1、FFC線材與連接器結合作業標準書Page 14.此處雙面膠底層紙需撕掉.Page 15.雙面膠底層紙撕離情形.Page 16.雙面膠底層紙撕離情形.Page 17.以製具將貼黏處緊壓.Page 18.已完成FFC線材背面圖.Page 19.已完成FFC線材正面圖.Standard Of Process(1)空白FFC雙面膠帶所貼黏位置Standard Of Process(2)(a)在FFC上貼上雙面膠帶其規格為L:30.5mmW:6mm(b)FFC上左右已裁邊Standard Of Process(3)連接器雙面膠帶所貼黏位置其規格為:L:30.5mmW:2.9mmStandard Of P
2、rocess(4)已貼黏完成Standard Of Process(5)字形防貼黏製具將FFC線材插入連接器內Standard Of Process(6)將FFC線材置入適當位置Standard Of Process(7)將雙面膠帶底層紙撕掉Standard Of Process(8)字型防貼黏製具Standard Of Process(9)將型防沾黏製具置入以防止貼黏其用意為較好移動Standard Of Process(10)方便FFC線材移動並防止貼黏Standard Of Process(11)將FFC線材置放於適當位置並調整其左右空間其空間需相同Standard Of Process
3、(12)將型防沾黏製具抽離Standard Of Process(13)雙面膠貼黏處需以製具壓緊Standard Of Process(14)此處雙面膠底層紙需撕掉Standard Of Process(15)雙面膠底層紙撕離情形Standard Of Process(16)雙面膠底層紙其撕離情形雙面膠底層紙Standard Of Process(17)以製具將貼黏處緊壓Standard Of Process(18)已完成FFC線材背面圖Standard Of Process(19)已完成FFC線材正面圖Standard Of Process(20)Thanks For Your Supporting