清洁生产复习题.docx

清洁生产原理旳复习资料
1. Please fill the blank with the word needed ()
1) The main method of clean production is ____________________________.
2) The strategic core of implementing the clean production is to _______________
____________.
3) Train of thoughts for the clean production audit are to _______
to ______________________________________ and to ___________________
____________________________________.
4) The process of the clean production audit in enterprise can be divided 7 stages
which include _________________________, _______________________,
_____________________ ___________________________, _____
_________________________, ____________________________, ___________
________________________.
5) Clean production includes the utilization of clean ____________, clean ________
and clean products. 6) Clean production is a new production method and measurement on the organic
combination of __________________ benefit and _______________development.
7) The key element which impenetrate in the whole process of clean production is
the ____________________________________________.
8) Analysis on the reason of waste production and energy depletion should carry out
from the following 8 items, e.g. ____________________________,
_______________, ______________, ____________________________,
________________, ______________, ____________________.
2. Please fill the right choice in the brackets followed the corresponding caption ( )
1) Which is not right in the following expressions on the Clean Production? ()
A. Clean production don’t refer to production process only.
B. Conception of clean production is not only limited in CLEAN.
C. Clean production is not a temporary check
D. Clean production only emphasize pollution
2) Which is not the characteristics of clean production audit in the following
expressions? ()
A. is a single-use behavior B. has a distinct destination
C. emphasizes the prevention D. integrates with economic efficiency
3) _______ is main body to carry out clean production. ()
A. Government B. Social organization
C. Enterprise D. Scientific institution
4) Which is the right expression about clean production? ()
A. Clean production is to treat the pollutants in time
B. Clean production is to use the clean energy
C. Clean production refers to the clean production process
D. Clean production refers to the overall processes are clean such as the
exploitation of raw materials, fabrication of products, usage of products and
treatment of wastes.
5) The basic precondition for realizing the environmental protection is _____ ()
A. the participation of professional artisan
B. public participation
C. the participation of enterprises with a serious pollution
D. to ban the enterprises with a serious pollution
6) is the first stage of the clean production audit. ()
A. Pre-assessment B. assessment
C. Implementation of project D. Preparation and Organization
7) Which is one of tasks for the Preparation and Organization of the clean
production audit in the following captions? ()
A. Training and dissemination B. Setting up the targets of clean production
C. Establishing the balance of mass and main pollutants
D. Economic assessment
8) Setting up the targets of clean production is carried out in the __________ of
clean production audit. ()
A. sieve of projects B. assessment
C. preparation and organization D. pre-assessment
9) Summarizing the implemented results of non- and low cost projects is carried
out in the __________ of clean production audit. ()
A. sieve of projects B. feasibility analysisC. assessment D. pre-assessment
10) How many stages are involved in the clean production audit? ()。
A. 4 B. 7 C. 8 D. 6
11) In ‘green chemistry’ craft, the ideal purpose is to completely convert all atoms
in the reactants into the object products, whose atom economy reaches up to
100%. For the synthesis of CH2=C(CH3)COOCH3 from CH3C≡CH, in order or
gain the highest atom economy, which other reactants will be still needed? ()
A. CO, CH3OH B. CO2, H2O C. H2, CO2 D. CH3OH, H2
12) The green chemistry aims to completely convert all atoms in the reactants into
the object products without wastes emission. ______ fits the need of green
chemistry in the following process. ()
13) ________ is the characteristics of green chemistry. ()
A. Treatment of pollutants B. Disposal of pollution points
C. Reducing toxic chemicals D. stop the pollution resources
14) “Green chemistry” is the reactions with a technical and economic feasibility and
with little side-effects on the environment. ______ in following reactions does
not accord the original idea of the green chemistry. ()
A. SO2 removal of the tail gas in vitriol plant: SO2+2NH3+H2O= (NH4)2SO3
B. treatment of the tail gas in nitric acid plant: NO2+NO+NaOH=2NaNO3+H2O
C. Preparation of CuSO4: Cu + 2H2SO4(strong)＝CuSO4+SO2 ↑ + 2H2O
D. Preparation of CuSO4: Cu + O2= CuO ; CuO + H2SO4 (aqueous)＝CuSO4 + H2O
15) ______ in following reactions can embody the principle for the atom economy
of the green chemistry: ① displacement reaction ② combination reaction ③
decomposition reaction ④ substitution reaction ⑤ addition reaction ⑥
