CATIA汽车管路.ppt

Tubing Design管路管路设计CATIA Training FoilsVersion 5 Release 1320041.Course Presentation课程介程介绍Objectives of the course目目标In this course you will learn how the CATIA Tubing Design product is used to quickly and efficiently create an intelligent tubing layout.智能化管路智能化管路设计Targeted audienceExperienced CATIA V5 users目目标学学员有使用有使用经验的的CATIA用用户PrerequisitesCATIA V5 Fundamentals予要求：予要求：CATIA V5基基础0.5 day2.Table of Contents目目录1.Introduction to Tubing Design Fundamentalsp.4Accessing the workbench模模块介介绍p.5User Interface:Tubing Design Icons界面介界面介绍p.62.Creating Line IDs生成管生成管线ID码p.93.Routing a Run生成管生成管线p.104.Modifying a Run修改管修改管线p.145.Implementing Turn Rules管路拐弯管路拐弯p.196.Placing Parts on a Run管路定管路定义功能功能p.227.Generating Reports生成管路拐点坐生成管路拐点坐标p.243.Accessing the workbench进入模入模块To access the Tubing Design Workbench 进入模入模块1.Select the Start Menu3.Click on Tubing Design2.Select Equipment&SystemsTubing Design Workbench icon选择Start菜单选择设备和系统方案选择管路设计模块图标4.User Interface:Tubing Design Icons(1/2)Line ID:Select/Query,Create,Transfer,Rename,Delete,Merge,Import管路管路ID码编辑Route a Run生成管路生成管路Update Part,Flip Part Position,Edit Part Parameters刷新功能、参数刷新功能、参数Place Tubing Part插入接插入接头Offset Route,Route from Spline,Route thru a pathway偏距管路等偏距管路等Connect/Disconnect Part/Run,Create an offset segment con.连接Manage grafic representation几何几何显示示Manage flows流量管理流量管理Create weld assembly管路管路焊接接Build Tubing Part新建功能新建功能Align Side,Align Center,Rotate to Align,Distribute,Align two Planes移移动Rename ID重新命名重新命名ID Snap,Snap three points,Snap center of polygon,snap Surface捕捉捕捉5.User Interface:Tubing Design Icons(2/2)AxisGridStepSnap:To current Axis当前坐当前坐标轴To last Position最后位置最后位置To XY Plane XY面面To all Plane所有平面所有平面To Elevation Plane抬高平面抬高平面To Drafting Elements平面元素平面元素Snap Tool Options捕捉工具捕捉工具Offset PlanesAdvanced Offset PlanesToggle Dimming ModeToggle Analysis Mode坐标轴网格距离生成平面显示模式6.Routing a Run(1/4)生成管路生成管路Place Offset Plane生成起始面Select the Offset Plane Icon选择图标Offset Planes can be placed at anytime during the creation of Runs.此图标可以在生成管路时随时使用Offset Plane图标7.Routing a Run(2/4)生成管路生成管路 Select the Line ID选择管管线ID码Depending on what Line ID is choosen,CATIA lets you select a predefined Turn Radius.In this case is just one Turn Radius for the 3/8in diameter defined,which means that you wont get a selection panel.根据根据选择的的管管线ID码，可以，可以选择拐弯半径拐弯半径8.Routing a Run(3/4)生成管路生成管路Click when the green arrow pops up.Stop when the value reaches 2in.Point-To-Point-Mode Create the Run生成管路生成管路Make sure that the Grid Step is set to 0.5 in.确确认步步长为0.5inRoute a Run图标当绿箭头出现时点击鼠标当到达一定长度时停9.Routing a Run(4/4)生成管路生成管路Create a Run from Point-To-Point点到点方式生成管路点到点方式生成管路Click the the next two connectors.The Run will be created.点点击两个支座，生成管路两个支座，生成管路10.Modifying a Run(1/5)修改管路修改管路 Modify the Run修改管路修改管路A new Run shall be created and afterwards being modified.先生成后修改先生成后修改Therefore you create a new Run using the orthogonal mode as shown in the picture.使用使用对角角线方式生成管路方式生成管路After that you will modify the Run.然后修改然后修改Route a RunOrthogonalCreate the Run生成管路对角线方式产生管路11.Modifying a Run(2/5)修改管路修改管路Manipulation Handles Modify the Run修改管路修改管路Runs can be edited by right clicking and choosing Runxxx.object Definition in the contextual menu.You will see the skeleton of the Run,that consists of Segments,Nodes and Manipulation Handles.在管路上右在管路上右击鼠鼠标选择Definition菜菜单，将，将显示管路骨示管路骨架，包括分段、架，包括分段、节点和操点和操纵柄柄Segments can be stretched by dragging the green vertexes at the end of each segment.其中的分段可以通其中的分段可以通过鼠鼠标拖拉端点而改拖拉端点而改变长度度SegmentNodeAlignment of the Run操纵柄节点分段管路导向12.Modifying a Run(3/5)修改管路修改管路 Modify the Run修改管路修改管路Segments and Nodes can also be modified when the Run is in definition mode.You can modify Segments and Nodes by right clicking them.