ImageVerifierCode 换一换
格式:PPTX , 页数:23 ,大小:221.15KB ,
资源ID:4245584      下载积分:8 金币
验证码下载
登录下载
邮箱/手机:
验证码: 获取验证码
温馨提示:
支付成功后,系统会自动生成账号(用户名为邮箱或者手机号,密码是验证码),方便下次登录下载和查询订单;
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝    微信支付   
验证码:   换一换

开通VIP
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【https://www.zixin.com.cn/docdown/4245584.html】到电脑端继续下载(重复下载【60天内】不扣币)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录   QQ登录  
声明  |  会员权益     获赠5币     写作写作

1、填表:    下载求助     留言反馈    退款申请
2、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
3、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,个别因单元格分列造成显示页码不一将协商解决,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
4、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
5、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【w****g】。
6、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
7、本文档遇到问题,请及时私信或留言给本站上传会员【w****g】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。

注意事项

本文(材料力学专业英语.pptx)为本站上传会员【w****g】主动上传,咨信网仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知咨信网(发送邮件至1219186828@qq.com、拔打电话4008-655-100或【 微信客服】、【 QQ客服】),核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
温馨提示:如果因为网速或其他原因下载失败请重新下载,重复下载【60天内】不扣币。 服务填表

材料力学专业英语.pptx

1、Chapter1 Tension and Compression第一章第一章拉伸与压缩拉伸与压缩Axially Loaded Bar The simplest case to consider at the start is that of an initially straight metal bar of constant cross section,loaded at its ends by a pair of oppositely directed collinear forces coinciding with the longitudinal axis of the bar and

2、 acting through the centroid of each cross section.For static equilibrium the magnitudes of the forces must be equal.If the forces are directed away from the bar,the bar is said to be in tension;if they are directed toward the bar,a state of compression exists.These two conditions are illustrated in

3、 Fig.1-1.轴向受载杆件轴向受载杆件同线的同线的质心质心平衡平衡大小大小不变的不变的 首先我们研究最简单情况:一等截面金属直杆在其两首先我们研究最简单情况:一等截面金属直杆在其两端承受一对共线、反向力的作用。这两个力的作用线与各截端承受一对共线、反向力的作用。这两个力的作用线与各截面形心组成的纵向轴线重合,为了满足静力学平衡条件,这面形心组成的纵向轴线重合,为了满足静力学平衡条件,这两个力的数值必须相等。如果这两个力的方向是离开此杆的,两个力的数值必须相等。如果这两个力的方向是离开此杆的,杆将承受拉伸;如果这两个力是指向此杆的,杆将承受压缩,杆将承受拉伸;如果这两个力是指向此杆的,杆将承

4、受压缩,如图如图1-1所示。所示。Fig.1-1图1-1 Under the action of this pair of applied forces,internal resisting forces are set up within the bar and their characteristics may be studied by imagining a plane to be passed through the bar anywhere along its length and oriented perpendicular to the longitudinal axis of

5、 the bar.Such a plane is designated as a-a in Fig.1-2(a).Fig.1-2 图1-2垂直的,垂直的,正交的正交的 在这样两个力的作用之下,杆的内部将产生抗力。我们在这样两个力的作用之下,杆的内部将产生抗力。我们可以用位于杆轴某处、且与杆轴垂直的假想截面来研究杆的可以用位于杆轴某处、且与杆轴垂直的假想截面来研究杆的内部抗力,这样的截面如图内部抗力,这样的截面如图1-2(a)中的)中的a-a所示。所示。If for purposes of analysis the portion of the bar to the right of this

6、plane is considered to be removed,as in Fig.1-2(b),then it must be replaced by whatever effect it exerts upon the left portion.By this technique of introducing a cutting plane,the originally internal forces now become external with respect to the remaining portion of the body.For equilibrium of the

7、portion to the left this“effect”must be a horizontal force of magnitude P.However,this force P acting normal to the cross-section a-a is actually the resultant of distributed forces acting over this cross section in a direction normal to it.施加(力)施加(力)水平的水平的法线法线合力合力分布式的分布式的为了分析计算,可考虑将此截面右侧的杆段除去,如图为了分

8、析计算,可考虑将此截面右侧的杆段除去,如图1-2(b)所示。因而,必须补充右侧杆段对左侧杆段的作用。所示。因而,必须补充右侧杆段对左侧杆段的作用。用此处引入的截面法,初始的内力便成为保留杆段的外力。为用此处引入的截面法,初始的内力便成为保留杆段的外力。为使左侧杆段平衡,这种效应在数值上等于水平力使左侧杆段平衡,这种效应在数值上等于水平力P。然而,沿。然而,沿截面截面a-a法向作用的力法向作用的力P实际上是截面上法向分布力合成的结实际上是截面上法向分布力合成的结果。果。Fig.1-2 图1-2 Instead of speaking of the internal force acting on

