ISO 标准动态.docx

ISO标准动态
（2005.8.3——2005.9.20）
阶段
技术委员会
标准号
标准名称
CD
TC 22
ISO/CD 6460-1
摩托车—气体排出和燃料消耗的测量方法—第1部分：一般试验要求（ISO 6460:1981的修订）
Motorcycles – Measurement method of gaseous exhaust emissions and fuel consumption – Part 1: General test requirement(Revision of ISO 6460:1981)
ISO/CD 6460-2
摩托车—气体排出和燃料消耗的测量方法—第2部分：试验循环和特殊试验条件（ISO 6460:1981的修订）
Motorcycles – Measurement method of gaseous exhaust emissions and fuel consumption – Part 2: Test cycles and specific test condition(Revision of ISO 6460:1981)
ISO/CD 6460-3
摩托车—气体排出和燃料消耗的测量方法—第3部分：恒速下燃料消耗测量（ISO 6460:1981的修订）
Motorcycles – Measurement method of gaseous exhaust emissions and fuel consumption – Part 3: Fuel consumption measurement at a constant speed(Revision of ISO 6460:1981)
ISO/CD 23013
道路车辆—车辆玻璃装置用安全玻璃结构强制进入测定—玻璃装置系统的试验
Road vehicles – Determination to forced entry of safety glass constructions used in vehicle glazing – Test of glazing systems
TC 23
ISO/CD 6532
便携式链锯—技术数据（ISO 6532:1993的修订）
Portable chain-saws -- Technical data (Revision of ISO 6532:1993)
ISO/CD 11682
割灌机和割草机—技术数据（ISO 11682:1993的修订）
Brush-cutters and grass-trimmers -- Technical data (Revision of ISO 11682:1993)
TC 28
ISO/CD 13736
石油产品和其他液体—闪点的测定—阿贝尔闭口杯法（ISO 13736:1997的修订）
Petroleum products and other liquids -- Determination of flash point -- Abel closed cup method (Revision of ISO 13736:1997)
TC 34
ISO/CD TS 22003
食品安全管理体系—提供食品安全管理体系审核和认证机构的要求
Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems
ISO/CD 24557
豆类植物—水分的测定—风干法
Pulses -- Determination of moisture content -- Air-oven method
TC 38
ISO/CD 9073-16
纺织品—无纺布的试验方法—第16部分：评估耐水性能（流体静压）试验
Textiles -- Test methods for nonwovens -- Part 16: Evaluation of water resistance (hydrostatic pressure) test
ISO/CD 9073-17
纺织品—无纺布的试验方法—第17部分：评估渗水性能（喷洒冲击）试验
Textiles -- Test methods for nonwovens -- Part 17: Evaluation of water penetration (spray impact) test
ISO/CD 9073-18
纺织品—无纺布的试验方法—第18部分：使用抓样拉伸试验测定无纺布料的断裂强度和伸长率
Textiles -- Test methods for nonwovens -- Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
TC 44
ISO/CD TR 25901
焊接和相关过程—词汇
Welding and related processes -- Vocabulary
TC 54
ISO/CD 3061
黑胡椒油（ISO 3061:1979的修订）
Oil of black pepper(Revision of ISO 3061:1979)
ISO/CD 9841
海索草油（ISO 9841:1991的修订）
Oil of Hyssop (Hyssopus officinalis Linnaeus) (Revision of ISO 9841:1991)
TC 59
ISO/CD 21542
房屋结构—房屋环境的易接近性和可用性
Building construction – Accessibility and usability of build environment
TC 67
ISO/CD 10423
石油和天然气工业—钻井和生产设备—井口和采油设备（ISO 10423:2003的修订）
Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment(Revision of ISO 10423:2003)
TC 69
ISO/CD TR 8550-1
批中离散项目检验抽样系统的选择和使用指南—第1部分：抽样的一般指南（ISO/TR 8550:1994的修订）
Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 1: General guide to acceptance sampling(Revision of ISO/TR 8550:1994)
TC 76
ISO/CD 22413
药用制剂的输液器组合—要求、试验
Transfer sets for pharmaceutical preparations -- Requirements and test methods
TC 98
ISO/CD 13823
耐久性结构设计的一般原则
General principles on the design of structures for durability
TC 121
IEC/CD 60601-2-16
电子医疗设备—第2-16部分：血透、血滤和血滤设备的安全和基本性能特殊要求
Medical electrical equipment - Part 2-16: Particular requirements for the safety of haemodialysis, haemodiafiltration and haemofiltration equipment
IEC/CD 60601-2-53
电子医疗设备—第2-53部分：计算机辅助心电描记标准通信协议的安全和基本性能特殊要求
Medical electrical equipment, Part 2-53: Particular requirements for the safety and essential performance of a standard communications protocol for computer assisted electrocardiography
