盾构机每月检查(机械保环).doc

Erector拼装机S/N序号Check Points 检查项目Remarks 备注1Gear oil sample for analysis齿轮油样进行分析Screw conveyor螺旋输送机S/N序号Check Points 检查项目Remarks 备注1Pressure check for pressure accumulator检查压力累加器2Gear oil sample for analysis齿轮油样进行分析Belt conveyor皮带输送机S/N序号Check Points 检查项目Remarks 备注1Check tightness of bolt connections检查螺栓连接的密封性Power unit carriage动力台车S/N序号Check Points 检查项目Remarks 备注1Check whether the abnormal wear of the wheel检查轮子的磨损有否异常Hydraulic system液压系统S/N序号Check Points 检查项目Remarks 备注1Any contamination of working fluid?液压油是否已被污染Check by the manufacturer every 6 months.半年请厂家进行一次检测2Check the accumulator pressure检查蓄能器压力是否正常Lubrication system润滑系统S/N序号Check Points 检查项目Remarks 备注1Any impurities in the grease sealed portions?润滑脂封入部位有无异物2Any impurities in gear oil?齿轮油中是否有异物Air System工业空气系统S/N序号Check Points 检查项目Remarks 备注1Check the fuel filter,replace if required检查燃油滤清器，如果需要更换2Check valves,reseal and leaking valves检查阀门的密封和泄漏3Clean the Air cleaner and cooler.清洁空气滤清器和冷却器。4Replace the strainer if required如果需要更换滤网5Check air pressure检查空气压力6Any abnormal noise是否有不正常的声音7Check the air leakage if any检查是否有空气泄漏