也可以在上下文菜也可以在上下文菜单中中选择定定义来修改分段和来修改分段和节点点Right click on segmentRight click on run13.Modifying a Run(4/5)修改管路修改管路 Modifying the Run修改管路修改管路Runs can also be modified by dragging the Planes at the end of each segment.The alignment of the planes depends on the alignment of the Compass!These Planes and the basic Plane of the Compass are always parallel!也可以通也可以通过拖拉分段两端的平面改拖拉分段两端的平面改变管，此平面的朝向和管，此平面的朝向和罗盘的基准平面一致的基准平面一致During the modification of Runs the Offset Plane can be used to allow an exact placement.修改中可以使用等修改中可以使用等间距平面距平面图标Offset PlaneDistance to Offset plane等间距平面命令间距14.Modifying a Run(5/5)修改管路修改管路 Transfering a Line ID转换管路管路ID码Before you start creating a Run you must select the proper Line ID.Its possible to change the Line ID afterwards by using the Transfer Line ID function.先先选择ID码再生成再生成Select the Run,which Line ID has to be changed and the Transfer Line ID Icon.In the appearing dialog box you can select the new Line ID.管路生成后用管路生成后用转换图标改管特性改管特性The appearing information dialog close with OK.确定确定Selected RunSelect the new Line ID here.Click OK to put it onto the Run.Transfer Line ID选择管路转换码图标选择新的ID码确定15.Implementing Turn Rules(1/3)拐弯拐弯Design Table button activates the Rules options.Implement Turn Rules设置拐弯半径置拐弯半径You can adjust the Bend Radius for the Run using Rules from Design Rules catalog when starting the creation of a new Run.修改拐弯修改拐弯规则When you are using a Line ID for the first time,the Design Table for the available Turn Rules appears automatically.Later you must click on the Design Table Button to access the Rules.生成管路生成管路对话框中使用拐弯框中使用拐弯规则，选择不同半径不同半径Available Bends for the selected Line ID.拐弯规则可选择的半径16.Implementing Turning Rules(2/3)拐弯拐弯 Modify Turn Rules修改修改规则You can modify the Turn Rule of a Run by right clicking it and then enter the Definition Dialog.右右键上下文菜上下文菜单选择DefinitionThere you can enter a new Radius which effects the whole Run.输入半径，影响整个入半径，影响整个管路管路Definition dialogEnter the new Radius here.The new radius will effect all bends in the Run.定义对话框输入新半径整个管路的弯受影响17.Implementing Turning Rules(3/3)拐弯拐弯Radius is now 0,5”(only for this bend).BEFOREAFTER Override Turning Rules超越超越规则To apply a certain bend radius to one bend of the Run you must enter the Definition Dialog of the corresponding Node.修改修改单个弯需要使用个弯需要使用节点的上下文定点的上下文定义菜菜单Therefore enter the definition of the Run(right click Runxxx.object Definition)and then the definition of the node(right click the node Definition).两次上下文菜两次上下文菜单In the appearing Node Definition you can enter a Bend Radius that only effects the selected Bend.Node Definiton DialogEnter the new radius here.Enter the definiton dialog of the node.如图所示节点定义对话框输入新半径值18.Placing Parts on a Run(1/2)插入接插入接头 Place Parts on a RunSelect the Place Tubing Part Icon.选择图标 Check,that spec driven is turned off.关关闭spec driven按按钮The Place Tubing Part Dialog appears.Click on the Browse Button(“”).选择浏览A class browser appears that lets you select a function.窗口中窗口中选择功能功能Place Tubing PartBrowse图标浏览19.Placing Parts on a Run(2/2)插入接插入接头BEFOREAFTER Place Parts on a Run插入接插入接头For the selected function you must specify a Part Type.对于于选择的功能，的功能，选择一个一个类型型Click on the Run where you want to place the Part.At the end of Runs or Tubing parts a green vertex appears to show you,there is a connector.You can also use this connetors for placement.选择管路，出管路，出现一个一个绿色色节点点If there are multiple parts aviable for the selected Part Type,then a Part Selection dialog box will be displayed.You may then select the appropriate part for your design.在在Part Number中如果有多种，可以中如果有多种，可以选择适合的适合的20.Generating Reports(1/2)生成弯管文件生成弯管文件 Select a macro for the report宏命令宏命令Select the Tubing LineID that shall be included in the report.选择管路管路Select the Tools Macro Macros function from the menu.菜菜单Tools-Macro-MacroSelect the PslTubingExtract.CATScript macro.选择宏命令文件，并运行宏命令文件，并运行21.Generating Reports(2/2)The Report will be generated.产生弯管文件生弯管文件22.