TC 126
ISO/CD 22303
烟叶—烟叶特殊亚硝胺的测定—使用缓冲剂萃取法
Tobacco - Determination of tobacco specific nitrosamines - Method using buffer extraction
TC 131
ISO/CD 10770-3
液压传动—电调制液压控制阀—第3部分：两通流量控制阀的试验方法
Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 3: Test methods for two-way directional flow control valves
TC 138
ISO/CD 25780
压力和非压力供水、排灌或排水和下水用塑料管系统—以不饱和聚酯（UP）树脂为基础的玻璃纤维增强热固塑料（GRP）系统—使用无管沟结构技术安装的部件
Plastics piping systems for pressure and non-pressure water supply, irrigation or drainage and sewerage -- Glass reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Components intended to be installed using trenchless construction techniques
TC 150
ISO/CD 23317
外科植入物—植入材料磷灰石成型能力的体外测量
Implants for surgery -- In vitro measurement for apatite-forming ability of implant materials
TC 159
ISO/CD 1503
立体定向及运动方向设计的人类工效学（ISO 1503:1977的修订）
Ergonomic requirements for design on spatial orientation and directions of movements (Revision of ISO 1503:1977)
ISO/CD 9241-20
人类工效学系统的相互作用—信息通信设备和服务的可存取指南—第20部分：一般指南
Ergonomics of human system interaction – Accessibility guideline for information communication equipment and services – Part 20: General Ergonomic
TC 171
ISO/CD 24537
缩微摄影技术—16mm和35mm缩微胶片用卷轴的尺寸
Micrographics -- Dimensions for reels used for 16 mm and 35 mm microfilm
TC 172
ISO/CD 10110-7
光学和光学仪器—光学元件和系统制图准备—第7部分：表面疵病公差（ISO 10110-7:1996的修订）
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 7: Surface imperfection tolerances(Revision of ISO 10110-7:1996)
TC 173
ISO/CD 23600
盲人和盲聋人用辅助产品—人行交通信灯的听觉和触觉信号
Assistive products for vision impaired persons and vision and hearing impaired persons -- Acoustic and tactile signals for pedestrian traffic lights
TC 190
ISO/CD 22036
土壤质量—用电感耦合等离子原子发射光谱法（ICP AES）测定土壤萃取物中的微量元素
Soil quality -- Determination of trace elements in extracts of soil by inductively coupled plasma atomic emission spectrometry (ICP AES)
TC 195
ISO/CD 21873
建筑结构机械和设备—移动式混凝土轧碎机—回应商用规范的术语
Building construction machinery and equipment -- Mobile concrete crushers -- Terminology ans commercial specifications
TC 198
ISO/CD 15882
保健产品的消毒—化学指示器—选择、使用和结果解释的指南（ISO 15882:2003的修订）
Sterilization of health care products -- Chemical indicators -- Guidance for selection, use and interpretation of results(Revision of ISO 15882:2003)
TC 202
ISO/CD 22493
微束分析—电子扫描显微镜——词汇
Micorbeam analysis -- Scanning electron microscopy -- Vocabulary
TC 204
ISO/CD 24534-1
自动车辆和设备识别—车辆的电子登记识别（ERI）—第1部分：体系结构
Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 1: Architecture
ISO/CD 24534-2
自动车辆和设备识别—车辆的电子登记识别（ERI）—第2部分：操作要求
Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 2: Operational requirements
ISO/CD 24534-3
自动车辆和设备识别—车辆的电子登记识别（ERI）—第3部分：车辆数据
Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 3:Vehicle data
ISO/CD 24534-4
自动车辆和设备识别—车辆的电子登记识别（ERI）—第4部分：使用非对称技术的安全通信
Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 4: Secure communication using asymetric techniques
DIS
IIW
ISO/DIS 24497-1
无损检验—金属磁存储—第1部分：一般要求
Non-destructive testing -- Metal magnetic memory -- Part 1: General requirements
ISO/DIS 24497-2
无损检验—金属磁存储—第2部分：术语和定义
Non-destructive testing -- Metal magnetic memory -- Part 2: Terms and definitions
ISO/DIS 24497-3
无损检验—金属磁存储—第3部分：焊缝检测
Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints
TC 8
ISO/DIS 8468
船舶桥楼布置和相关设备—要求和指南（ISO 8468:1990的修订）
Ship's bridge layout and associated equipment -- Requirements and guidelines(Revision of ISO 8468:1990)
