©2010-2026 宁波自信网络信息技术有限公司 版权所有
客服电话：0574-28810668 投诉电话：18658249818
浙ICP备2021020529号-1 | 浙B2-20240490
关注我们 ：
1、Windows下Subversion和TortoiseSVN构建SVN版本控制 2009-06-05 来源：网络 1.下载Subversion的window安装版本svn-1.4.6-setup.exe http://subversion.tigris.org/ http://subversion.tigris.org/servlets/ProjectDocumentList?folderID=8100 2.下载TortoiseSVN的TortoiseSVN-1.5.2.13595-win32-svn-1.5.1.msi版本 3.安装subversion 双击
2、svn-1.4.6-setup.exe，一路next完成安装。 设置环境变量，将subversion对bin设置到path中。如：D:Program FilesSubversionbin 4.安装TortoiseSVN 双击TortoiseSVN-1.5.2.13595-win32-svn-1.5.1.msi，一路next完成安装。 5.创建svn容器Repository 在硬盘上任意位置创建一文件夹，如D:svnRepository，在文件夹上右键 TortoiseSVN->Create repository here 创建成功后将在D:svnRepository下生成一系列文
3、件。 6.配置容器的访问权限 在容器的目录下D:svnRepository的conf中，用记事本打开svnserve.conf文件，找到 # anon-access = read # auth-access = write # password-db = passwd 并去掉注释# 注意，去掉注释后，不要留下空格，保持每行顶格，切记！！！ 效果如下： ### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this reposi
4、tory. (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.tigris.org/ for more information. [general] ### These options control access to the repository for unauthenticated ### and authenticated users. Valid values are "
5、write", "read", ### and "none". The sample settings below are the defaults. anon-access = read auth-access = write ### The password-db option controls the location of the password ### database file. Unless you specify a path starting with a /, ### the file's location is relative to the directo
6、ry containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. password-db = passwd ### The authz-db option controls the location of the authorization ### rules for path-based access cont
7、rol. Unless you specify a path ### starting with a /, the file's location is relative to the the ### directory containing this file. If you don't specify an ### authz-db, no path-based access control is done. ### Uncomment the line below to use the default authorization file. # authz-db = authz
8、 ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa. The default realm ### is repository's uuid. # realm = My First Repository [sasl] ### This option
9、specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run 'svnserve --version' and look for a line ### reading 'Cyrus SASL authentication is available.'
10、 use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated ### to the effective key length for encryption (e.g. 128 means 128-bit ### en
11、cryption). The values below are the defaults. # min-encryption = 0 # max-encryption = 256 配置访问用户列表，用户名加密码 记事本打开该目录下的文件passwd 去掉 # harry = harryssecret # sally = sallyssecret 的注释#，同意注意每行要顶格，开头也不能有空格。 说明harry = harryssecret表示：用户名=密码 当然也可以自己增加，如gary=gary 最好效果如下： ### This file is an example
12、password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] harry=harryssecret sally=sallyssecret gary=gary 7.启动Subver
13、sion 因为之前设置了环境变量path= D:Program FilesSubversionbin；因此打开cmd，直接运行命令：svnserve -d -r D:svnRepository 这样Subversion服务器就假设好了。 8.向容器添加需版本控制的文件（也可以远程，只需url为ip就行） 在硬盘上任意位置，右键需要上传的文件的上级文件夹，TortoiseSVN->Import… 此处为了测试，创建文件夹D:importFiles，里面放一doc文件test.doc，即要将test.doc上传到svn中去。右键importFiles，TortoiseSVN->Impor
14、t…，输入容器的url： svn://localhost/svnRepository 输入用户名和密码： 就将test.doc文件上传到svn容器了 9.从容器获得test.doc文件（也可以远程，只需url为ip就行） 在任意位置，某文件上右键D:checkOutFiles，点击SVN Checkout… 输入url即可 10.完成 这样就完成的部署和存取，修改相应的文件，提交即可，注意始终保持Subversion的运行。 注意，在第8步中会报错“期望文件系统格式“2”；发现格式“3”” 原因是TortoisSVN的版本过高，或与Subversion不匹配。 应该换成低
15、版本的TortoisSVN 用TortoiseSVN-1.4.8.12137-win32-svn-1.4.6.msi 即应该为svn-1.4.6-setup.exe和TortoiseSVN-1.4.8.12137-win32-svn-1.4.6.msi的组合才行，步骤和之前的一样，只是在第6步中的svnserve.conf文件中没有后面的内容 [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false.
16、 This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run 'svnserve --version' and look for a line ### reading 'Cyrus SASL authentication is available.' # use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated ### to the effective key length for encryption (e.g. 128 means 128-bit ### encryption). The values below are the defaults. # min-encryption = 0 # max-encryption = 256
©2010-2026 宁波自信网络信息技术有限公司 版权所有
客服电话：0574-28810668 投诉电话：18658249818
浙ICP备2021020529号-1 | 浙B2-20240490
关注我们 ：
