美国工业用紧固件学会-紧固件标准目录(中英).doc

中文名称: 美国工业用紧固件学会
英文名称: Industrial Fasteners Institute
简介: IFI成立于1931年，原名为美国螺栓、螺母和铆钉制造商学会(American Institute of Bolt, Nut and Rivet Manufacturers)。由北美螺栓、螺母、螺丝、铆钉及工业用各种特殊型号的紧固件制造商组成。与国内和国际技术组织合作，共同制订紧固件标准和技术规程，确保用户以最低的装配成本实现最大的工程效益和可靠性。紧固件和元件共有标准件500,000多个，特殊形式、尺寸的专用件3，000，000 多个。出版《紧固件标准集》，这是机械紧固件用户的主要参考书。书中收集了有关的标准，提供了所有各种形式通用商业工业紧固件的情况。各行业的设计工程师和生产经理都使用这本标准集。标准编号：标准代号IFI+三位数字例：IFI-153-2003 Stainless Steel Wire and Rods for Mechanical Fasteners 机械紧固件的不锈钢线和杆 IFI通过其网站提供Technical Reference Books、Additional Reference Books、Information Papers、VCR Tapes、IFI Standards、Fastener Quality Act Compliance Guide等信息服务。

IFI第三版紧固件标准目录(米制)
IFI第三版紧固件标准目录(米制) 发布时间：2007-01-25
  A部分：螺纹
标准代号
标准名称(中文)
标准名称(英文)
IFI
公制螺纹基础
Basics of Metric Screw Threads
ASME B1.7M-1984(R2001)
螺纹的术语、定义和字母代号
Nomenclature, Definitions, and Letter Symbols for Screw Threads Revision of ANSI B1.7-1977 
ASME B1.13M-2001
米制螺纹：M型
Metric Screw Threads: M Profile
ASME B1.3M-1992(R2001)
允许尺寸的螺纹测量系统 英制和米制螺纹（UN, UNR, UNJ, M, 和 MJ）
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) Errata - 1994
ASME B1.16M-1984(R2001)
米制M型螺纹的量规和测量
Gages and Gaging for Metric M Screw Threads Revision of ANSI B1.16-1972
B部分：材料和涂镀
IFI
紧固件材料选择
Selecting Fastener Materials
IFI
螺栓和螺母的匹配
Bolt and Nut Compatibility
IFI
腐蚀作用
Corrosion
IFI
镀层和涂层
Platings and Coatings
ASTM F568M-2004
碳合金钢外螺纹米制紧固件规格
Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM A563M-2004
碳素钢和合金钢螺母规格(米制)
Standard Specification for Carbon and Alloy Steel Nuts [Metric]
ASTM F738M-2002
不锈钢金属螺栓、螺钉及螺柱规格(米制) 
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs 
ASTM F836M-2002
米制1型不锈钢螺母规格
Standard Specification for Style 1 Stainless Steel Metric Nuts
ASTM F468M-2006
普通有色金属螺栓、六角帽螺钉和螺柱规格(米制)
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
ASTM F467M-2006
普通有色金属螺母规格(米制)
Standard Specification for Nonferrous Nuts for General Use [Metric]
ASTM F788/F788M-2005
英制和米制系列螺栓、螺钉和柱螺栓表面不连续性规格
Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
ASTM F812/F812M-2003
英制和米制系列螺母表面不连续性规格
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series 
ASTM F606M-2005
实施测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械性能的试验方法(米制)
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric
ASTM F871M-1998
加螺纹元部件电镀层标准规范(米制)
Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
ASTM B633-1998e1 
钢铁表面电解沉积锌镀层规格 
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B766-1986(2003) 
镉电沉积镀层规格 
Standard Specification for Electrodeposited Coatings of Cadmium
ASTM A153/A153M-2005
钢铁构件镀锌层（热浸）规格
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM B695-1991
钢铁表面锌机械沉积镀层规格
  Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel 
ASTM B696-2000(2004)e1
镉机械沉积锌镀层的规格
