c语言字符串操作大全.doc

不错函数名: stpcpy 功 能: 拷贝一个字符串到另一个 用 法: char *stpcpy(char *destin, char *source); 程序例: #include #include int main(void) char string10; char *str1 = abcdefghi; stpcpy(string, str1); printf(%sn, string); return 0; 函数名: strcat 功 能: 字符串拼接函数 用 法: char *strcat(char *destin, char *source); 程序例: #include #include int main(void) char destination25; char *blank = , *c = C+, *Borland = Borland; strcpy(destination, Borland); strcat(destination, blank); strcat(destination, c); printf(%sn, destination); return 0; 函数名: strchr 功 能: 在一个串中查找给定字符的第一个匹配之处 用 法: char *strchr(char *str, char c); 程序例: #include #include int main(void) char string15; char *ptr, c = r; strcpy(string, This is a string); ptr = strchr(string, c); if (ptr) printf(The character %c is at position: %dn, c, ptr-string); else printf(The character was not foundn); return 0; 函数名: strcmp 功 能: 串比较 用 法: int strcmp(char *str1, char *str2); 看Asic码，str1str2，返回值 0；两串相等，返回0程序例: #include #include int main(void) char *buf1 = aaa, *buf2 = bbb, *buf3 = ccc; int ptr; ptr = strcmp(buf2, buf1); if (ptr 0) printf(buffer 2 is greater than buffer 1n); else printf(buffer 2 is less than buffer 1n); ptr = strcmp(buf2, buf3); if (ptr 0) printf(buffer 2 is greater than buffer 3n); else printf(buffer 2 is less than buffer 3n); return 0; 函数名: strncmpi 功 能: 将一个串中的一部分与另一个串比较, 不管大小写 用 法: int strncmpi(char *str1, char *str2, unsigned maxlen); 程序例: #include #include int main(void) char *buf1 = BBB, *buf2 = bbb; int ptr; ptr = strcmpi(buf2, buf1); if (ptr 0) printf(buffer 2 is greater than buffer 1n); if (ptr 0) printf(buffer 2 is less than buffer 1n); if (ptr = 0) printf(buffer 2 equals buffer 1n); return 0; 函数名: strcpy 功 能: 串拷贝 用 法: char *strcpy(char *str1, char *str2); 程序例: #include #include int main(void) char string10; char *str1 = abcdefghi; strcpy(string, str1); printf(%sn, string); return 0; 函数名: strcspn 功 能: 在串中查找第一个给定字符集内容的段 用 法: int strcspn(char *str1, char *str2); 程序例: #include #include #include int main(void) char *string1 = 1234567890; char *string2 = 747DC8; int length; length = strcspn(string1, string2); printf(Character where strings intersect is at position %dn, length); return 0; 函数名: strdup 功 能: 将串拷贝到新建的位置处 用 法: char *strdup(char *str); 程序例: #include #include #include int main(void) char *dup_str, *string = abcde; dup_str = strdup(string); printf(%sn, dup_str); free(dup_str); return 0; 函数名: stricmp 功 能: 以大小写不敏感方式比较两个串 用 法: int stricmp(char *str1, char *str2); 程序例: #include #include int main(void) char *buf1 = BBB, *buf2 = bbb; int ptr; ptr = stricmp(buf2, buf1); if (ptr 0) printf(buffer 2 is greater than buffer 1n); if (ptr 0) printf(buffer 2 is less than buffer 1n); if (ptr = 0) printf(buffer 2 equals buffer 1n); return 0; 函数名: strerror 功 能: 返回指向错误信息字符串的指针 用 法: char *strerror(int errnum); 程序例: #include #include int main(void) char *buffer; buffer = strerror(errno); printf(Error: %sn, buffer); return 0; 函数名: strcmpi 功 能: 将一个串与另一个比较, 不管大小写 用 法: int strcmpi(char *str1, char *str2); 程序例: #include #include int main(void) char *buf1 = BBB, *buf2 = bbb; int ptr; ptr = strcmpi(buf2, buf1); if (ptr 0) printf(buffer 2 is greater than buffer 1n); if (ptr 0) printf(buffer 2 is less than buffer 1n); if (ptr = 0) printf(buffer 2 equals buffer 1n); return 0; 函数名: strncmp 功 能: 串比较 用 法: int strncmp(char *str1, char *str2, int maxlen); 程序例: #include #include int main(void) char *buf1 = aaabbb, *buf2 = bbbccc, *buf3 = ccc; int ptr; ptr = strncmp(buf2,buf1,3); if (ptr 0) printf(buffer 2 is greater than buffer 1n); else printf(buffer 2 is less than buffer 1n); ptr = strncmp(buf2,buf3,3); if (ptr 0) printf(buffer 2 is greater than buffer 3n); else printf(buffer 2 is less than buffer 3n); return(0); 函数名: strncmpi 功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写 用 法: int strncmpi(char *str1, char *str2); 程序例: #include #include int main(void) char *buf1 = BBBccc, *buf2 = bbbccc; int ptr; ptr = strncmpi(buf2,buf1,3); if (ptr 0) printf(buffer 2 is greater than buffer 1n); if (ptr 0) printf(buffer 2 is less than buffer 1n); if (ptr = 0) printf(buffer 2 equals buffer 1n); return 0; 函数名: strncpy 功 能: 串拷贝 用 法: char *strncpy(char *destin, char *source, int maxlen); 程序例: #include #include int main(void) char string10; char *str1 = abcdefghi; strncpy(string, str1, 3); string3 = 0; printf(%sn, string); return 0; 函数名: strnicmp 功 能: 不注重大小写地比较两个串 用 法: int strnicmp(char *str1, char *str2, unsigned maxlen); 程序例: #include #include int main(void) char *buf1 = BBBccc, *buf2 = bbbccc; int ptr; ptr = strnicmp(buf2, buf1, 3); if (ptr 0) printf(buffer 2 is greater than buffer 1n); if (ptr 0) printf(buffer 2 is less than buffer 1n); if (ptr = 0) printf(buffer 2 equals buffer 1n); return 0; 函数名: strnset 功 能: 将一个串中的所有字符都设为指定字符 用 法: char *strnset(char *str, char ch, unsigned n); 程序例: #include #include int main(void) char *string = abcdefghijklmnopqrstuvwxyz; char letter = x; printf(string before strnset: %sn, string); strnset(string, letter, 13); printf(string after strnset: %sn, string); return 0; 函数名: strpbrk 功 能: 在串中查找给定字符集中的字符 用 法: char *strpbrk(char *str1, char *str2); 程序例: #include #include int main(void) char *string1 = abcdefghijklmnopqrstuvwxyz; char *string2 = onm; char *ptr; ptr = strpbrk(string1, string2); if (ptr) printf(strpbrk found first character: %cn, *ptr); else printf(strpbrk didnt find character in setn); return 0; 函数名: strrchr 功 能: 在串中查找指定字符的最后一个出现 用 法: char *strrchr(char *str, char c); 程序例: #include #include int main(void) char string15; char *ptr, c = r; strcpy(string, This is a string); ptr = strrchr(string, c); if (ptr) printf(The character %c is at position: %dn, c, ptr-string); else printf(The character was not foundn); return 0; 函数名: strrev 功 能: 串倒转 用 法: char *strrev(char *str); 程序例: #include #include int main(void) char *forward = string; printf(Before strrev(): %sn, forward); strrev(forward); printf(After strrev(): %sn, forward); return 0; 函数名: strset 功 能: 将一个串中的所有字符都设为指定字符 用 法: char *strset(char *str, char c); 程序例: #include #include int main(void) char string10 = 123456789; char symbol = c; printf(Before strset(): %sn, string); strset(string, symbol); printf(After strset(): %sn, string); return 0; 函数名: strspn 功 能: 在串中查找指定字符集的子集的第一次出现 用 法: int strspn(char *str1, char *str2); 程序例: #include #include #include int main(void) char *string1 = 1234567890; char *string2 = 123DC8; int length; length = strspn(string1, string2); printf(Character where strings differ is at position %dn, length); return 0; 函数名: strstr 功 能: 在串中查找指定字符串的第一次出现 用 法: char *strstr(char *str1, char *str2); 程序例: #include #include int main(void) char *str1 = Borland International, *str2 = nation, *ptr; ptr = strstr(str1, str2); printf(The substring is: %sn, ptr); return 0; 函数名: strtod 功 能: 将字符串转换为double型值 用 法: double strtod(char *str, char *endptr); 程序例: #include #include int main(void) char input80, *endptr; double value; printf(Enter a floating point number:); gets(input); value = strtod(input, &endptr); printf(The string is %s the number is %lfn, input, value); return 0; 函数名: strtok 功 能: 查找由在第二个串中指定的分界符分隔开的单词 用 法: char *strtok(char *str1, char *str2); 程序例: #include #include int main(void) char input16 = abc,d; char *p; /* strtok places a NULL terminator in front of the token, if found */ p = strtok(input, ,); if (p) printf(%sn, p); /* A second call to strtok using a NULL as the first parameter returns a pointer to the character following the token */ p = strtok(NULL, ,); if (p) printf(%sn, p); return 0; 函数名: strtol 功 能: 将串转换为长整数 用 法: long strtol(char *str, char *endptr, int base); 程序例: #include #include int main(void) char *string = 87654321, *endptr; long lnumber; /* strtol converts string to long integer */ lnumber = strtol(string, &endptr, 10); printf(string = %s long = %ldn, string, lnumber); return 0; 函数名: strupr 功 能: 将串中的小写字母转换为大写字母 用 法: char *strupr(char *str); 程序例: #include #include int main(void) char *string = abcdefghijklmnopqrstuvwxyz, *ptr; /* converts string to upper case characters */ ptr = strupr(string); printf(%sn, ptr); return 0; 函数名: swab 功 能: 交换字节 用 法: void swab (char *from, char *to, int nbytes); 程序例: #include #include #include char source15 = rFna koBlrna d; char target15; int main(void) swab(source, target, strlen(source); printf(This is target: %sn, target); return 0;