资源描述
Your Electronic Cigarette comes with a blank cartridge installed on the end of the atomizer to protect it during shipment. Remove the blank cartridge before use.
Unwrap a new, pre-filled cartridge and remove the rubber plug on the end. Install the new cartridge on the end of the atomizer. Make sure cartridge is mounted completely on the atomizer to insure the best performance. Your E-Cigarette is ready for use.
After approximately 20-40 inhalations your cartridge will be ready for refilling. Remove the cartridge from the end of the atomizer and place 5 drops into the cartridge. Mount the cartridge onto atomizer. Do not overfill or prematurely fill the cartridge.
It is time to recharge your battery when the light on the end begins to flash. Remove the battery by unscrewing it from the atomizer.
Screw the end of your discharged battery into the charger. On your first charge make sure to leave the battery on the charger for a full 5 hours. Subsequent chargings should take about 2 hours. The light on the charger will change color from red to green to indicate charge completion.
Remember to keep your E-Cigarette pointed down when in use. Gravity pulls the E-liquid down onto the atomizer which in turn produces vapor as you inhale. Keeping your unit pointed down will prevent your atomizer from getting dry.
展开阅读全文