TC 20
ISO/DIS 6771
航空航天—流体系统和组件—压力和温度分类（ISO 6771:1987的修订）
Aerospace -- Fluid systems and components -- Pressure and temperature classifications(Revision of ISO 6771:1987)
ISO/DIS 21849
航空器和航天—工业数据—产品识别和可追溯性（ISO/TS 21849:2003的修订）
Aircraft and space -- Industrial data -- Product identification and traceability(Revision of ISO/TS 21849:2003)
TC 22
ISO/DIS 4928
使用非石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封圈（最高工作温度1200C）（ISO 4928:1980的修订）
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) (Revision of ISO 4928:1980)
ISO/DIS 4930
使用非石油基液压制动液的液压制动盘式液压缸的弹性密封圈（最高工作温度1500C）（ISO 4930:1978的修订）
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 degrees C max.) (Revision of ISO 4930:1978)
ISO/DIS 6119
使用非石油基液压制动液的液压制动盘式液压缸的弹性密封圈（最高工作温度1200C）（ISO 6119:1980的修订）
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) (Revision of ISO 6119:1980)
ISO/DIS 7299-1
柴油发动机—油泵端面法兰—第1部分：喷油泵（ISO 7299:1996的修订）
Diesel engines -- End-mounting flanges for pumps -- Part 1: Fuel injection pumps(Revision of ISO 7299:1996)
ISO/DIS 16232-1.2
道路车辆—流体电路部件的清洁—第1部分：词汇
Road vehicles -- Cleanliness of components of fluid circuits -- Part 1: Vocabulary
ISO/DIS 16232-2.2
道路车辆—流体电路部件的清洁—第2部分：采用搅拌提取污垢法
Road vehicles -- Cleanliness of components of fluid circuits -- Part 2: Method of extraction of contaminants by agitation
ISO/DIS 16232-3.2
道路车辆—流体电路部件的清洁—第3部分：采用加压冲洗提取污垢法
Road vehicles -- Cleanliness of components of fluid circuits -- Part 3: Method of extraction of contaminants by pressure rinsing
ISO/DIS 16232-4.2
道路车辆—流体电路部件的清洁—第4部分：采用超声波技术提取污垢法
Road vehicles -- Cleanliness of components of fluid circuits -- Part 4: Method of extraction of contaminants by ultrasonic techniques
ISO/DIS 16232-5.2
道路车辆—流体电路部件的清洁—第5部分：在功能试验台上提取污垢法
Road vehicles -- Cleanliness of components of fluid circuits -- Part 5: Method of extraction of contaminants on functional test bench
ISO/DIS 16232-6.2
道路车辆—流体电路部件的清洁—第6部分：采用重量分析测定颗粒质量
Road vehicles -- Cleanliness of components of fluid circuits -- Part 6: Particle mass determination by gravimetric analysis
ISO/DIS 16232-7.2
道路车辆—流体电路部件的清洁—第7部分：采用显微分析测定颗粒大小和计数
Road vehicles -- Cleanliness of components of fluid circuits -- Part 7: Particle sizing and counting by gravimetric analysis
ISO/DIS 16232-8.2
道路车辆—流体电路部件的清洁—第8部分：采用显微分析测定颗粒性质
Road vehicles -- Cleanliness of components of fluid circuits -- Part 8: Particle nature by gravimetric analysis
ISO/DIS 16232-9.2
道路车辆—流体电路部件的清洁—第9部分：采用自动消光颗粒计数器测定颗粒大小和计数
Road vehicles -- Cleanliness of components of fluid circuits -- Part 9: Particle sizing and counting by automatic light extinction particle counter
ISO/DIS 16232-10.2
道路车辆—流体电路部件的清洁度—第10部分：结果的表示
Road vehicles -- Cleanliness of components of fluid circuits -- Part 10: Expression of results
TC 23
ISO/DIS 4254-5
农业机械—安全—第5部分：动力驱动耕地设备（ISO 4254-5:1992的修订）
Agricultural machinery -- Safety -- Part 5: Power-driven soil-working equipment(Revision of ISO 4254-5:1992)
ISO/DIS 9635-1
农业灌溉设备—灌溉阀—第1部分：一般要求（ISO 9635:1990的修订）
Agricultural irrigation equipment -- Irrigation valves -- Part 1: General requirements(Revision of ISO 9635:1990)
ISO/DIS 9635-2
农业灌溉设备—灌溉阀—第2部分：隔离阀（ISO 9635:1990的修订）
Agricultural irrigation equipment -- Irrigation valves -- Part 2: Isolating valves(Revision of ISO 9635:1990)
ISO/DIS 9635-3
农业灌溉设备—灌溉阀—第3部分：检查阀（ISO 9635:1990的修订）