elimination reaction ⑦ polyaddition reaction ⑧ polycondensation reaction ()
A. ①②③ B. ②⑤⑦ C. only ⑦⑧ D. only ⑦
16) 由于原料和环境方面旳考虑，对生产中旳化学反映提出了绿色化学旳规定，
既有4种合成苯酚旳反映，最符合绿色化学生产过程旳是（ ）

17) The following materials can be used as oxidant: (1) O3, (2) K2CrO4, (3) H2O2,
(4) HNO3, (5) NaClO. The materials which don’t give rise to pollution upon
environment after oxidation are called as ‘green’ oxidants. So, ____ are green
oxidants in the above-mentioned 5 materials? ()
A. (1), (3) B. (2), (3, (4), (5) C. (2), (4), (5) D. (1), (5)
18) In the green organic synthesis, in order to reduce the pollution of organic
solvents on the environment, the synthesis methods carried out in ______ are
effective measurements. ()
A. aqueous phase B. solid phase
C. supercritical fluid CO2 system D. A+B+C
19) _____ in the discharged waste gas from chemical plant are the main reasons for
the formation of acid rain. ()
A. NOx B. SO2 C. CH4 D. A+B
20) In order to reduce or eliminate the pollution of coloring matters on the
environment, the scientists have adopted some effective countermeasures, for
example, ____. ()
A. not to use the coloring matters B. to exploit the substitutes
C. innovate the dyeing and finishing craft D. B+C
21) _____ is the best method to solve the more and more discarded plastics and
rubber. ()
A. dumping B. fling at the deep sea
C. resources recovery D. catalytic combustion
22) Green coating is the clean craft during the usage of coating materials. Their
functions include ______. ()
A. saving the coating material B. lowering cost
C. reducing the emission of toxic solvents D. A+B+C
23) In order to reduce the pollution of agricultural pesticides on the environment, it
is necessary to ___. ()
A. modify the types of agricultural pesticides B. innovate the skill of usage
C. synthetically prevent and control the plant diseases and insect pests
D. A+B+C
24) In the following processes for the production of ethylene epoxide, ____ has the
highest atom economy. ()
3. Give or × in the brackets followed the corresponding captions with the true or
false viewpoints
1) End of Pipe pollution controls that are not pollution prevention at source. (r)
2) Public access to information and public participation in decision-making is
essential to push for clean production systems.（r）
3) Clean production only fits the industrial enterprise.（w）
4) Enterprise must recover the products and packing materials which are involved in
the mandatory and enforceable toxic chemicals listed in the law. (r)
5) Fees from the clean production audit and organize training, dissemination can be
charged to cost. (r)
6) Emission of main pollutants for the audited enterprises listed in the mandatory
and enforceable ones should be publicized. (r)
7) View of the scene should be carried out in the stage of assessment. (w)

8) Setting up the targets of clean production can not involve the present situation of
enterprise. (w)
9) Chemistry is the science that understand the properties and the corresponding
reactions of matters. (w)
10) Natural matters are always beneficial to human being. (w)
11) Natural matters contain no chemicals. (w)
12) Catalysts can quicken the reaction. (r)
13) NO is harmful. (w)
14) The basic characteristics of green chemistry is zero release. (r)
15) Electrosynthesis is basically a green chemical craft with no harm. (r)
16) Solid-phase reaction without solvent accords with the demand of green chemistry.
(r)
17) The synthesis with water as solvent also accords with the demand of green
chemistry. (r)
18) The aqueous coating uses water as disperse medium, exhibits an incombustibility,
no toxicity, no pollution and resource costs. (r)
19) Green food is the natural food, contains no chemicals. (w)
20) All of agricultural pesticides are innoxious. (w)
21) The exploitation of green agricultural pesticides is one of purposes of developing
green chemistry. (r)
22) HCHO is the main pollutant for indoor air, is also a source with the highest
pollution depth. (r)
4. Short Answer Questions
1) What is clean production defined by UNEP?
答： 清洁生产是指“不断采用改善设计，使用清洁旳能源和原料，采用先进旳工
艺技术与设备、改善管理、综合运用等措施，从源头削减污染、提高资源
运用效率，减少或者避免生产、服务和产品使用过程中污染物旳产生和排
放，以减轻或者消除对人类健康和环境旳危害。”
Key:
Clean production is a new and creative way used in production process. By
clean production, it implies an integrated preventative environmental strategy is
employed throughout production process, products and services so as to
increase ecological efficiency and reduce risks imposed on human and
environment.
– For production process, clean production implies that raw material and
energy are to be economized, application of toxic raw materials is to be
annulled, and amount and toxicity of waste is to be reduced before
releasing waste in the process of production.
– For products, clean production connotes that negative impact on
products is reduced in the complete cycle from raw material
employment to the final treatment phase.
– As for services, it is required to bring environmental factors into
designed and provided services.
2) What is clean production defined by Law of China Promoting Clean
Production?
