SSPC标准索引.doc

SSPC StandardsSSPC-AB 1 - Mineral and Slag AbrasivesSSPC-AB 2 - Cleanliness of Recycled Ferrous Metallic AbrasivesSSPC-AB 3 - Newly Manufactured or Re-Manufactured Steel AbrasivesSSPC-CS 23.00(I) - Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of SteelSSPC-Guide 10 - Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content RequirementsSSPC-Guide 11 - Guide for Coating ConcreteSSPC-Guide 12 - Guide for Illumination of Industrial Painting ProjectsSSPC-Guide 13 - Guide for the Identification and Use of Industrial Coating Material in Computerized Product DatabasesSSPC-Guide 14 - Guide for the Repair of Imperfections in Galvanized or Inorganic Zinc Coated Steel Using Organic Zinc-Rich CoatingSSPC-Guide 6 - Guide for Containing Debris Generated During Paint Removal OperationsSSPC-Guide 7 - Guide for the Disposal of Lead-Contaminated Surface Preparation DebrisSSPC-Guide 9 - Guide for Atmospheric Testing of Coatings in the FieldSSPC-ME 1 - Uncontaminated Rusted SteelSSPC-PA 1 - Shop, Field, and Maintenance Painting of SteelSSPC-PA 2 - Measurement of Dry Coating Thickness With Magnetic GagesSSPC-PA COM - Commentary on Paint ApplicationSSPC-PA Guide 3 - A Guide to Safety in Paint ApplicationSSPC-PA Guide 4 - Guide to Maintenance Repainting with Oil Base or Alkyd Painting SystemsSSPC-PA Guide 5 - Guide to Maintenance Painting ProgramsSSPC-Paint 101 - Aluminum Alkyd Paint (Type I, Leafing and Type II, Non-Leafing)SSPC-Paint 102 - Black Alkyd PaintSSPC-Paint 103 - Black Phenolic PaintSSPC-Paint 104 - White or Tinted Alkyd PaintSSPC-Paint 106 - Black Vinyl PaintSSPC-Paint 108 - High-Build Thixotropic Leafing Aluminum PaintSSPC-Paint 11 - Red Iron Oxide, Zinc Chromate, Raw Linseed Oil, and Alkyd PrimerSSPC-Paint 12 - Cold-Applied Asphalt Mastic (Extra Thick Film)SSPC-Paint 15 - Steel Joist Shop PrimerSSPC-Paint 16 - Coal Tar Epoxy-Polyamide Black (or Dark Red) PaintSSPC-Paint 17 - Chlorinated Rubber Inhibitive PrimerSSPC-Paint 18 - Chlorinated Rubber Intermediate Coat PaintSSPC-Paint 19 - Chlorinated Rubber Topcoat PaintSSPC-Paint 20 - Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic)SSPC-Paint 21 - White or Colored