1、机械设计基础
课程设计说明书
设计题目 V带传动设计
设计组员 李亚霖、吴郅君、刘玲玲、张乐、万学赟
院 系 机电工程学院
专 业 电气工程及其自动化
指导老师 冯原
目录
一． 设计任务书················
2、··························································································3
二、 V带传动设计
1.确定计算功率········································································································3
2.选择V带带型·········································································
3、··························3
3.确定V带基准直径并验算带速·····································································3
4.确定V带中心距和基准长度····································································4
5.验算小带轮上包角········································································4
6.计算带根数·······
4、··································································5
7.计算带对轴作用力··············································································5
三、 V带轮结构设计
1.V带轮材料··························································································5
2.V带轮结构形式···················
5、············································6
3.V带轮槽型··············································································6
4.V带轮尺寸······································································6
四、 小带轮装配图············································································
6、························6
五、 参考文件··············································································································6
一、 设计任务书
1.题目：
设计由电动机驱动鼓风机V带传动。
图1所表示为传动机结构简图，主动带轮1直接装在电动机轴上，从动轮2装在鼓风机轴上，两带轮中心水平距离a约于大带轮直径d22倍。
图1
2.V带传动设计原始数据以下：
作业题号
鼓风机主轴转速n2
电动机型号
7、额定功率p/kw
满载转速n1
主轴直径D/mm
主轴轴长E/mm
一天工作时间/h
5
650
Y160M-4
11
1460
42
110
16
3.V带传动设计内容
选择V带型号、长度、根数；V带轮直径、包角、带速；V带传动中心距，V带对轴作用力等。
二、V带传动设计
设计计算及说明
1.确定计算功率
由参考文件[1]表6-4查得工作情况系数，
故
2.选择V带带型
依据,,由参考资料[1]表6-8选择B型带。
3.确定带轮基准直径并验算带速
1) 初选小带轮基准直径
由参考资料[1]表6-5和表6-6，取小带轮基准直径。
8、
2) 验算带速v
因为5m/s
浙ICP备2021020529号-1 | 浙B2-20240490 