答：增进法所称旳清洁生产是指“不断采用改善设计，使用清洁旳能源和原料，
采用先进旳工艺技术与设备、改善管理、综合运用等措施，从源头削减污
染、提高资源运用效率，减少或者避免生产、服务和产品使用过程中污染
物旳产生和排放，以减轻或者消除对人类健康和环境旳危害。”
§ Improve design
§ Use clean energy and raw materials
§ Advanced process and device
§ Amend manage
§ Integrated utilization
§ Others
§ Cut pollution in the first place
§ Improve the efficient of resource
§ Avoid the production and discharge of pollutants during procedure, servers,
products use
§ To protect human and environment, and improve economic efficiency of
enterprise
3) What is clean production audit?
答： 清洁生产审核是指“按照一定程序，对生产和服务过程进行调查和诊断，找
出能耗高、物耗高、污染重旳因素，提出减少有毒有害物料旳使用、生产，
减少能耗、物耗以及废物产生旳方案，进而选定技术经济可行旳清洁生产
方案旳过程。”
Clean production audit is a systematic process to analyze and implement pollution
sources, courses resulting in wastes and solution to deal with them. It aims, by
analyzing and evaluating pollution sources prevention, to help enterprise in
seeking the methods to use resources (raw materials and accessories, energy and
water, etc.) in a highly effective way as possible as it can and reducing or
eliminating the generation and release of wastes. Clean production audit is an
important basis for enterprise to implement clean production, and it is the core
and key for clean production.
4) What advantages and benefits can the implementation of clean production give
the enterprise?
答:
a. 通过清洁生产，公司能实现节能、降耗、减污、减少产品成本和“废
物”解决费用，提高公司旳整体经济效益；
b. 避免或减少末端解决也许产生旳风险，改善生产工人旳劳动环境和操
作条件，减轻对职工健康旳影响；
c. 提高产品旳竞争力。
d. 实行清洁生产可以提高公司对环境产生最低限度旳生产能力和反复
运用生产产品旳能力，会使公司生产和销售产品旳机会增长。
e. 绿色市场旳诞生，将会促使具有绿色环境标志旳产品更具竞争力。
Key:
p Overcomes the inherent drawbacks of end-of-pipe treatment, embodies the
demand of sustainable development
p Is beneficial to improve the integral quality and manage level of enterprise
p Is helpful to mend the work environment, reduces the harm on the human, and
eliminates potential safety hazard
p Reduces the production and discharge of pollutants, improve the public figure
of enterprise
p Improves the competitive power of products, which is helpful to eliminate the
bulwark in the international trade
p Improves the realization on the total amount control of pollutants to a stable
standard, remit the contradiction between the environment pollution and
economic development
5) What are the ways of thinking on clean production audit?
答： 清洁生产审核和物料平衡找出废弃物产生部位并拟定产生量，这里旳
“废弃物”涉及多种废物和排放物。
Key:
Identify where the waste is going，analyze why the waste is produced, bring
forward how to reduce or eliminate waste, in order to Improve the utilization
efficiency of resource，reduce or eliminate the production of waste
6) What do the basic measures of implementing clean production include?
答： 实行清洁生产旳基本途径可概括为如下五个重要方面：1、原材料（涉及能
源）有效使用和替代；2、改革工艺和设备；3、改善运营操作管理；4、产
品改革替代；5、生产系统内部循环运用。
Key:
§ Improve design
§ Use clean energy and raw materials
§ Advanced process and device
§ Amend manage
§ Integrated utilization
7) Please list the Twelve Principals of GREEN CHEMISTRY
Key:
1. It is better to prevent waste than to treat or clean up waste after it is formed.
2. Synthetic methods should be designed to maximize the incorporation of all materials used
in the process into the final product.
3. Wherever practicable, synthetic methodologies should be designed to use and generate
substances that possess little or no toxicity to human health and the environment.
4. Chemical products should be designed to preserve efficacy of function while reducing
toxicity.
5. The use of auxiliary substances (e.g. solvents, separation agents, etc.) should be made
unnecessary whenever possible and, innocuous when used.
6. Energy requirements should recognized for their environmental and economic impacts and
should be minimized. Synthetic methods should be conducted at ambient temperature
and pressure.
7.A raw material feedstock should be renewable rather than depleting whenever technically
and economically practical.
8. Unnecessary derivatization (blocking group, protection/ deprotection, temporary
modification of physical/chemical processes) should be avoided whenever possible.
9. Catalytic reagents (as selective as possible) are superior to stoichiometric reagents.
10. Chemical products should be designed so that at the end of their function they do not
persist in the environment and break down into innocuous degradation products.
11. Analytical methodologies need to be further developed to allow for real-time in-process
monitoring and control prior to the formation of hazardous substances.
12. Substances