Android-RecyclerView模仿探探左右滑动布局.doc

Android-->RecyclerView模仿探探左右滑动布局
1:这种功能, 首先需要自己管理布局

继承 RecyclerView.LayoutManager , 显示自己管理布局, 比如最多显示4个view, 并且都是居中显示.
底部的View还需要进行缩放,平移操作.
public class OverLayCardLayoutManager extends RecyclerView.LayoutManager {
private static final String TAG = "swipecard";
public static int MAX_SHOW_COUNT = 4;
public static float SCALE_GAP = 0.05f;
public static int TRANS_Y_GAP;

public OverLayCardLayoutManager(Context context) {
//平移时, 需要用到的参考值
TRANS_Y_GAP = (int) (20 * context.getResources().getDisplayMetrics().density);
}

@Override
public RecyclerView.LayoutParams generateDefaultLayoutParams() {
//必须要实现的方法
return new RecyclerView.LayoutParams(ViewGroup.LayoutParams.WRAP_CONTENT, ViewGroup.LayoutParams.WRAP_CONTENT);
}

@Override
public void onLayoutChildren(RecyclerView.Recycler recycler, RecyclerView.State state) {
//在这个方法中进行View的布局操作.此方法会被调用多次.
detachAndScrapAttachedViews(recycler);
int itemCount = getItemCount();
if (itemCount < 1) {
return;
}
//top-3View的position
int bottomPosition;
//边界处理
if (itemCount < MAX_SHOW_COUNT) {
bottomPosition = 0;
} else {
bottomPosition = itemCount - MAX_SHOW_COUNT;
}

//从可见的最底层View开始layout，依次层叠上去
for (int position = bottomPosition; position < itemCount; position++) {
//1:重recycler的缓存机制中拿到一个View
View view = recycler.getViewForPosition(position);
//2:和自定义ViewGroup一样, 需要先addView
addView(view);
//3:和自定义ViewGroup一样, 也需要测量View的大小
measureChildWithMargins(view, 0, 0);
int widthSpace = getWidth() - getDecoratedMeasuredWidth(view);
int heightSpace = getHeight() - getDecoratedMeasuredHeight(view);
//4:和自定义ViewGroup的onLayout一样, 需要layout View.对View进行布局
//我们在布局时，将childView居中处理，这里也可以改为只水平居中
layoutDecoratedWithMargins(view, widthSpace / 2, heightSpace / 2,
widthSpace / 2 + getDecoratedMeasuredWidth(view),
heightSpace / 2 + getDecoratedMeasuredHeight(view));
/**
* TopView的Scale 为1，translationY 0
* 每一级Scale相差0.05f，translationY相差7dp左右
*
* 观察人人影视的UI拖动时，topView被拖动，Scale不变，一直为1.
* top-1View 的Scale慢慢变化至1，translation也慢慢恢复0
* top-2View的Scale慢慢变化至 top-1View的Scale，translation 也慢慢变化只top-1View的translation
* top-3View的Scale要变化，translation岿然不动
*/

//第几层,举例子，count =7， 最后一个TopView（6）是第0层，
int level = itemCount - position - 1;

//如果不需要缩放平移, 那么下面的代码可以注释掉...
//除了顶层不需要缩小和位移
if (level > 0 /*&& level < mShowCount - 1*/) {
//每一层都需要X方向的缩小
view.setScaleX(1 - SCALE_GAP * level);
//前N层，依次向下位移和Y方向的缩小
if (level < MAX_SHOW_COUNT - 1) {
view.setTranslationY(TRANS_Y_GAP * level);
view.setScaleY(1 - SCALE_GAP * level);
} else {//第N层在 向下位移和Y方向的缩小的成都与 N-1层保持一致
view.setTranslationY(TRANS_Y_GAP * (level - 1));
view.setScaleY(1 - SCALE_GAP * (level - 1));
}
}
}
}
}