9、 some small element of area,it is better for comparative purposes to treat the normal force acting over a unit area of the cross section.The intensity of normal force per unit area is termed the normal stress and is expressed in units of force per unit area,e,g.,1N/m2.Normal Stress法应力法应力把把称作称作比较的比较的

10、应力应力替代讨论作用在某处小面积上内力,最好转为处替代讨论作用在某处小面积上内力,最好转为处理单位面积上法向力。单位面积上法向力的强度理单位面积上法向力。单位面积上法向力的强度称为法应力,它是用单位面积上的作用力单位表称为法应力,它是用单位面积上的作用力单位表示的,亦即示的,亦即1If the forces applied to the ends of the bar are such that the bar is in tension,then tensile stresses are set up in the bar;if the bar is in compression we ha

11、ve compressive stresses.It is essential that the line of action of the applied end forces pass through the centroid of each cross section of the bar.如果杆端的力使杆拉伸,杆内就产生拉应力,如果杆是受压如果杆端的力使杆拉伸,杆内就产生拉应力,如果杆是受压缩的,杆内产生压应力。施加在杆端的力作用线必须通过每缩的,杆内产生压应力。施加在杆端的力作用线必须通过每一个截面形心。一个截面形心。The axial loading shown in Fig.1-

12、2(a)occurs frequently in structural and machine design problems.To simulate this loading in the laboratory,a test specimen is held in the grips of either an electrically driven gear-type testing machine or a hydraulic machine.Both of these machines are commonly used in materials testing laboratories

13、 for applying axial tension.Test Specimens试样样品样品夹具夹具电力地电力地液压的液压的应用,施加应用,施加 图图1-2(a)所示的轴向载荷经常出现在结构)所示的轴向载荷经常出现在结构和机械设计中,为了在实验室中模拟这种轴向载和机械设计中,为了在实验室中模拟这种轴向载荷,试件应夹持在电子或液压万能试验机的夹头荷,试件应夹持在电子或液压万能试验机的夹头中。这两种试验机通常在材料实验室用做施加轴中。这两种试验机通常在材料实验室用做施加轴向载荷。向载荷。In an effort to standardize materials testing techniqu

14、es the American Society for Testing Materials(ASTM)has issued specifications that are in common use.Only two of these will be mentioned here,one for metal plates thicker than in(4.76mm)and appearing as in Fig.1-3,the other for metals over 1.5in(38mm)thick and having the appearance shown in Fig.1-4.在

15、材料实验技术规范标准中,美国材料实验协会颁布在材料实验技术规范标准中,美国材料实验协会颁布了详细的使用说明。此处只讲其中两种试件。一种厚度超了详细的使用说明。此处只讲其中两种试件。一种厚度超过过3/16in(4.76mm)的金属板试件如图)的金属板试件如图1-3所示,另外一所示,另外一种直径为种直径为1.5in(38mm)的金属圆棒状试件如图)的金属圆棒状试件如图1-4所示。所示。标准化标准化As may be seen from these figures,the central portion of the specimen is somewhat smaller than the end

16、 regions so that failure will not take place in the gripped portion.The rounded fillets shown are provided so that no stress concentrations will arise at the transition between the two lateral dimensions.The standard gage length over which elongations are measured is 8in(203mm)for the specimen shown

17、 in Fig.1-3 and 2in(57mm)for that shown in Fig.1-4.正如图中所看到的,试件的中部区域尺寸略小于两端尺寸。正如图中所看到的,试件的中部区域尺寸略小于两端尺寸。因而,破环不会发生在两端的夹持段,过度圆角保证试件两因而,破环不会发生在两端的夹持段,过度圆角保证试件两种尺寸的过渡部位不会发生应力集中。供测量伸长的标距长种尺寸的过渡部位不会发生应力集中。供测量伸长的标距长度为度为8in(203mm,图,图1-3试件)和试件)和2in(51mm,图,图1-4试试件)。件)。稍微,有些稍微,有些失效,破坏失效,破坏过渡区过渡区伸长伸长标距标距 The elo

18、ngations are measured by either mechanical or optical extensometers or by cementing an electric resistance-type strain gage to the surface of the material.This resistance strain gage consists of a number of very fine wires oriented in the axial direction of the bar.As the bar elongates,the electrica

19、l resistance of the wires changes and this change of resistance is detected on a Wheatstone bridge and interpreted as elongation.伸长计伸长计粘贴粘贴电阻应变片电阻应变片细的细的转换转换 试件的伸长既可以使用机械的、光学的伸长计,试件的伸长既可以使用机械的、光学的伸长计,也可以使用粘贴在试件表面的电阻应变片来测量,也可以使用粘贴在试件表面的电阻应变片来测量,这种电阻应变片由若干个沿试件轴向的、很细的这种电阻应变片由若干个沿试件轴向的、很细的电阻丝组成。当试件伸长时,电