Standard Specification for Coatings of Cadmium Mechanically Deposited
ASTM F1136-2004
紧固件用铬/锌防蚀镀层的规格
Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners 
ASTM F1135-1999(2004)
紧固件用铬酸镉或锌有机防蚀镀层的规格
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
ASTM F1137-2000
紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层的规格 
Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
C部分：螺栓、螺钉和螺柱
ASME B18.2.3.1M-2005
米制六角帽螺钉
Metric Hex Cap Screws
ASME B18.2.3.2M-2005
米制成形六角螺钉
Metric Formed Hex Screws 
ASME B18.2.3.3M-1979(R2001) 
米制粗六角螺钉
Metric Heavy Hex Screws Errata - April 1981
ASME B18.2.3.4M-2001
米制六角法兰螺钉
Metric Hex Flange Screws Supersedes IFI 536:1982
ASME B18.2.3.5M-1979(R2001) 
米制六角螺栓 
Metric Hex Bolts Errata - May 1981 
ASME B18.2.3.6M-1979(R1995) 
米制粗六角螺栓
Metric Heavy Hex Bolts Errata - April 1981
ASME B18.2.3.8M-1981(R1999) 
米制六角木螺钉
Metric Hex Lag Screws 
ASME B18.2.3.9M-2001
米制粗六角法兰螺钉
Metric Heavy Hex Flange Screws Supersedes IFI 538:1982 
ASME B18.2.3.10M-96 
方头螺栓（米制系列）
Square Head Bolts (Metric Series)
IFI 528-1999

Metric Studs and Bent Bolts
ASME B18.5.2.1M-1996(R2003) 
米制圆头短方颈螺栓
Metric Round Head Short Square Neck Bolts Erratum - October 2001; Erratum - May 2003 
ASME B18.5.2.2M-1982(R1993) 
米制圆头方颈螺栓
Metric Round Head Square Neck Bolts 
IFI 544-1998

Metric Round Head Ribbed Neck Bolts 
ASME B18.5.2.3M-1990(R2003) 
大圆头方颈螺栓（米制系列）
Round Head Square Neck Bolts with Large Head (Metric Series) 
ASME B18.2.7.1M-2002
米制12键槽凸缘螺钉
Metric 12-Spline Flange Screws Erratum 12/2002
D部分：螺母

ASME B18.2.4.1M-2002
米制1型六角螺母
Metric Hex Nuts, Style 1
ASME B18.2.4.2M-2005
米制2型六角螺母
Metric Hex Nuts, Style 2 
ASME B18.2.4.3M-1979(R2001)
米制六角开槽螺母 
Metric Slotted Hex Nuts Errata - May 1981 
ASME B18.2.4.4M-1982(R1999)
米制六角凸缘螺母
Metric Hex Flange Nuts 
ASME B18.2.4.5M-1979(R2003) 
米制六角锁紧螺母
Metric Hex Jam Nuts Errata - May 1981
ASME B18.2.4.6M-1979(R2003)
米制粗六角螺母
Metric Heavy Hex Nuts Errata - April 1981 
E部分：有效力矩紧固件
IFI
自锁紧固件介绍
Introduction to Locking Fasteners
IFI-524-1996
非金属嵌件公制有效力矩型螺钉性能试验方法
Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws
IFI-525-1996
公制化学涂镀有效力矩型螺钉性能试验方法
Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque Screws
ASME B18.16.3M-1998
有效力矩型米制钢六角螺母和六角法兰螺母的尺寸要求
Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
ASME B18.16.1M-1979
有效力矩型米制钢六角螺母和六角法兰螺母的机械和性能要求
Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Errata - December 1980 R(2001)
ASME B18.16.2M-1979
有效力矩型米制钢六角螺母和六角法兰螺母的转矩应力试验要求*
Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts R(2001)
IFI-543-1999
公制内外螺纹紧固件扭-拉关系评估测试
Test for Evaluating the Torque-Tension Relationship on Both External and Interal Metric Threaded Fasteners
F部分:高强度螺栓STRUCTURAL BOLTING
IFI
高强度结构螺栓的解释和说明
