大学高数公式终极整理.doc

专业整理2013 高等数学公式高等数学公式导数公式：基本积分表：三角函数的有理式积分：一些初等函数： 两个重要极限：三角函数公式：诱导公式： 函数角Asincostgctg-sincos-tg-ctg90-cossinctgtg90+cos-sin-ctg-tg180-sin-cos-tg-ctg180+-sin-costgctg270-cos-sinctgtg270+-cossin-ctg-tg360-sincos-tg-ctg360+sincostgctg和差角公式： 和差化积公式：倍角公式：半角公式：正弦定理： 余弦定理： 反三角函数性质：高阶导数公式莱布尼兹（Leibniz）公式：中值定理与导数应用：曲率：定积分的近似计算：定积分应用相关公式：空间解析几何和向量代数：多元函数微分法及应用微分法在几何上的应用：方向导数与梯度：多元函数的极值及其求法：重积分及其应用：柱面坐标和球面坐标：曲线积分：曲面积分：高斯公式：斯托克斯公式曲线积分与曲面积分的关系：常数项级数：级数审敛法：绝对收敛与条件收敛：幂级数：函数展开成幂级数：一些函数展开成幂级数：欧拉公式：三角级数：傅立叶级数：周期为的周期函数的傅立叶级数：微分方程的相关概念：一阶线性微分方程：全微分方程：二阶微分方程：二阶常系数齐次线性微分方程及其解法：(*)式的通解两个不相等实根两个相等实根一对共轭复根二阶常系数非齐次线性微分方程世界观人人都有，而哲学只有经过系统的学习的人才能掌握它。世界观是自发成的，是不系统的、不自觉的、缺乏严密的逻辑和理论论证，而哲学则是把自发的、零散的、朴素的世界观加以理论化和系统化，因而具有严密的逻辑和完整的理论体系。appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 11 / 12