棉抗菌剂,布抗菌剂,面料用抗菌剂,针织品抗菌剂,针织布抗菌剂,袜子抗菌剂,抗菌剂,无纺布抗菌剂.doc

产品用途0
抗菌防臭整理剂TPM9007适用于处理直接与皮肤接触的含涤纶和锦纶纤维的纺织品。例如：运动装、工作服、内衣裤、袜子、鞋衬里、毛巾织物、地毯、羊皮革、过滤材料、装饰用布、家纺产品、军队用纺织品等。
抗菌防臭整理剂TPM9007是一种非溶出型持久抗菌整理剂。TPM 9007具有良好的安全性，它可以高效完全去除织物上的细菌、真菌和霉菌，保持织物清洁，并能防止细菌再生和繁殖。TPM9007在高温时上染涤纶和锦纶纤维内部，TPM9007被固定于纤维内部且受到纤维的保护,故具有耐洗性和可靠的广谱抗菌效果。其抗菌原理是它破坏细菌的细胞壁，由于胞内渗透压是胞外渗透压的20~30倍，因此细胞膜破裂，胞浆物外泄，这样也就终止了微生物的代谢过程，使微生物无法生长和繁殖。
SGS、Intertek等多家权威检测机构一致证明: 用TPM9007整理的织物具有很高的抗菌、防臭作用；防止霉变；持久耐洗涤；无毒，对皮肤无刺激，不含甲醛和重金属离子等有害物质，符合环保要求；对预防脚癣、湿疹、汗臭、脚臭、皮肤骚痒有显著效果。TPM9007符合美国AATCC100标准及日本JIS L 1902-2002标准。抗菌防臭整理剂TPM9007整理后的织物对革兰氏阳性菌、革兰氏阴性菌、霉菌和酵母菌具有广谱抗菌活性。
这些有害微生物举例如下：
革兰氏阳性菌 革兰氏阴性菌 霉菌和酵母菌
MRSA 大肠杆菌 白色念珠菌
枯草杆菌 肺炎杆菌 絮状表皮癣菌
金黄色葡萄球菌 绿脓杆菌 黑曲霉菌

基本性状
组 分 有机抗菌剂
外 观 无色至淡黄色清澈液体
PH 值 5.5~7.0
闪 点 ﹥100℃
密度（20℃） 1.06~1.08g/cm3
粘度(20℃) ＜250 mpa·s
离子性 非离子
溶解性 易分散于水（30～40℃）
相容性 与阴离子、阳离子、非离子产品有良好的相容稳定性，在实际大生产前须根据具体的配方进行试验
牢 度 优异的耐洗牢度及干洗、熨烫和汗渍牢度
毒性/环保 无毒、对人体安全。不含酚类和重金属化合物； 本产品的贮藏、操作和使用应遵守化学品贮运的一般卫生安全规定，不得吞服
皮肤刺激性 10%水溶液对皮肤无刺激性，商品原液对眼睛有刺激（戴护目镜）