COMMENTARY ON HIGH STRENGTH STRUCTURAL BOLTING
ASME B18.2.3.7M-1979(R2001) 
米制粗六角结构螺栓 
Metric Heavy Hex Structural Bolts Errata - April 1981
ASTM A325M-2005
最小抗拉强度为830 MPa的热处理结构钢螺栓规格（公制）
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
ASTM A490M-2004a
结构钢接合用等级为10.9和10.9.3的高强度螺栓规格(米制) 
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
ASTM F959M-2004
与结构紧固件一起使用的可压缩垫圈型直接拉力指示器规格(米制)
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
G部分： 凹头螺钉
IFI
小螺钉介绍
An Introduction to Small Screws
ASME B18.6.7M-1999
米制机器螺钉 
Metric Machine Screws 2000 Edition; Revision of ASME B18.6.7M-1985(1993); Supersedes IFI 513: 1981
ASME B18.6.5M-2000
米制螺纹成型和螺纹切削自攻螺钉
Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986
SAE J1237-2001
公制自挤螺钉
Metric Thread Rolling Screws
IFI
渗碳层深度测定的推荐方法
Recommended Technique for Measuing Case Depth
IFI-504 1997
公制自钻自攻钉
Metric Self-Drilling Tapping Screws
ASME B18.13.1M-1998 (R2003)
螺钉和垫圈组件 Sems(米制系列) 
Screw and Washer Assemblies - Sems (Metric Series) Supersedes IFI 531: 1982
H部分：机螺钉
ASME B18.3.1M-1986(R2002)
内六角螺钉（米制系列）
Socket Head Cap Screws (Metric Series)
ASME B18.3.3M-1986(R2002) 
内六角带肩螺钉（米制系列）
Hexagon Socket Head Shoulder Screws (Metric Series) 
ASME B18.3.4M-1986(R2002) 
内六角圆头螺钉（米制系列）
Hexagon Socket Button Head Cap Screws (Metric Series) 
ASME B18.3.5M-1986(R2002)
内六角扁平沉头螺钉（米制系列）
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) 
ASME B18.3.6M-1986(R2002)
米制系列内六角紧定螺钉 
Metric Series Socket Set Screws 
ASME B18.3.2M-1979(R2003) 
米制系列六角板手和板手头
Metric Series Hexagon Keys and Bits 
ASTM A574M-2004 
合金钢内六角螺钉(米制) 
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] 
ASTM F912M-2004 
合金凹头螺钉规格(米制) 
Standard Specification for Alloy Steel Socket Set Screws [Metric] 
ASTM F880M-2002
不锈钢凹头螺钉规格(米制)
Standard Specification for Stainless Steel Socket Set Screws [Metric] 
ASTM F879M-2002a 
不锈钢管座凸头及扁平埋头六角螺钉规格(米制)
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] 
ASTM F835M-2004 
合金钢管座凸头及扁平埋头六角螺钉规格(米制) 
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] 
ASTM F837M-2002a 
不锈钢内六角螺钉规格(米制)
Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] 
I部分:铆钉
IFI
铆钉介绍
An Introduction to Rivets
IFI-110/550
盲铆钉相关术语表
Glossary of Terms Related to Blind Rivets
IFI-505
公制盲孔抽芯铆钉
Metric Break Mandrel Blind Rivets
IFI-509
公制闭端盲孔抽芯铆钉
Metric Break Mandrel Closed End Blind Rivets
IFI-520

Metric Pull Through Mandrel Blind Rivets
IFI-522
公制盲铆钉的机械性能试验
Mechanical Testing of Metric Blind Rivets
IFI-530
米制钢结构开口自锁抽芯盲铆钉
Metric Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
IFI-551
米制钢结构抽芯自锁盲铆钉
Metric Structural Flush Bresk Pull Mandrel Self-Plugging  Blind Rivets
IFI-552
米制双鼓抽芯自锁盲铆钉
Metric Multi-Grip Flush Bresk Pull Mandrel Self-Plugging  Blind Rivets
IFI-553
公制击芯铆钉