2:布局好了之后, 就需要监听鼠标事件了

谷歌官方提供了一个ItemTouchHelper工具类, 对滑动进行了惨无人道的优越封装, 傻x都能用…
使用方法: new ItemTouchHelper(callback).attachToRecyclerView(recyclerView);就这么简单,
接下来的操作, 都在回调callback里面进行.
public class RenRenCallback extends ItemTouchHelper.SimpleCallback {

private static final String TAG = "RenRen";
private static final int MAX_ROTATION = 15;
OnSwipeListener mSwipeListener;
boolean isSwipeAnim = false;

public RenRenCallback() {
//第一个参数决定可以拖动排序的方向, 这里由于不需要拖动排序,所以传0
//第二个参数决定可以支持滑动的方向,这里设置了上下左右都可以滑动.
super(0, ItemTouchHelper.DOWN | ItemTouchHelper.UP | ItemTouchHelper.LEFT | ItemTouchHelper.RIGHT);
}

public void setSwipeListener(OnSwipeListener swipeListener) {
mSwipeListener = swipeListener;
}

//水平方向是否可以被回收掉的阈值
public float getThreshold(RecyclerView recyclerView, RecyclerView.ViewHolder viewHolder) {
//2016 12 26 考虑 探探垂直上下方向滑动，不删除卡片，这里参照源码写死0.5f
return recyclerView.getWidth() * /*getSwipeThreshold(viewHolder)*/ 0.5f;
}

@Override
public boolean onMove(RecyclerView recyclerView, RecyclerView.ViewHolder viewHolder, RecyclerView.ViewHolder target) {
//由于不支持滑动排序, 所以不需要处理此方法
return false;
}

@Override
public void onSwiped(RecyclerView.ViewHolder viewHolder, int direction) {
//当view需要滑动的时候,会回调此方法
//但是这个方法只是告诉你View需要滑动, 并不是对View和Adapter进行额外的操作,
//所以, 如果你需要实现滑动删除, 那么需要在此方法中remove item等.

//我们这里需要对滑动过后的View,进行恢复操作.
viewHolder.itemView.setRotation(0);//恢复最后一次的旋转状态
if (mSwipeListener != null) {
mSwipeListener.onSwipeTo(viewHolder, 0);
}
notifyListener(viewHolder.getAdapterPosition(), direction);
}

private void notifyListener(int position, int direction) {
Log.w(TAG, "onSwiped: " + position + " " + direction);
if (mSwipeListener != null) {
mSwipeListener.onSwiped(position, direction);
}
}

@Override
public float getSwipeThreshold(RecyclerView.ViewHolder viewHolder) {
//滑动的比例达到多少之后, 视为滑动
return 0.3f;
}

@Override
public void onChildDraw(Canvas c, RecyclerView recyclerView, RecyclerView.ViewHolder viewHolder, float dX, loat dY, int actionState, boolean isCurrentlyActive) {
super.onChildDraw(c, recyclerView, viewHolder, dX, dY, actionState, isCurrentlyActive);
//当你在滑动的过程中, 此方法一直会被回调, 就跟onTouch事件一样...
//先根据滑动的dx dy 算出现在动画的比例系数fraction
float swipeValue = (float) Math.sqrt(dX * dX + dY * dY);
final float threshold = getThreshold(recyclerView, viewHolder);
float fraction = swipeValue / threshold;
//边界修正 最大为1
if (fraction > 1) {
fraction = 1;
} else if (fraction < -1) {
fraction = -1
}
//对每个ChildView进行缩放 位移
int childCount = recyclerView.getChildCount();
for (int i = 0; i < childCount; i++) {
View child = recyclerView.getChildAt(i);
//第几层,举例子，count =7， 最后一个TopView（6）是第0层，
int level = childCount - i - 1;

if (level > 0) {
child.setScaleX(1 - SCALE_GAP * level + fraction * SCALE_GAP);