Silicone Alkyd PaintSSPC-Paint 22 - Epoxy-Polyamide Paints (Primer, Intermediate, and Topcoat)SSPC-Paint 23 - Latex Primer for Steel SurfacesSSPC-Paint 24 - Latex Semi-gloss Exterior TopcoatSSPC-Paint 25 - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel, Type I and Type IISSPC-Paint 25.1BCS - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned SteelSSPC-Paint 26 - Slow Drying Linseed Oil Black Maintenance Primer, (Without Lead and Chromate Pigment)SSPC-Paint 27 - Basic Zinc Chromate-Vinyl Butyral Wash PrimerSSPC-Paint 28 - Water-Borne Epoxy Primer for Steel SurfacesSSPC-Paint 29 - Zinc Dust Sacrificial Primer, Performance-BasedSSPC-Paint 30 - Weld-Through Inorganic Zinc PrimerSSPC-Paint 31 - Single-Package Waterborne Alkyd Primer for Steel Surfaces, Performance-BasedSSPC-Paint 32 - Coal Tar Emulsion CoatingSSPC-Paint 33 - Coal Tar Mastic, Cold AppliedSSPC-Paint 34 - Water-Borne Epoxy Topcoat for Steel SurfacesSSPC-Paint 35 - Medium Oil Alkyd Primer (Air Dry/Low Bake), Type I and Type IISSPC-Paint 36 - Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-BasedSSPC-Paint 5 - Zinc Dust, Zinc Oxide, and Phenolic Varnish PaintSSPC-Paint 8 - Aluminum Vinyl PaintSSPC-Paint 9 - White (or Colored) Vinyl PaintSSPC-Paint COM - Commentary on Paint SpecificationsSSPC-PS 1.09 - Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)SSPC-PS 1.10 - Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)SSPC-PS 1.12 - Three-Coat Oil Base Zinc Chromate Painting SystemSSPC-PS 1.13 - One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments)SSPC-PS 10.01 - Hot-Applied Coal Tar Enamel Painting SystemSSPC-PS 10.02 - Cold-Applied Coal Tar Mastic Painting SystemSSPC-PS 11.01 - Black (or Dark Red) Coal Tar Epoxy Polyamide Painting SystemSSPC-PS 12.01 - One-Coat Zinc-Rich Painting SystemSSPC-PS 13.01 - Epoxy Polyamide Painting SystemSSPC-PS 14.01 - Steel Joist Shop Painting SystemSSPC-PS 15.01 - Chlorinated Rubber Painting System for Salt Water ImmersionSSPC-PS 15.02 - Chlorinated Rubber Painting System for Fresh Water ImmersionSSPC-PS 15.03 - Chlorinated Rubber Painting System for Marine and Industrial EnvironmentsSSPC-PS 15.04 - Chlorinated