Metric Drive Pin  Blind Rivets
ASME B18.1.3M-1983(R2001)
  米制小型实心铆钉(公称直径12mm及以下) 
Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller Errata - October 1985 
ASME B18.7.1M-1984(R2000) 
米制通用半空心铆钉
Metric General Purpose Semi-Tubular Rivets
J部分:销和垫圈
IFI
销和垫圈介绍
An Introduction to Pins and Washers
ANSI/ASME B18.8.3M-1995
米制系列螺旋弹簧销 *
Spring Pins - Coiled Type (Metric Series)
ANSI/ASME B18.8.4M-1994
有槽弹簧销(米制系列) *
Spring Pins - Slotted (Metric Series)
ANSI/ASME B18.8.5M-1999
米制淬硬圆头机械定位销钉
Machine Dowel Pins - Hardened Ground (Metric Series)
ANSI/ASME B18.8.6M-1999
米制系列开尾销 *
Metric Cotter Pins
ANSI/ASME B18.8.7M-1999
无头U形夹销(米制系列) *
Metric Headless Clevis Pins
ANSI/ASME B18.8.8M-1999
有夹U形夹销(米制系列) *
Metric Headed Clevis Pins
ASME B18.22M-1981(R2000)
  米制平垫圈 
Metric Plain Washers 
ASTM F436M-2004
硬化钢垫片规格(米制)
Standard Specification for Hardened Steel Washers [Metric]
IFI-534
公制斜垫圈
Metric Beveled Washers 
ASME B18.21.2M-1999 
  锁紧垫圈（米制系列） 
Lock Washers (Metric Series) Supersedes IFI 532: 1982
K部分:自攻螺钉
IFI
公制机械紧固件单位应用规定
Rules for the Use Units Applicable to Metric Mechanical Fasteners
IFI
什么是螺钉？什么是螺栓？
What is a Screw? What is a Bolt?
IFI-527
公制螺纹紧固件通孔
Clearance Holes for Metric Threaed Fasteners
ASME B18.6.5M-2000
米制螺纹成型和螺纹切削自攻螺钉
  Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 
IFI
IFI工程委员会推荐孔径－公制D,F,G,T型自攻钉
IFI Engineering Committee Recommended Hole Sizes-Metric Types D,F,G,T Tapping Screws
IFI
ISO体系的极限与配合
ISO System of Limits and Fits
SAE J121M-1997
硬化并回火后螺纹紧固件表面脱碳层
Decarburization in Hardened and Tempered Metric Threaded Fasteners
IFI-142
氢脆风险的处理
Hydrogen Embrittlement Risk Management
IFI
公制紧固件的重量
Weights of Metric Fasteners
IFI
紧固件术语
Fasteners Terminology
IFI
标准和规范
Standards and Specifications
IFI
加工过程取样频率
In-Process Sampling Frequency
L部分:质量保证
IFI
紧固件质量保证的介绍
INTRODUCTORY NOTES FASTENER QUALITY ASSURANCE
ASME B18.18.1M-1987(R1999) 
通用紧固件的检验和质量保证
Inspection and Quality Assurance for General Purpose Fasteners 
ASME B18.18.2M-1987(R1999)
大型机器组装紧固件的检验和质量保证 
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners 
ASME B18.18.2M SUPPLEMENT-1994
ASME B18.18.2m-1987大型机器组装紧固件的检验和质量保证的补充 
Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners 
ASME B18.18.3M-1987(R1999) 
专用紧固件的检验和质量保证
Inspection and Quality Assurance for Special Purpose Fasteners 
ASME B18.18.4M-1987(R1999) 
高度专业化设计应用中紧固件的检验和质量保证
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications
ASME B18.18.5M-1998(R2003)
检验和质量保证计划要求过程中的检验和控制 
Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls 
ASME B18.18.6M-1998(R2003)
在第三方认可体系中生产的紧固件的质量保证计划 
Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System 
ASME B18.18.7M-1998(R2003) 
在消费者核准的控制计划中生产的紧固件的质量保证计划
Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan