type of gas to be indicated), white —P for powder, green —W for water.
2.21

固定式灭火钢瓶组
Fixed fire extinguishing battery
灭火剂种类应在符号下端用颜色指示，并在符号上方用一个字母标明：灰色 — CO2 代表二氧化碳或N代表氮气，黄色 — F 代表泡沫，棕色 — H代表除CO2 或N以外的气体（标明气体种类），白色 — P 代表干粉，绿色 — W 代表水。
Extinguishing media should be colour-coded in the lower part of the symbol and indicated by a letter on top of the symbol as follows:
Grey — CO2 for carbon dioxide or N for nitrogen, yellow —F for foam, brown —H for gas other than CO2 or N (type of gas to be indicated), white — P for powder, green — W for water.
2.22

容器
Fixed fire extinguishing bottle, placed in protected area
灭火剂种类应在符号下端用颜色指示，并在符号上方用一个字母标明：灰色 — CO2 代表二氧化碳或N代表氮气，黄色 — F 代表泡沫，棕色 — H代表除CO2 或N以外的气体（标明气体种类），白色 — P 代表干粉，绿色 — W 代表水。
Extinguishing media should be colourcoded in the centre part of the symbol and indicated by a letter on top of the symbol as follows:
grey —CO2 for carbon dioxide or N for nitrogen, yellow —F for foam, brown . H for gas other than CO2 or N (type of gas to be indicated), white —P for powder, green —W for water.
2.23

高倍泡沫供应导管（排出管）
High expansion foam supply trunk (outlet)
如有必要，在符号底部标明所保护的处所。
Indicate at the bottom of the symbol the protected space, if necessary.
2.24

水雾系统阀
Water spray system valves
如有必要，在符号底部标明所保护的处所。
Indicate at the bottom of the symbol the protected space, if necessary.
2.25

惰性气体装置
Inert gas installation

2.26

消防炮
Monitor
灭火剂种类应在符号中部用颜色指示，并在符号上方用一个字母标明：黄色 — F 代表泡沫，白色 — P代表干粉，绿色 — W 代表水。
Extinguishing media should be colour coded in the centre part of the symbol and indicated by a letter on the right side of the symbol as follows:
yellow — F for foam, white — P for powder, green — W for water.
2.27

水带Fire hose and nozzle
水带个类的水带Indicate the hose length at the right side of the symbol; where only one type of hose is used, the information can be shown in the legend. Extinguishing media should be colour-coded in the lower part of the symbol and indicated by a letter on the right side of the symbol as follows:
yellow F for foam, white P for powder, green W for water.
2.28

灭火器
Fire extinguisher
在符号右侧标明灭火剂（CO2 代表二氧化碳，F 代表泡沫，H 代表除CO2 以外的气体（标明气体种类），P 代表干粉，W 代表水）和容量（气体和干粉用KG 表示，水和泡沫用L 表示）。灭火剂种类应在符号下端用颜色指示：灰色代表二氧化碳，黄色代表泡沫，棕色代表除CO2 以外的气体，白色代表干粉，绿色代表水。
Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powder, W for water) and capacity (kg for gas and powder, litres for water and foam) at the right side of the symbol. Media should be colour-coded in the lower part of the symbol as follows:
grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water.
2.29

推车式灭火器
Wheeled fire extinguisher
在符号右侧标明灭火剂（CO2 代表二氧化碳，F 代表泡沫，H 代表除CO2 以外的气体（标明气体种类），P 代表干粉，W 代表水）和容量（气体和干粉用KG 表示，水和泡沫用L 表示）。灭火剂种类应在符号下端用颜色指示：灰色代表二氧化碳，黄色代表泡沫，棕色代表除CO2 以外的气体，白色代表干粉，绿色代表水。
Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powder, W for water) and capacity (kg for gas and powder, litres for water and foam) at the right side of the symbol. Media should be colour-coded in the centre part of the symbol as follows:
grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water.
2.30

装置容器
Portable foam applicator unit or relevant spare tank(s)

2.31

消防贮存箱
Fire locker
在符号右侧标明消防贮存箱号。每个消防贮存箱里的主要贮存物应在图中标明。
Indicate the number of the fire locker at the right side of the symbol. The principal contents of each fire locker should be indicated in the legend.
2.32

由灭火系统保护的处所或处所群
Space or group of spaces protected by fire extinguishing system
种类词尾灭火Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powder, W for water, S for sprinkler or high pressure water extinguishing system) and capacity (kg for gas and powder, litres for water and foam) at the top of the symbol. Add suffix.L. for fixed local application fire fighting system. Media should be colour-coded in the symbol as follows:
grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water, orange for sprinkler or high pressure water extinguishing system.
2.33

水雾枪
Water fog applicator

2.34

应急电源（发电机）
Emergency source of electrical power (generator)

2.35

应急电源（电池）
Emergency source of electrical power (battery)

2.36

应急配电板
Emergency switchboard

2.37

压缩空气呼吸装置
Air compressor for breathing devices

2.38

探火和报警系统控制屏
Control panel for fire detection and alarm system

2.39

火警按钮/开关
Push button/switch for general alarm

2.40

手动报警按钮点
Manually operated call point
由主管机关自行决定是否使用本符号。
The use of this symbol is optional at the discretion of the competent authority.
2.41

由感烟探测器监控的处所或处所群
Space or group of spaces monitored by smoke detector(s)
应标明受监控的处所。
The space(s) should be identified.
2.42

由感温探测器监控的处所或处所群
Space or group of spaces monitored by heat detector(s)
应标明受监控的处所。
The space(s) should be identified.
2.43

由火焰探测器监控的处所或处所群
Space or group of spaces monitored by flame detector(s)
应标明受监控的处所。
The space(s) should be identified.
2.44

由可燃气体探测器监控的处所
Space monitored by gas detector(s)

脱险通道和相关脱险设施的识别符号
3.1

主脱险路线
Primary escape route

3.2

副脱险路线
Secondary escape route

3.3

紧急逃生呼吸装置(EEBD)
Emergency escape breathing device (EEBD)
在符号右侧标明所装载的EEBD 数量。
Indicate the quantity of the EEBDs stowed at the right side of the symbol.

此为A.952(23)号决议（2003 年12 月5 日通过）
Resolution A.952(23) Adopted on 5 December 2003 (Agenda item 17)

同意于2004 年1 月1 日之前建造的船舶可继续配备应用A.654（16）决议中所列识别符
号的防火控制图；
AGREES that ships constructed before 1 January 2004 may continue to carry fire control plans that use the graphical symbols contained in resolution A.654(16);