20、阻丝的电阻就会电阻丝组成。当试件伸长时,电阻丝的电阻就会发生改变,电阻的改变由惠斯通电桥测量并转换发生改变,电阻的改变由惠斯通电桥测量并转换为伸长量。为伸长量。Let us suppose that one of these tension specimens has been placed in a tension-compression testing machine and tensile forces gradually applied to the ends.The elongation over the gage length may be The elongation over

21、the gage length may be measured as indicated above for any predetermined measured as indicated above for any predetermined increments of the axial load.From these values the increments of the axial load.From these values the elongation per unit length,which is termed elongation per unit length,which

22、 is termed normal strain normal strain and denoted by and denoted by ,may be found by dividing the total,may be found by dividing the total elongation elongation by the gage length L,that is,by the gage length L,that is,=/L./L.The strain is usually expressed in units of inches per inch or meters per

23、 meter and consequently is dimensionless.Normal Strain法应变法应变应变应变增量增量 对于每一个事先指定的轴向载荷增量都要测对于每一个事先指定的轴向载荷增量都要测量相应的标距的伸长。由这些数值得到单位长度量相应的标距的伸长。由这些数值得到单位长度的伸长,并将之定义为法应变,用的伸长,并将之定义为法应变,用来表示,可以来表示,可以用标距长度用标距长度L去除总伸长去除总伸长来得到法应变。来得到法应变。As the axial load is gradually increased in increments,the total elongatio

24、n over the gage length is measured at each increment of load and this is continued until fracture of the specimen takes place.Knowing the original cross-sectional area of the test specimen the normal stress,denoted by,may be obtained for any value of axial load by the use of the relationStress-Strai

25、n Curve应力应力应变曲线应变曲线where P denotes the axial load in pounds or Newtons and A the original cross-sectional area.Having obtained numerous pairs of values of normal stress and normal strain,the experimental data may be plotted with these quantities considered as ordinate and abscissa,respectively.This

26、is the stress-strain curve or diagram of the material for this type of loading.Stress-strain diagrams assume widely differing forms for various materials.Figure 1-5 is the stress-strain diagram for a medium-carbon structural steel,Fig.1-6 is for an alloy steel,and Fig.1-7 is for hard steels and cert

27、ain nonferrous alloys.For nonferrous alloys and cast iron the diagram has the form indicated in Fig.1-8,while for rubber the plot of Fig.1-9 is typical.量,数量量,数量纵坐标纵坐标横坐标横坐标碳素结构钢碳素结构钢有色金属合金有色金属合金铸铁铸铁P是轴向载荷,是轴向载荷,A是初始截面积。于是,得到由法应是初始截面积。于是,得到由法应力力和法应变和法应变组成的很对数据对,然后分别以法应组成的很对数据对,然后分别以法应力为纵轴,法应变为横轴,用上述实

28、验数据作图,力为纵轴,法应变为横轴,用上述实验数据作图,这就是材料的应力这就是材料的应力应变曲线或拉伸图。图应变曲线或拉伸图。图1-5是碳是碳素结构钢的应力素结构钢的应力应变图,图应变图,图1-6是合金钢,图是合金钢,图1-7是是硬质刚或某些有色金属合金的应力硬质刚或某些有色金属合金的应力应变图,有色应变图,有色金属合金或铸铁的应力金属合金或铸铁的应力应变图如图应变图如图1-8所示,而对所示,而对于橡胶,图于橡胶,图1-9是典型的应力是典型的应力应变图。应变图。1.The concepts of stress and strain can be illustrated in an elemen

29、tary way by considering the extension of a prismatic bar.As shown in fig.1,a prismatic bar is one that has constant cross section throughout its length and a straight axis,in this illustration the bar is assumed to be loaded at its ends by axial forces P that produce a uniform stretching,or tension,

30、or the bar.At the left hand the tensile force 2.By making an artificial cut(section mm)through the bar at right angles to its axis,we an isolate part of the bar as a free body see Fig.1(b).At the left hand the tensile force P is applied,and at the other end there are forces representing the action of the removed portion of the bar upon the part that remains.These forces will be continuously distributed over the cross section,analogous to the continuous distribution of hydrostatic pressure over a submerged surface.At the left hand the tensile force

移动网页_全站_页脚广告1

关于我们      便捷服务       自信AI       AI导航        获赠5币

©2010-2024 宁波自信网络信息技术有限公司  版权所有

客服电话:4008-655-100  投诉/维权电话:4009-655-100

gongan.png浙公网安备33021202000488号   

icp.png浙ICP备2021020529号-1  |  浙B2-20240490  

关注我们 :gzh.png    weibo.png    LOFTER.png 

客服