radware负载均衡器常用维护查询命令.docx

资源描述

命令行维护命令 11.1 查看接口地址 appdirector#net ip Interface Table IP Address Network Mask If Number VlanTag 1.1.1.1 255.255.255.0 8 0 10.130.31.51 255.255.255.224 17 0 11.2 查看路由表 appdirector#net route table Routing Table Destination Network Mask Next Hop Interface Type Address Index 0.0.0.0 0.0.0.0 10.130.31.62 17 remote 1.1.1.0 255.255.255.0 0.0.0.0 8 local 10.130.31.32 255.255.255.224 0.0.0.0 17 local 11.3 查看CPU appdirector #sys os cpu Device Resource Utilization RS Resource Utilization : 0 RE Resource Utilization : 0 Maximum Utilization : 0 如果有一项值超过90,就需要引起注意 11.4 查看WSD的全部配置 WSD#sys config immediate ! !Device Configuration !Date: 19-03-2007 12:07:07 !DeviceDescription: AppDirector Global with Cookie Persistency !Base MAC Address: 00:03:b2:2e:20:40 !Software Version: 1.03.04 (build Feb 14 2007, 22:29:01) ! net route table create 0.0.0.0 0.0.0.0 10.130.31.62 -i 17 manage snmp community-table create 0.0.0.0 public -ca super -st trapsEnable system tune bridge-fft-table set 1024 11.5 查看当前设备的版本信息 # system device info 11.6 查看当前设备的License #system license get 11.7 查看端口流量 # system inf-stats 11.8 查看2层端口状态 #net l2-information 11.9 显示日志信息 #sys logfile 命令行维护命令查看接口地址 appdirector#net ip Interface Table IP Address Network Mask If Number VlanTag 1.1.1.1 255.255.255.0 8 0 10.130.31.51 255.255.255.224 17 0 查看路由表 appdirector#net route table Routing Table Destination Network Mask Next Hop Interface Type Address Index 0.0.0.0 0.0.0.0 10.130.31.62 17 remote 1.1.1.0 255.255.255.0 0.0.0.0 8 local 10.130.31.32 255.255.255.224 0.0.0.0 17 local 查看CPU appdirector #sys os cpu Device Resource Utilization RS Resource Utilization : 0 RE Resource Utilization : 0 Maximum Utilization : 0 如果有一项值超过90,就需要引起注意查看服务器的连接用户数红色部分表当前连接的用户数. appdirector # appdirector farm server table Server Table Farm Address Server Address Server Name Operational Attached Users Status 10.130.31.33 10.130.31.34 server-1 Active 3 10.130.31.33 10.130.31.35 server-2 Active 4 10.130.31.33 10.130.31.36 server-3 Active 0 10.130.31.33 10.130.31.37 server-4 Active 0 10.130.31.33 10.130.31.38 server-5 Active 0 10.130.31.33 10.130.31.39 server-6 Active 0 10.130.31.33 10.130.31.40 server-7 Active 0 10.130.31.33 10.130.31.41 server-8 Active 0 查看AppDirector的会话表 appdirector # appdirector client table RS CLIENTS Table Total number of clients: 2 Client Address Src P Dst P Farm Address Server Address Attach Date NAT Address NAT P Srv P L4 Policy Addr Client Type Attach Time 10.130. 31.226 56887 161 10.130. 31. 33 10.130. 31. 34 02-03-2006 0. 0. 0. 0 0 161 0. 0. 0. 0 Dynamic 12:01:02 10.130. 31.226 0 0 10.130. 31. 33 10.130. 31. 34 02-03-2006 0. 0. 0. 0 0 0 0. 0. 0. 0 Dynamic 11:44:13 注意观察客户表的大小, 不要超过太大值. 一般情况下, 几千条是正常的.这个表的大小与Farm中设置的老化时间有很大关系, 老化时间越短, 表也就越小. 查看AppDirector的动态Cookie表 appdirector # sys interal appdirector session-id-info 查看AppDirector的命令全部配置 appdirector#sys config immediate ! !Device Configuration !Date: 19-03-2007 12:07:07 !DeviceDescription: AppDirector Global with Cookie Persistency !Base MAC Address: 00:03:b2:2e:20:40 !Software Version: 1.03.04 (build Feb 14 2007, 22:29:01) ! net route table create 0.0.0.0 0.0.0.0 10.130.31.62 -i 17 manage snmp community-table create 0.0.0.0 public -ca super -st trapsEnable system tune bridge-fft-table set 1024 常用系统命令 1、消除命令行显示乱码命令 manage terminal grid-mode set off 由于系统语言的区别，导致命令行制表符显示乱码，以上命令消除了制表符，使得负载均衡设备正常输出字符 2、查看ip地址 AppDirector#net ip-interface net ip-interface help: <get> <IP Address> set <IP Address> <-switch value> destroy/del <IP Address> create/add <IP Address> <Network Mask> <If Number> <-switch value> help <-switch> Switches: -i : If Number -m : Network Mask -f : Fwd Broadcast -ba : Broadcast Addr -v : VlanTag 3、查看负载均衡设备路由 AppDirector#net route table net route table help: <get> <Destination Address> <Network Mask> <Next Hop> set <Destination Address> <Network Mask> <Next Hop> <-switch value> destroy/del <Destination Address> <Network Mask> <Next Hop> create/add <Destination Address> <Network Mask> <Next Hop> <-switch value> help <-switch> Switches: -i : Interface Index -t : Type -m : Metric 4、查看物理端口状态 AppDirector#system inf-stats 看物理端口是否有丢包或者错误数据包 5、查看vrrp主备工作状态 AppDirector#redundancy vrrp virtual-routers 6、查看cpu利用率 AppDirector#system os cpu 对于AS4设备（内网web层）的查看命令是 system uti 7、查看负载均衡设备clent table client table是负载均衡设备总的会话集合 AppDirector#appdirector client table 会话表的总数量在第一行： Display the client table: Client Address: The client's address Src P: The client's source port Dst P: The destination port to which the client has connected Farm Name: The farm name of the client Attach Date: The date of the client first packet Server Address: The address of the server to which the client has been redirected Client Address: The client's NAT address NAT P: The client's NAT source port Srv P: The port on the server to which the client was redirected VIP: The VIP address of the client Attach Time: The time of the client first packet Client Type: The type of the connection 8、查看每个servers的会话数以及健康情况 AppDirector#appdirector farm server table Not in service表示健康检查失败，不发流量给它 Active表示健康检查成功，发流量给它 appdirector farm server table help: <get> <Farm Name> <Server Address> <Server Port> set <Farm Name> <Server Address> <Server Port> <-switch value> destroy/del <Farm Name> <Server Address> <Server Port> create/add <Farm Name> <Server Address> <Server Port> <-switch value> help <-switch> Switches: -sn : Server Name -w : Weight -om : Operation Mode -st : Type -cl : Connection Limit -as : Admin Status -bl : Bandwidth Limit -rt : Redirect To -cn : Client NAT -sd : Server Description -rs : Response Threshold [ms] -ba : Backup Server Address -pm : Backup Preemption -nr : Client NAT Address Range 9、查看系统配置 AppDirector#system config immediate

展开阅读全文