特 性 优 点
1．具有高效耐久的抗菌性 低浓度时即具有优秀的抗菌效果、健康舒适
2．广谱型的抗菌活性 对革兰氏阴性、革兰氏阳性细菌、真菌、霉菌均具有优异的抗菌作用
3．优良的耐洗性 TPM9007被固定于纤维内部且受到纤维的保护,故具有耐久的抗菌效果和优异的水洗牢度及干洗牢度
4．良好的防臭效果 能减少由微生物繁殖引起的恶臭，清新持久
5．对消费者安全卫生 无毒安全，无需使用含有甲醛的架桥剂，符合生态纺织品的要求，保护纤维的原有功能
6．良好的加工相容性 易于操作，可与分散染料、柔软、树脂、防污、防静电吸汗速干加工等整理同浴进行。对白度、色光、手感、强力和吸湿透气性无不良影响，长期贮藏后，使用前需充分搅拌
使用方法
抗菌防臭整理剂TPM9007处理织物的方法可以采用浸轧、浸渍、涂层等，TPM9007的一般用量为2～6%(o.w.f)，具体用量和用法根据被处理物的用途、种类、组成，及加工设备而确定。通常抗菌整理与染色采用同浴吸尽法进行加工。在与其他产品一起使用前建议进行预试。
● 浸轧法：
用 量： 抗菌防臭整理剂TPM9007 40~50g/L
溶解、稀释：加水，快速搅拌下加抗菌防臭剂TPM9007，然后加入非离子或阳离子有机硅柔软剂等,继续搅拌。制备配好的浴液应尽快使用。
织物处理： 在进行抗菌防臭卫生整理前，织物必须水洗干净。
工艺操作：
织物 漂染印花 烘干 浸轧抗菌溶液(浸轧温度20~40℃，轧液率60~90%，工作槽液量要小) 烘干(100~120℃) 高温拉幅（190~195℃×30s）
● 浸渍法：
抗菌防臭整理剂TPM9007 2~6%（o.w.f）
工艺操作：织物 抗菌染色柔软 脱水 烘干
● 涂层法：
抗菌防臭整理剂TPM9007能与非离子、阳离子、阴离子涂层胶混用，用量为3~5%，涂刮到基布上。
抗菌防臭整理剂TPM9007适用于散纤维、绞纱、筒子纱、机织物和针织物的处理，为了达到良好的渗透，筒子纱不要太紧密，液浴的循环采用正反方向。
工艺举例:
1、100%纯涤纶织物：
130℃x 20~60min
TPM9007 2~6%
分散染料 X%
醋酸调PH值4.0~5.5
1~3℃/min 降温洗净

室温

2、 聚酯/纤维素混纺 一浴法：
元明粉10~20g/L 130℃ x 30~40min
TPM9007 2~6%
分散剂 1~2g/L 2℃/min 活性染料X% 苏打,碱
分散染料 X% 2℃/min
醋酸调PH值=4~6 70℃
　　　　　　　 40~50min 10~20min 洗涤
10min 60~80℃
40~50℃

3、 100%尼龙织物, 溢流/喷射
95~100℃×30~60min

TPM9007 2~6%
渗透剂 1~2g/L
酸性或中性染料X% 1~2℃/min 水洗（同常规工艺）
醋酸调PH=4.5~6

20~40℃
Anti-bacterial and Anti-odor Finishing Agent TPM9007
[Use]
The anti-bacterial and anti-odor finishing agent TPM9007 is a suitable for finishing polyester fiber, polyamide fiber fabrics, such as clothes, underwear, sheet, working clothes, carpet, decorate cloth, and etc.

The anti-bacteria and anti-odor finishing agent TPM9007 is durable resistant to wash and safe. The agent has highly efficient and extensive for bacteria, mould property, and keep the fabric clean to prevent the bacteria to grow again. TPM9007 can unit the fiber and protected by the fiber, so it is resistant to washing. It can destroy the cell wall and change permeability of cell membrane. The cytoplasts in the cell dropped out, it can inhibit the bacterial protein to synthesize and cause the bacterial inner core aluminous body used up .The result is that bacterium was killed.