Rubber Painting System for Field Application Over a Shop-Applied Solvent Base Inorganic Zinc-Rich PrimerSSPC-PS 16.01 - Silicone Alkyd Painting System for New SteelSSPC-PS 18.01 - Three-Coat Latex Painting SystemSSPC-PS 24.00 - Latex Painting System for Industrial and Marine Atmospheres, Performance-BasedSSPC-PS 26.00 - Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use over Blast Cleaned Steel Type II, for Use over Hand Cleaned SteelSSPC-PS 27.00 - Alkyd Coating System Materials Specification, Performance-BasedSSPC-PS 4.02 - Four-Coat Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)SSPC-PS 4.04 - Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)SSPC-PS 9.01 - Cold-Applied Asphalt Mastic Painting System with Extra-Thick FilmSSPC-PS COM - Commentary on Painting SystemsSSPC-PS Guide 1.00 - Guide for Selecting Oil Base Painting SystemsSSPC-PS Guide 12.00 - Guide to Selecting Zinc-Rich Coating SystemsSSPC-PS Guide 15.00 - Guide for Selecting Chlorinated Rubber Painting SystemsSSPC-PS Guide 17.00 - Guide for Selecting Urethane Painting SystemsSSPC-PS Guide 19.00 - Guide for Selecting Painting Systems for Ship BottomsSSPC-PS Guide 2.00 - Guide for Selecting Alkyd Painting SystemsSSPC-PS Guide 20.00 - Guide for Selecting Painting Systems for Boot-toppingsSSPC-PS Guide 21.00 - Guide for Selecting Painting Systems for TopsidesSSPC-PS Guide 22.00 - Guide for Selecting One-Coat Preconstruction or Prefabrication Painting SystemsSSPC-PS Guide 3.00 - Guide for Selecting Phenolic Painting SystemsSSPC-PS Guide 4.00 - Guide for Selecting Vinyl Painting SystemsSSPC-PS Guide 7.00 - Guide for Selecting One-Coat Shop Painting SystemsSSPC-PS Guide 8.00 - Guide to Top-coating Zinc-Rich PrimersSSPC-QP 1 - Standard Procedure for Evaluating Painting Contractors (Field Application to Complex Industrial Structures)SSPC-QP 2 - Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures)SSPC-QP 3 - Standard Procedure for Evaluating Qualifications of Shop Painting ApplicatorsSSPC-QP 4 - Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair WorkSSPC-QP 5 - Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection CompaniesSSPC-QP COM - Commentary on Qualification ProceduresSSPC-SP 1 - Solvent CleaningSSPC-SP 10/NACE No. 2 - Near-White Blast CleaningSSPC-SP 11 - Power Tool Cleaning to Bare MetalSSPC-SP 12/NACE No. 5 - Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to RecoatingSSPC-SP 13/NACE No. 6 - Surface Preparation of ConcreteSSPC-SP 14/NACE No. 8 - Industrial Blast CleaningSSPC-SP 2 - Hand Tool CleaningSSPC-SP 3 - Power Tool CleaningSSPC-SP 5/NACE No. 1 - White Metal Blast CleaningSSPC-SP 6/NACE No. 3 - Commercial Blast CleaningSSPC-SP 7/NACE No. 4 - Brush-Off Blast CleaningSSPC-SP 8 - PicklingSSPC-SP COM - Surface Preparation Commentary for Steel and Concrete SubstratesSSPC-TR 1/NACE 6G194 - Thermal Pre-CleaningSSPC-TR 2/NACE 6G198 - Wet Abrasive Blast CleaningSSPC-TU 1 - Surface-Tolerant Coatings for SteelSSPC-TU 2/NACE 6G197 - Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary ContainmentSSPC-TU 3 - Over-coatingSSPC-TU 4 - Field Methods for Retrieval and Analysis of Soluble Salts on SubstratesSSPC-TU 5 - Accelerated Testing of Industrial Protective CoatingsSSPC-TU 6 - Chemical Stripping of Organic Coatings From Steel StructuresSSPC-TU 7 - Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance ActivitiesSSPC-VIS 1-89 - Visual Standard for Abrasive Blast Cleaned SteelSSPC-VIS 2 - Standard Method for Evaluating Degree of Rusting on Painted Steel SurfacesSSPC-VIS 3 - Visual Standard for Power- and Hand-Tool Cleaned SteelSSPC-VIS 4(I)/NACE No. 7 - Interim Guide and Visual Reference Photographs for Steel Cleaned by Water-jettingSSPC标准索引CHAPTER 1如何使用SSPC的标准、规范和指导CHAPTER 2表面处理标准、指导和规范SSPC-SP COM 钢结构和混凝土基材表面处理的注译Guide to SSPC-VIS 1 钢结构表面干喷砂处理指导和照片参考Guide to SSPC-VIS 2 已涂装油漆的钢结构表面生锈等级的评估标准方法Guide to SSPC-VIS 3 钢结构表面电动和手工喷砂处理的指导和照片参考Guide to SSPC-VIS 4/NACE VIS-7 钢结构表面水喷射处理的指导和照片参考Guide to SSPC-VIS 5/NACE VIS-9 钢结构表面湿喷砂处理指导和照片参考SSPC-SP1 溶剂清理SSPC-SP2 手工清理SSPC-SP3 机械清理SSPC-SP5/NACE No.1 白合金喷砂清理SSPC-SP 6/NACE No.3 大规模喷砂清理（3级金属表面喷砂清理）SSPC-SP7/NACE No.4 清扫级喷砂清理SSPC-SP8 酸洗SSPC-SP 10/NACE No.2 近喷砂除锈级清理SSPC-SP 11 裸露金属表面的机械清理SSPC-SP 12/NACE No.5 重涂之前金属表面水喷射处理和清洗SSPC-SP 13/NACE No.6 混凝土表面处理SSPC-SP 14/NACE No.8 工业化喷砂清理SSPC-SP 15 商业动力设备清理CHAPTER 3SSPC/NACE共同技术报告SSPC-TR 