美国螺栓标准(ANSI-bolt-standards).doc

美国螺栓标准(ANSI bolt standards)
ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC

编号
中文名称
英文名称
ANSI C135.17-1988
架空线路架设用镀锌铁制螺栓型带导向螺纹的绝缘子柱销
Insulator Pins with Lead Threads for Overhead Line Construction, Galvanized Ferrous Bolt-Type
ANSI/API Std.600-2001
石油和天然气工业用螺栓接合钢制帽状阀门
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/ASME B18.10-2006
轨道螺栓及螺母
Track Bolt and Nuts
ANSI/ASME B18.15-1985
锻造有眼螺栓
Forged Eyebolts
ANSI/ASME B18.2.1-1996
四方和六角形螺栓和螺钉(英寸系列)
Square and Hex Bolts and Screws (Inch Series)
ANSI/ASME B18.2.1a-1999
四方和六角形螺栓和螺钉(英制系列)
Square and Hex Bolts and Screws (Inch Series)
ANSI/ASME B18.2.3.10M-1996
四方头螺栓(米制系列)
Square Head Bolts (Metric Series)
ANSI/ASME B18.2.3.5M-1979
米制六角形螺栓
Bolts, Metric Hex
ANSI/ASME B18.2.3.6M-1979
米制重六角形螺栓
Bolts, Metric Heavy Hex
ANSI/ASME B18.2.3.7M-1979
米制重六角形结构螺栓
Bolts, Metric Heavy Hex Structural
ANSI/ASME B18.2.8-1999
螺栓、螺钉和螺柱的通孔
Clearance Holes for Bolts, Screws and Studs
ANSI/ASME B18.2.9-2007
螺栓和螺钉用平直度量规和精确计量
Straightness Gage and Gaging for Bolts and Screws
ANSI/ASME B18.5-1990
圆头螺栓(英寸系列)
Round Head Bolts (Inch Series)
ANSI/ASME B18.5.2.1M-2006
米制园头短方颈杆的螺栓
Metric Round Head Short Square Neck Bolts
ANSI/ASME B18.5.2.2M-1982
米制圆头方颈螺栓
Bolts, Metric Round Head Square Neck
ANSI/ASME B18.5.2.3M-1990
米制大圆头方颈螺栓
Round Head Square Neck Bolts With Large Head (Metric)
ANSI/ASME B18.9-2007
防松螺栓
Plow Bolts
ANSI/ASME B5.1M-1985
T型槽.T型槽螺栓、螺母和榫舌
T-Slots - Their Bolts, Nuts, and Tongues
ANSI/ASME PCC-1-2005
压力限制螺栓连接法兰联轴节组件的导则
Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ANSI/ASTM A193/A 193M-2001
高温设备用合金钢和不锈钢螺栓材料规范
Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ANSI/ASTM A194/A 194M-2001
高压和高温设备用碳素钢与合金钢螺栓和螺母规范
Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
ANSI/ASTM A320/A 320M-2001
低温设备用合金钢螺栓材料规范
Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
ANSI/ASTM F1142-1990
半埋入式防油、防水、螺栓连接人孔盖组件规范
Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
ANSI/ASTM F1144-1990
半埋入式防油、防水螺栓连接的人孔盖组件规范
Specification for Manhole Cover Assembly, Bolted, Hinged, Semi-Flush, Oiltight and Watertight
ANSI/ASTM F1179-1997
螺栓螺纹锁定厌氧复合物检验程序惯例
Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ANSI/ASTM F704-1997
管道系统法兰接头用螺栓长度的选用惯例
Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ANSI/AWWA D103-1997
储水用加工涂覆螺栓连接钢罐
Water Storage, Factory-Coated Bolted Steel Tanks for
ANSI/IEEE C135.1-1999
架空线结构用镀锌钢螺栓和螺母标准
Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
ANSI/SAE J1061-1992
普通螺栓、螺钉和双头螺栓的表面不均匀性
Surface Discontinuities on General Application Bolts, Screws, and Studs
ANSI/SAE J123-1994
螺栓、螺纹、螺母表面断续疲劳试验
Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
ANSI/SAE J2295-1998
紧固件.零件标准帽螺钉、六角头螺栓和六角螺母
Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts
ANSI/SAE J370-1998
建筑和工业机械用螺栓和有头螺钉尺寸
Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery
ANSI/SAE J485-1998
扁销用螺栓孔与螺母螺杆尾和槽
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
ANSI/SAE J518-1993
四螺栓拼合法兰型液压法兰管、管道及软管接头
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
ANSI/SAE J663-1994
制动衬片铆钉和制动块螺栓
Rivets for Brake Linings and Bolts for Brake Blocks
ASME B 18.2.1 Erratum-2003
方头和六角头螺栓和螺钉(英寸系列).对ASME B 18.2.1-1996的勘误
(Square and hex bolts and screws (Inch series); Erratum to ASME B18.2.1-1996)
ASME B18.10-1982
道轨用螺栓和螺母
(Track bolts and nuts)
ASME B18.2.1-1996
英制方头和六角头螺栓和螺钉(英制系列)
(Square and hex bolts and screws (Inch series))
ASME B18.2.1a Addenda-1999
方头和六角头螺栓和螺钉(英制系列).附录
(Square and hex bolts and screws (inch series); Addenda)
ASME B18.2.3.5M Errata-1981
米制六角头螺栓,正误表
(Metric hex bolts; Errata)
ASME B18.2.3.5M-1979
米制六角头螺栓
(Metric hex bolts)
ASME B18.2.3.6M Errata-1981
米制重型六角头螺栓,正误表
(Metric heavy hex bolts; Errata)
ASME B18.2.3.6M-1979
米制重型六角头螺栓
(Metric heavy hex bolts)
ASME B18.2.3.7M Errata-1981
米制重型六角头结构螺栓,正误表
(Metric heavy hex structural bolts; Errata)
ASME B18.2.3.7M-1979
米制加重六角头结构螺栓
(Metric heavy hex structural bolts)
ASME B18.5-1990
英制圆头螺栓
(Round head bolts (Inch series))
ASME B18.5.2.1M Erratum-2003
米制圆头短方颈螺栓.技术勘误
(Metric round head short square neck bolts; Erratum)
ASME B18.5.2.1M-1996
米制圆头短方颈螺栓
(Metric round head short square neck bolts)
ASME B18.5.2.2M-1982
米制圆头方颈螺栓
(Metric round head square neck bolts)
ASME B18.5.2.3M-1990
带大头的米制圆头方颈螺栓
(Round head square neck bolts with large head (Metric series))
ASME B18.9-1996
防松螺栓(英制系列)
(Plow bolts (inch series))
ASME B5.1M-1985
T型槽及其螺栓.螺母和榫舌
(T-slots, their bolts, nuts, and tongues)
ASME PCC-1-2000
压力边界螺栓法兰连接组件导则
(Guidelines for pressure boundary bolted flange joint assembly)
ASTM A 1014/A 1014M-2006
高温设备用沉淀硬化螺栓材料(UNS N07718)的标准规范
Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service
ASTM A 183-2003
碳素钢制轨条螺栓和螺母的标准规范
Standard Specification for Carbon Steel Track Bolts and Nuts
ASTM A 193/A 193M-2007
高温或高压设备及其他特殊用途的合金钢和不锈钢螺栓连接材料用标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 194/A 194Ma-2007
高压或高温设备或高压高温设备的螺栓用碳素钢与合金钢螺母的标准规范
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A 307a-2007
抗拉强度为60000PSI的碳素钢螺栓和柱头螺栓用标准规范
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A 320/A 320Ma-2007
低温设备用合金钢和不锈钢螺栓材料的标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A 325-2007
最小抗拉强度为120/105ksi的热处理钢结构螺栓的标准规范
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM A 325M-2005
最小抗拉强度为830Mpa的热处理钢结构螺栓标准规范(米制)
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
ASTM A 354-2007
淬火和回火合金钢螺栓螺柱和其它外螺纹紧固件的标准规范
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A 394-2007
钢制输电塔镀锌螺栓和裸螺栓用标准规范
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM A 437/A 437M-2006
高温用经特殊处理的渦轮型合金钢螺栓材料标准规范
Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
ASTM A 449a-2007
