MTM-form(PE53912)教学内容.xls

Method Time Measurement(MTM)Study FormProcess:Coil WindingStudy No:MTM-0001Part No:PE-53912Page:01 Of 01MI No:53912-10030Analysisee:Rock LiuLocation:PMC C/L23Date:Sept.3 2001Item Description for left handAnalysisTMUTotalTMUOTSubOT TMU AnalysisDescription for right hand1伸向计数器归零按钮GA309240.860.8624PB45将线圈放入托盘2按压归零按钮A1414140.501.37(放下线圈)3移向COIL拿取一个GB1510100.361.7310GB15移动抓取一根线4将COIL 移向勾针后装入PB3019190.682.4115PB15拉出移线至勾针前5伸向漆包线抓住线的中上部GB1510100.362.77 握持线中部6握持线中上部60.222.996R6手指重抓住线尾并拉直7握持线头 150.543.5315GB15手指抓线中上部8握持线头60.223.746R6滑动重抓9伸向并按住COILGB1510150.544.2815PB15取线穿过COIL10手指按住线后施力压弯线,GB5GW2 990.324.60握持线尾11COIL旋120C1515150.545.1415C15握持线尾移动12按住COIL,踏气动开关F99150.545.6815PB15拉线至勾针上13握持并移动COIL8PB5801124.039.71112 16GB5至工作台下取线(重复16次)14按住COIL,踏气动开关16F91441605.76#160 16PB5拉线至勾针上(重复16次)15按住COIL同时旋转180C1515220.79#22GB5C15抓取线尾,旋18016抓住线尾并拉直GB5R613130.47#7GB5 抓取COIL17(空手)291.04#29GC15 移向线抓取2根18(空手)100.36#10PB5拉出2根线19(空手)70.25#7GB5抓取1根线20移向胸前抓取线中部GB1510150.54#15PB15拉出移线至勾针前21握持线中上部60.22#6R6手指重抓住线头并拉直22握持线头 150.54#15GB15手指抓线中上部23握持线头移动R6660.22#6R6手指滑动重抓24伸向并按住COILGB1510150.54#15PB15取线穿过COIL25抓取线放至右手GB5PB5 17170.61#7GB5同时抓取线2端的中部26移向并抓取COIL GB5770.25#握持2线端27手指重抓COIL及线R6670.25#7GB5抓取线另一端28调整COIL位置同时脚松开气动开关PC5F9219210.76#10PB5握持线尾移动29按住COIL,踏气动开关F99150.54#15PB15拉线移向勾针上30握持并移动COIL,同时脚松开气动开关8PB516F9801441445.18#112 16GB5至工作台下取线(重复16次)31按住COIL,踏气动开关16F91441605.76#160 16PB5拉线至勾针上(重复16次)32拿COIL 至胸前PA156100.36#10GB15抓取线圈33检查线圈是否合格E7770.25#握持线圈34手指抓线尾并拉直R6660.22#握持线圈Total TMU:962 Std MPP:=962/27.8*(1+10%)=38.06Remark:Operating Layout:1.直线压弯等于2KG的阻力;2.Total allowance is 10%.Video:00:00:00