1/NACE 6G194 热处理SSPC-TR 2/NACE 6G198 湿喷砂SSPC-TR 3/NACE 6A192 钢结构罐体、管道和其他封闭环境在表面预处理、喷涂和固化保养过程中的除湿和温度控制SSPC-TR 4/NACE 80200 大气环境下工业漆预备规范SSPC-TR 5/ICRI 03741/NACE 02203 混凝土防腐配套体系的设计、实施和保养CHAPTER 4研磨剂规范SSPC-AB 1 矿石和矿渣磨料SSPC-AB 2 清洁的回收铁质磨料SSPC-AB 3 铁质磨料CHAPTER 5油漆和涂料体系的指导和规范SSPC-PS COM 油漆配套体系的注译SSPC-PS Guide 1.00 选用溶剂型油漆配套体系的指导SSPC-PS 1.09 三层溶剂型氧化锌油漆配套体系（无铅盐或铬盐颜料）SSPC-PS 1.10 四层溶剂型氧化锌油漆配套体系（无铅盐或铬盐颜料）SSPC-PS 1.13 单层溶剂型慢干保养漆配套（无铅盐或铬盐颜料）SSPC-PS Guide 2.00 选用醇酸类油漆配套体系的指导SSPC-PS Guide 4.00 选用乙烯基类油漆配套体系的指导SSPC-PS 4.02 四层乙烯基类油漆配套体系SSPC-PS 4.04 四层纯白或各色乙烯基类油漆配套体系（适用淡水、化工和腐蚀环境）SSPC-PS Guide 7.00 选用单层车间底漆配套的指导SSPC-PS Guide 8.00 单层富锌底漆配套体系指导SSPC-PS 9.01 超厚浆型室温施工沥青厚浆型油漆体系SSPC-PS 10.01 热喷涂煤焦沥青油漆配套体系SSPC-PS 10.02 室温喷涂煤焦沥青油漆配套体系SSPC-PS 11.01 黑色（或铁红色）环氧聚酰胺煤焦沥青油漆配套体系SSPC-PS Guide 12.00 富锌油漆配套体系的指导SSPC-PS 12.01 单层富锌油漆体系SSPC-PS 13.01 环氧聚酰胺油漆配套体系SSPC-PS 14.01 钢箱梁车间底漆配套体系SSPC-PS Guide 15.00 选用氯化橡胶油漆配套体系的指导SSPC-PS 15.01 氯化橡胶配套体系的耐盐水浸泡SSPC-PS 15.02 氯化橡胶配套体系的耐淡水浸泡SSPC-PS 15.03 海洋性和工业环境下的氯化橡胶配套体系SSPC-PS 15.04 现场涂装在溶剂型无机富锌底漆上的氯化橡胶配套体系SSPC-PS 16.01 新钢材上有机硅改性醇酸油漆配套体系SSPC-PS Guide 17.00 选择氨基甲酸酯油漆配套体系的指导SSPC-PS 18.01 三层乳胶漆配套体系SSPC-PS Guide 19.00 船底部位油漆配套体系的选用指导SSPC-PS Guide 20.00 水线部位油漆配套体系的选用指导SSPC-PS Guide 21.00 干舷部位油漆配套体系的选用指导SSPC-PS Guide 22.00 施工前或预涂装单层油漆的选用指导SSPC-PS 23.00/AWS C2.23M/NACE No.12 用于钢结构防腐的热喷铝、锌以及合金和混合物施工规范SSPC-PS 24.00 用于工业性和海洋性大气环境下高性能的乳胶漆配套体系SSPC-PS 26.00 高性能的环氧铝粉涂料配套体系的材料规范SSPC-PS 27.00 高性能的醇酸涂料配套体系材料规范CHAPTER 6油漆和涂料的标准和规范SSPC-Paint COM 油漆规范注译SSPC-Paint 8 乙烯基铝粉漆SSPC-Paint 9 纯白（或各色）乙烯基漆SSPC-Paint 15 钢箱梁车间底漆/金属结构底漆SSPC-Paint 16 黑（或铁红）色环氧聚酰胺煤焦沥青漆SSPC-Paint 17 氯化橡胶防锈底漆SSPC-Paint 18 氯化橡胶中间漆SSPC-Paint 19 氯化橡胶面漆SSPC-Paint 20 富锌漆（I有机型，II无机型）SSPC-Paint 21 纯白（或各色）有机硅改性醇酸漆SSPC-Paint 22 环氧聚酰胺漆（底漆、中间漆和面漆）SSPC-Paint 23 钢结构乳胶漆SSPC-Paint 24 半光外墙乳胶面漆SSPC-Paint 25 用于手工处理钢结构的氧化锌，醇酸，亚麻油底漆SSPC-Paint 25 BCS 用于喷砂处理钢结构的氧化锌，醇酸，亚麻油底漆SSPC-Paint 26 黑色慢干亚麻油保养底漆（无铅盐和铬盐颜料）SSPC-Paint 27 铬酸锌聚乙烯醇缩丁醛磷化底漆SSPC-Paint 28 钢结构水性环氧底漆SSPC-Paint 29 高性能锌粉阴级保护底漆SSPC-Paint 30 无机富锌可焊接底漆SSPC-Paint 31 单组分高性能型水性醇酸底漆SSPC-Paint 32 煤焦油乳胶漆SSPC-Paint 33 室温厚浆型煤焦油漆SSPC-Paint 34 钢结构水性环氧面漆SSPC-Paint 35 中油度醇酸底漆（气干/低温烘烤）SSPC-Paint 36 双组分高性能耐候脂肪族聚氨酯面漆SSPC-Paint 37 高性能用于胶结性材料上的水性环氧漆SSPC-Paint 38 