All over the world, many authorized units prove: fiber treated by TPM9007 has excellent in anti-bacterial, anti-odor and anti-mould. It is non-toxic to the human body and non-stimulation to the skin and formaldehyde-free. Furthermore, the fabric can provide prevention and cure of ringworm of the foot, eczema, odor from sweat, foot odor, and skin itches .TPM9007 is accord with American standard AATCC100 and Japanese standard JISL1902-2002. Anti-bacteria and anti-odor finishing agent TPM9007 has highly efficient and extensive for anti G+ or G-.
G+ G- Mould and yeast
MRSA E.coil Candida albicans
Bacillus subtilis Streptococcus pneumoniae Staphylococcus epidermidis
S.aureus Pseudomonas aeruginosa Aspergillus niger
[Property]
Chemical composition
Organic anti-bacteria agent
Appearance
Colorless to light yellow liquid, can be dispersed in water.
P H
5.57.0
Flash point
>100°C
Specific weight at20°C
1.06-1.08g/cm3
Viscosity (20°C)
<250 mpa ·s
Ionicity
Non-ionic
Solubility
Can be dispersed in water(30-40°C)
Compatibility
Compatible with non-ion , positive ion and negative ion, please do experiment before actual production
Fastness
Resistant to washing and excellent in fastness of dry-clean, ironing and pressing and sweat strain.
Toxicity/Pollution
Non-toxic and safe to body, no phenol and heavy metal chemical compound, no oral taking
Skin irritation
10% water solution is non-irritating, but the product is irritant to the eyes.

[Features and advantages]
Features
Advantages
Highly efficient
Low density has excellent anti-bacteria and anti-bacteria property
Broad-spectrum anti-bacteria property
Broad-spectrum anti-bacteria property for G+ ,G- , fungi and mould
Resistant washing
TPM9007 can be fixed in fiber and good durable anti-bacterial effect
Excellent effect in anti-odor
Can reduce the odor by bacteria breeding, lasting fresh
Security
Non-toxic and non-stimulation
Good consistence
Easy to use, and take the same bath with another agent, like disperse dyes, softener and so on

Apply note:
Anti-bacterial and anti-odor agent TPM9007 can be applied by padding, dipping, coating and spraying. The doses of the idiographic dosages are depending on variety of fabric and purpose. It usually anti-bacteria finish with disperse dyes. Please do some sample test first if it finish with another product.

● Padding:
Usage: Anti-bacterial and anti-odor agent TPM9007 40-50g/l
Dissolution: First put soft water into a clean barrel, add TPM9007at stirring condition, then add positive ion or non-ion softener, continue to stirring. Please use quickly.
Fiber treatment: Had better pre-washing the fabric.

·Padding process:
Fabric Bleaching and dyeing Curing Padding (Temperature 20-40°C, Expression 60-90%) Drying(100-120°C) Curing(190-195°C,30s)
·Dipping:
Usage: Anti-bacterial and anti-odor agent TPM9007 2-6%(o.w.f)
Dipping process:
Fabric Anti-bacteria dyeing and softening Separating water Drying

·Coating process:
Anti-bacterial and anti-odor finishing agent TPM can be used with non-ion, positive ion and negative ion coating 3-5%(o.w.f).

Anti-bacterial and anti-odor agent TPM9007 is suit for Casual fiber ,hank yarn Tube muslin, Aircraft fabrics and Knitting materials. To achieve good penetration, tube fabrics should not be too close, the cycle of a positive direction liquid bath.

1. Polyester fabric；
20-60min 130°c
TPM9007 2-6%
Disperse dyes X%
(Adjustment by HAC) PH= 4.0—5.5
1-3℃ /min Washing

Ambient temperature

2. Polyester/cotton fabric:
Refined mirabilite 10-20g/l 130℃x30-40min
TPM9007 2-6%
Disperser 1-2g/l 2℃/min Active dyes X% Sodium carbonate
Disperse dyes X%
(Adjust HAC) PH=4-6
　　　　　　　 70℃ 40-60min 10-20min Washing
10min 60-80℃
40-50℃
3.Nylon fabric:
30-60 min
90-100℃
TPM9007 2-6%
Penetrant, JFC 1-2g/l
Acid dye or neutral dyes X% 1-2℃/min
PH=4.5—6 (HAC adjust )
Washing(conventional)

20-40℃

Herst quality certificate:
You can receive the Herst quality certificate, if you agree on a simple contact and the products fit Herst standard. Please get the Herst quality certificate contract documentary.

Packaging and storage：
25kg or 120kg plastic barrel ，storage warehouse at above 0°C，storage life one year.