Microchip-MGC3030-3D手势识别和运动跟踪解决方案.docx

Microchip公司的MGC3030 3D手势识别和运动跟踪控制器是基于Microchip专利的GestIC®技术,采用电近场传感技术,包括了开发3D手势输入传感系统所有的块图,具有先进的3D信号处理单元,检测距离 0 到10 cm,接收器灵敏度优于1fF,位置速率200个位置/秒,主要用于音频产品,笔记本电脑/键盘/PC外设,家庭自动化,白色家电,工业开关,医疗产品,游戏控制器和音频控制.本文介绍了MGC3030主要特性及其功耗特性,外设特性, MGC3030框图, 控制系统架构图, 参考电路图以及Woodstar开发板主要特性和相应应用电路,装配图和材料清单.

Microchip’s MGC3X30 are 3D gesture recognition and motion tracking controller chips based on Microchip’s patented GestIC® technology. They enable usercommand input with natural hand and finger movements. Applying the principles of electrical nearfield sensing, the MGC3X30 contain all the building blocks to develop robust 3D gesture input sensing systems. Implemented as a low-power mixed-signal configurable controller, they provide a large set of smart functional features with integrated signal driver,a frequency adaptive input path for automatic noise suppression and a digital signal processing unit. Microchip’s on-chip Colibri Suite obsoletes processing needs at the host, reduces system power consumption resulting in low software development efforts for short time-to-market success. The MGC3XXX family represents a unique solution that provides gesture information of the human hand in real time. Dedicated chip family members add position data, touch or multi touch information to the free space gesture sensing.

The MGC3XXX allow the realization of a new generation of user interfaces across various industry markets.
傲壹电子(AO-Electronics) 官网： 中文网：
MGC3030主要特性:

• Recognition of 3D Hand Gestures and x, y, z Positional Data (MGC3130)
• Proximity and Touch Sensing
• Built-in Colibri Gesture Suite (running on chip)
• Advanced 3D Signal Processing Unit
• Detection Range: 0 to 10 cm
• Receiver Sensitivity: <1 fF
• Position Rate: 200 positions/sec
• Spatial Resolution: up to 150 dpi
• Carrier Frequency: 44 kHz to 115 kHz
• Channels Supported:
- Five receive (Rx) channels
- One transmit (Tx) channel
• On-chip Auto Calibration
• Low Noise Radiation due to Low Transmit Voltage and Slew Rate Control
• Noise Susceptibility Reduction:
- On-chip analog filtering
- On-chip digital filtering
- Automatic frequency hopping
• Enables the use of Low-Cost Electrode Material including:
- Printed circuit board
- Conductive paint
- Conductive foil
- Laser Direct Structuring (LDS)
- Touch panel ITO structures
• Field Upgrade Capability
• Operating Voltage: 3.3V (+/-5%) (single supply)
• Temperature Range: -20℃ to +85℃
MGC3030功耗特性:
• Variety of Several Power Operation modes include:
- Processing mode: 20 mA @ 3.3V, typical
- Programmable Self Wake-up: 110 μA @ 3.3V
- Deep Sleep: 9 μA @ 3.3V, typical
MGC3030外设特性:
• 1x I2C™ Interface for Configuration and Sensor output streaming
• Five Gesture Port pins for individual mapping of gesture to EIOs
MGC3030应用:
• Audio Products
• Notebooks/Keyboards/PC Peripherals
• Home Automation
• White Goods
• Switches/Industrial Switches
• Medical Products
• Game Controllers
• Audio Control

图1. MGC3030框图

图2. MGC3030控制系统架构图

图3. MGC3030参考电路图

Woodstar开发板

The Woodstar Development Kit is designed to support an easy integration of Microchip’s MGC3030 3D Gesture Controller into the customer’s applications. It provides MGC3030 system setup, related hardware and software references:

• Aurea Software Package with the Aurea Graphical User Interface and GestIC Library
• MGC3030/3130 Software Development Kit (SDK)
• MGC3030/3130 PIC18 Host Reference code
With the help of these tools, the design-in process can be easily performed in five steps:
1. Feature Definition
2. Electrode Design
3. MGC3030 Parameterization
4. Host Application Programming
5. Verification
Woodstar hardware builds a complete MGC3030 reference system consisting of three
individual PCBs:
• MGC3030 Unit
• I2C™ to USB Bridge
• Reference Electrode with a 95x60 mm sensitive area
It can be plugged to a PC via a USB cable and used for evaluation of the MGC3030
chip and the GestIC technology. During the customer’s design-in process the individual
boards can be combined according to the customer’s needs.
Three examples are given below:
• Combine the MGC3030 unit and the I2C to USB bridge to evaluate customized electrodes
• Use the I2C to USB bridge to parameterize and debug the MGC3030 application circuitry in the customer’s design
• Combine the MGC3030 unit and electrodes to develop gesture-driven applications for PC-based or embedded software environments
Woodstar开发板包括:
• MGC3030 Module
• I2C to USB Bridge Module
• Reference Electrode (95x60 mm sensitive area)
• USB Cable for PC Connection

图4. Woodstar开发板套件外形图

图5. MGC3030带内部开关的参数化电路图

图6. MGC3030带外部开关的参数化电路图

图7. MGC3030基于USB应用的参数化电路图

图8. I2C到USB桥的电路图

图9. I2C到USB桥的装配图

图10. MGC3030单元的电路图
I2C到USB桥材料清单:

I2C到USB桥安装选择件:

MGC3030单元材料清单:
2010年读书节活动方案
一、     活动目的：
书是人类的朋友，书是人类进步的阶梯！为了拓宽学生的知识面，通过开展“和书交朋友，遨游知识大海洋”系列读书活动，激发学生读书的兴趣，让每一个学生都想读书、爱读书、会读书，从小养成热爱书籍，博览群书的好习惯，并在读书实践活动中陶冶情操，获取真知，树立理想！
二、活动目标：
1、通过活动，建立起以学校班级、个人为主的班级图书角和个人小书库。
2、通过活动，在校园内形成热爱读书的良好风气。
3、通过活动，使学生养成博览群书的好习惯。
4、通过活动，促进学生知识更新、思维活跃、综合实践能力的提高。
三、活动实施的计划
1、 做好读书登记簿
（1） 每个学生结合个人实际，准备一本读书登记簿，具体格式可让学生根据自己喜好来设计、装饰，使其生动活泼、各具特色，其中要有读书的内容、容量、实现时间、好词佳句集锦、心得体会等栏目，高年级可适当作读书笔记。
（2） 每个班级结合学生的计划和班级实际情况，也制定出相应的班级读书目标和读书成长规划书，其中要有措施、有保障、有效果、有考评，简洁明了，易于操作。
（3）中队会组织一次“读书交流会”展示同学们的读书登记簿并做出相应评价。
2、 举办读书展览：
各班级定期举办“读书博览会”，以“名人名言”、格言、谚语、经典名句、“书海拾贝”、“我最喜欢的＿＿＿”、“好书推荐”等形式，向同学们介绍看过的新书、好书、及书中的部分内容交流自己在读书活动中的心得体会,在班级中形成良好的读书氛围。
3、 出读书小报：