if (level < MAX_SHOW_COUNT - 1) {
child.setScaleY(1 - SCALE_GAP * level + fraction * SCALE_GAP);
child.setTranslationY(TRANS_Y_GAP * level - fraction * TRANS_Y_GAP);
} else {
//child.setTranslationY((float) (mTranslationYGap * (level - 1) - fraction * mTranslationYGap));
}
} else {
//最上层
//rotate
if (dX < -50) {
child.setRotation(-fraction * MAX_ROTATION);
} else if (dX > 50) {
child.setRotation(fraction * MAX_ROTATION);
} else {
child.setRotation(0);
}

if (mSwipeListener null) {
RecyclerView.LayoutParams params = (RecyclerView.LayoutParams) child.getLayoutParams();
final int adapterPosition = params.getViewAdapterPosition();
mSwipeListener.onSwipeTo(recyclerView.findViewHolderForAdapterPosition(adapterPosition), dX);
}
}
}
}

//扩展实现:点击按钮实现左滑效果
public void toLeft(RecyclerView recyclerView) {
if (check(recyclerView)) {
animTo(recyclerView, false);
}
}

//扩展实现:点击按钮实现右滑效果
public void toRight(RecyclerView recyclerView) {
if (check(recyclerView)) {
animTo(recyclerView, true);
}
}

private void animTo(final RecyclerView recyclerView, boolean right) {
final int position = recyclerView.getAdapter().getItemCount() - 1;
final View view = recyclerView.findViewHolderForAdapterPosition(position).itemView;

TranslateAnimation translateAnimation = new TranslateAnimation(Animation.RELATIVE_TO_SELF, 0,
Animation.RELATIVE_TO_SELF, right ? 1f : -1f,
Animation.RELATIVE_TO_SELF, 0f, Animation.RELATIVE_TO_SELF, 1.3f);
translateAnimation.setFillAfter(true);
translateAnimation.setDuration(300);
translateAnimation.setInterpolator(new DecelerateInterpolator());
translateAnimation.setAnimationListener(new Animation.AnimationListener() {
@Override
public void onAnimationStart(Animation animation) {

}

@Override
public void onAnimationEnd(Animation animation) {
isSwipeAnim = se;
recyclerView.removeView(view);
notifyListener(position,
x > view.getMeasuredWidth() / 2
?
ItemTouchHelper.RIGHT : ItemTouchHelper.LEFT);
}

@Override
public void onAnimationRepeat(Animation animation) {

}
});
view.startAnimation(translateAnimation);
}

private boolean check(RecyclerView recyclerView) {
if (isSwipeAnim) {
return false;
}
if (recyclerView == null || recyclerView.getAdapter() == null) {
return false;
}
if recyclerView.getAdapter().getItemCount() == 0) {
return false;
}
isSwipeAnim = true;
return true;
}

public interface OnSwipeListener {

/**
* @param direction {@link ItemTouchHelper#LEFT} / {@link ItemTouchHelper#RIGHT}
* {@link ItemTouchHelper#UP} or {@link ItemTouchHelper#DOWN}).
*/
void onSwiped(int adapterPosition, int direction);

/**
* 最上层View滑动时回调.
*
* @param viewHolder 最上层的ViewHolder
* @param offset 距离原始位置的偏移量
*/
void onSwipeTo(RecyclerView.ViewHolder viewHolder, float offset);
}

public static class SimpleSwipeCallback implements OnSwipeListener {

/**
* {@inheritDoc}
*/
@Override
public void onSwiped(int adapterPosition, int direction) {

}

/**
* {@inheritDoc}
*/
@Override
public void onSwipeTo(RecyclerView.ViewHolder viewHolder, float offset) {

}
}
}

看起来不难, 但是真正做的时候, 要处理的地方很多,

并且有些地方要思考很久, 才能实现效果.

总之,做了你才会发现1+1=2的魅力, just do it.