Agricultural irrigation equipment -- Irrigation valves -- Part 3: Check valves(Revision of ISO 9635:1990)
ISO/DIS 9635-4
农业灌溉设备—灌溉阀—第4部分：空气阀（ISO 9635:1990的修订）
Agricultural irrigation equipment -- Irrigation valves -- Part 4: Air valves(Revision of ISO 9635:1990)
ISO/DIS 9635-5
农业灌溉设备—灌溉阀—第5部分：控制阀（ISO 9635:1990的修订）
Agricultural irrigation equipment -- Irrigation valves -- Part 5: Control valves(Revision of ISO 9635:1990)
ISO/DIS 9911
农业灌溉设备—手动操作小型塑料阀（ISO 9911:1993的修订）
Agricultural irrigation equipment – Manually operated small plastics valves(Revision of ISO 9911:1993)
ISO/DIS 11783-10
农业和林业用拖拉机和机械—系列控制和通信数据网—第10部分：任务控制器和管理信息系统数据交换
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 10: Task controller and management information system data interchange
TC 24
ISO/DIS 21501-2
粒度分布的测定—单粒光作用法—第2部分：光散射液体中粒度计数器
Determination of particle size distribution -- Single particle light-interaction methods -- Part 2: Light-scattering liquid-borne particle counter
ISO/DIS 21501-3
粒度分布的测定—单粒光作用法—第3部分：消光液体中粒度计数器
Determination of particle size distribution -- Single particle light-interaction methods -- Part 3: Light-extinction liquid-borne particle counter
ISO/DIS 21501-4
粒度分布的测定—单粒光作用法—第4部分：清洁空间光散射液体中粒度计数器
Determination of particle size distribution -- Single particle light-interaction methods -- Part 4: Light-scattering airborne particle counter for clean spaces
TC 29
ISO/DIS 1711-1
螺钉和螺母用装配工具—技术规范—第1部分：手动扳手和套筒（ISO 1711-1:1996的修订）
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets(Revision of ISO 1711-1:1996)
ISO/DIS 2351-1
螺钉和螺母用装配工具—机动螺钉旋具—第1部分：一字槽螺钉旋具头（ISO 2351-1:2002的修订）
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 1: Screwdriver bits for slotted head screws(Revision of ISO 2351-1:2002)
ISO/DIS 2725-1
螺钉和螺母用装配工具—方头传动套筒—第1部分：手动套筒（ISO 2725-1:1996的修订）
Assembly tools for screws and nuts – Square drive sockets -- Part 1: Hand-operated sockets(Revision of ISO 2725-1:1996)
ISO/DIS 2725-2
螺钉和螺母用装配工具—方头传动套筒—第2部分：机动套筒（ISO 2725-1:1996的修订）
Assembly tools for screws and nuts – Square drive sockets -- Part 2: Machine-operated sockets(Revision of ISO 2725-1:1996)
TC 34
ISO/DIS 6579:2002/
Damd 1
食品和饲料的微生物学—检测沙门氏菌属的平行法—修改1：附录D：动物粪便和初始生产阶段样品的沙门氏菌物种检测
Microbiology of food and animal feeding stuffs -- Horizontal method for the detection of Salmonella spp. – Amendment 1: Annex D: Detection of Salmonella spp. in animal faeces and in samples from the primary production stage
ISO/DIS 9233-1
干酪、干酪皮和加工干酪—游酶素含量的测定—第1部分：干酪皮分子吸收光谱法（ISO 9233:1991的修订）
Cheese, cheese rind and processed cheese -- Determination of natamycin content -- Part 1: Molecular absorption spectrometric method for cheese rind(Revision of ISO 9233:1991)
ISO/DIS 9233-2
干酪、干酪皮和加工干酪—游酶素含量的测定—第2部分：干酪、干酪皮和加工干酪高性能液体色谱法（ISO 9233:1991的修订）
Cheese, cheese rind and processed cheese -- Determination of natamycin content -- Part 2: Method using high-performance liquid chromatography for Cheese, cheese rind and processed cheese (Revision of ISO 9233:1991)
ISO/DIS 21415-2
小麦和小麦粉—面筋含量—第2部分：采用机械法测定湿面筋含量（ISO 7495:1990的修订）
Wheat and wheat flour -- Gluten content -- Part 2: Determination of wet gluten by mechanical means(Revision of ISO 7945:1990)
TC 35
ISO/DIS 12944-5
色漆和清漆—防护漆体系对钢结构的腐蚀防护—第5部分：防护漆体系（ISO 12944-5:1998的修订）
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems(Revision of ISO 12944-5:1998)
ISO/DIS 16276-2
防护漆体系对钢结构的腐蚀防护—干膜的评定、验收准则、粘结力/粘合力（断裂强度）—第2部分：横切试验和十字切试验
Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry fil