高性能单组分湿固化耐候型脂肪族聚氨酯面漆SSPC-Paint 39 高性能快干或中等干燥双组分脂肪族聚氨酯面漆SSPC-Paint 101 铝粉醇酸漆SSPC-Paint 102 黑色醇酸漆SSPC-Paint 104白色或各色醇酸漆SSPC-Paint 106 黑色乙烯基漆SSPC-Paint 108 高触变厚浆型浮型铝粉漆CHAPTER 7油漆施工标准、指导、和规范SSPC-PA 1 钢结构车间底漆、现场涂装和维护SSPC-PA 2 用磁力仪测量干膜厚度SSPC-PA 3 Guide 3SSPC-PA 3 Guide 4 油性或醇酸漆维修复涂指导方针SSPC-PA 3 Guide 5 大气环境下钢结构维护涂装的指导方针SSPC-PA 6/NACE No. 10 室外碳钢储罐内涂使用玻璃纤维增强材料SSPC-PA 7 混凝土上使用薄型涂料SSPC-PA 8/NACE No.11 新造碳钢工艺结构上使用薄型有机内涂CHAPTER 8质量程序SSPC-QP COM 质量控制程序注译SSPC-QP 1 油漆施工方评估标准程序（现场复杂工业结构施工）SSPC-QP 2 油漆施工方相关资质的标准程序（现场从复杂结构中移除危险性涂料）SSPC-QP 3 车间底漆施工的质量评估的标准程序SSPC-QP 4 油漆施工方在清洗和维修的工作中防止油漆发生危险的评估标准程序SSPC-QP 5 检验部门评估油漆和内涂施工质量的标准程序SSPC-QP 6 对钢结构和混凝土结构进行防腐热喷涂施工质量的标准程序SSPC-QP 7评估有限工业工作经验的油漆施工方的程序SSPC-QP 8 评估小型资质公司在混凝土和其他胶结性材料涂装的油漆和铺面的标准程序SSPC-QS 1 评估施工方高质量管理系统的标准程序CHAPTER 9技术指导SSPC-Guide 6 在脱漆操作过程中保留部分旧漆膜的指导方针SSPC- Guide 7 表面处理中处置受铅污染漆膜的指导方针SSPC- Guide 9 现场涂装时环境测试的指导方针SSPC- Guide 10 对指定使用油漆测试有机挥发份（VOC）的指导方针SSPC- Guide 12 阐明工程使用工业漆的的指导方针SSPC- Guide 13 通过自动化产品库确认和使用工业漆的指导方针SSPC- Guide 14 使用有机富锌油漆对已经涂覆电镀锌、有机富锌或无机富锌的钢表面缺陷进行修补的直到方针SSPC- Guide 16 指定和选择铁锈收集器的指导方针SSPC- Guide 17 为工业漆和油漆施工方开发社会安全程序的指导方针CHAPTER 10技术更新SSPC- TU 1 使用在钢结构上的表面容忍涂料SSPC- TU 2/NACE 6G197 使用在混凝土上二次防护的油漆体系的设计、施工和维护SSPC- TU 3 罩光涂层SSPC- TU 4 现场分析和去除材质表面可溶性盐的方法SSPC- TU 5 工业防护漆的加速测试法SSPC- TU 6 从钢结构表面化学剥落的有机涂层SSPC- TU 7在表面预处理和油漆搅拌的过程中对周围空气、土壤和水的取样SSPC- TU 8使用含有异氰酸根的油漆，例如工业保养漆SSPC- TU 9 评估工程中使用防腐涂料的成本SSPC- TU 10在混凝土基座上使用厚膜型涂料和铺面CHAPTER 11测试样板的预备方法SSPC- ME 1未污染的生锈钢铁附录 附录 A 参考标准和规范 附录 B 参考组织 附录 C 废弃规范2005版的补充SSPC- Guide 15 现场对钢结构和其他无孔材质表面分析和去除可溶性盐的方法当梅花的幽香随冬天的到来而传出，那么半空中漂泊的雪花，也会依偎这香气，随之飘舞。当万物凋零，充斥于世界的凄凉席卷而来时，在一个角落里梅花却悄然盛放了，它似乎在告诉世人，它只是缺少一个盛放的机会。其实，世上最温暖的语言，“ 不是我爱你，而是在一起。” 所以懂得才是最美的相遇！只有彼此以诚相待，彼此尊重，相互包容，相互懂得，才能走的更远。相遇是缘，相守是爱。缘是多么的妙不可言，而懂得又是多么的难能可贵。否则就会错过一时，错过一世！择一人深爱，陪一人到老。一路相扶相持，一路心手相牵，一路笑对风雨。在平凡的世界，不求爱的轰轰烈烈；不求誓言多么美丽；唯愿简单的相处，真心地付出，平淡地相守，才不负最美的人生；不负善良的自己。人海茫茫，不求人人都能刻骨铭心，但求对人对己问心无愧，无怨无悔足矣。大千世界，与万千人中遇见，只是相识的开始，只有彼此真心付出，以心交心，以情换情，相知相惜，才能相伴美好的一生，一路同行。然而，生活不仅是诗和远方，更要面对现实。如果曾经的拥有，不能天长地久，那么就要学会华丽地转身，学会忘记。忘记该忘记的人，忘记该忘记的事儿，忘记苦乐年华的悲喜交集。人有悲欢离合，月有阴晴圆缺。对于离开的人，不必折磨自己脆弱的生命，虚度了美好的朝夕；不必让心灵痛苦不堪，弄丢了快乐的自己。擦汗眼泪，告诉自己，日子还得继续，谁都不是谁的唯一，相信最美的风景一直在路上。人生，就是一场修行。你路过我，我忘记你；你有情，他无意。谁都希望在正确的时间遇见对的人，然而事与愿违时，你越渴望的东西，也许越是无情无义地弃你而去。所以美好的愿望，就会像