通用最低拉伸强度为120/105/90ksi的热处理钢制六角头螺钉、螺栓和螺柱用标准规范
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A 453/A 453M-2004
具有同奥氏体不锈钢相似的膨胀系数的耐高温螺栓材料用标准规范
Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
ASTM A 490-2006
最小抗拉强度为150ksi的热处理合金钢结构螺栓标准规范
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM A 490Ma-2004
结构钢接头用10.9和10.9.3级高强度钢螺栓(米制)标准规范
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
ASTM A 540/A 540M-2006
特殊用合金钢螺栓材料的标准规范
Standard Specification for Alloy-Steel Bolting Materials for Special Applications
ASTM D 5652-1995
木和木基制品中螺栓连接的标准试验方法
Standard Test Methods for Bolted Connections in Wood and Wood-Base Products
ASTM F 1142-1998
防油防水半嵌入螺栓连接检查孔盖组件标准规范
Standard Specification for Manhole Cover Assembly Bolted, Semi-Flush, Oiltight and Watertight
ASTM F 1143-1998
防油防水隆起的螺栓连接检查孔盖组件标准规范
Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
ASTM F 1144-1998
防油防水半嵌入螺栓铰接检查孔盖组件
Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
ASTM F 1179-1988
螺栓螺纹锁定厌氧复合物使用的检验程序
Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM F 1554-2007
屈服应力为36、55和105ksi的钢制锚固螺栓用标准规范
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F 1852-2005
120/105KSI最小抗张强度的热处理钢制"拧松式"张力控制结构螺栓/螺母/垫圈配件的标准规范
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM F 2280-2006
150ksi最低拉伸强度的热螺纹钢制"扭开"型拉伸控制结构螺栓/螺母/衬垫组件的标准规范
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM F 2281-2004
耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范
Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM F 2328-2005
淬火和回火的螺纹钢螺栓、螺母和螺柱的脱碳和渗碳性测定的标准试验方法
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 2328M-2007
淬火和回火的螺纹钢螺栓、螺钉和螺柱的脱碳和渗碳性测定的标准试验方法(米制)
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
ASTM F 2329-2005
碳钢和合金钢螺栓、螺钉、垫圈、螺母和特殊螺纹紧固件用热浸镀锌覆层的标准规范
Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F 2437-2006
与螺旋帽、螺栓、锚和螺柱用碳和合金钢可压缩垫圈式直读张力指示器的标准规范
Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F 468-2006
一般用途有色金属螺栓、六角头螺钉及螺柱标准规范
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
ASTM F 468M-2006
一般用途有色金属螺栓、六角头螺钉及螺柱标准规范(米制)
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
ASTM F 541-2004
合金钢有眼螺栓的标准规范
Standard Specification for Alloy Steel Eyebolts
ASTM F 593-2002
不锈钢螺栓,六角头螺钉及螺柱标准规范
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F 704-1981
管道系统法兰接头用螺栓长度选择的标准实施规程
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ASTM F 738M-2002
不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
ASTM F 788/F 788M-2006
英制及米制系列的螺栓、螺钉及螺柱的表面不均匀性的标准规范
Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
ASTM F 901-1997
铝制传输塔用螺栓及螺母
Standard Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM G 116-1999
大气电流腐蚀用绕线螺栓试验
Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
IEEE C 135.1-1999
架空线结构用镀锌钢螺栓和螺母
(Zinc-coated steel bolts and nuts for overhead line construction)
编号
中文名称
英文名称

返回