旋具头接头BIT.docx

旋具头接头BIT   ADAPTOR
旋具头棘轮扳手BIT   RATCHET
旋具头螺丝起子BIT   SCREWDRIVER
旋具头延长杆BIT   EXTENSION
旋具头SCREWDRIVER   BITS
1'.....
风动套筒IMPACT   SOCKET
风动套筒附件ACCESSORIES   FOR   IMPACT   SOCKET
手动操作冲击手柄HAND-OPERATED   INPACT   DRIVER
摩擦式梅花棘轮扳手FRICTION   TYPE   RATCHET   WITH   RING   WITH   BI-HEXAGON
摩擦式四方棘轮扳手FRICTION   TYPE   RATCHET   WITH   SQUARE   RING
安装扳手/尖尾扳手CONSTRUCTION   RATCHET   BI-HEXAGON
0.6-5.4NM扭力螺丝起子TORQUE   SCREWDRIVER   HANDLE   0.6-5.4NM
3C一字螺丝起子3C-SCREWDRIVER   FOR   SLOTTED   HEAD   SCREWS
3C十字PH螺丝起子3C-SCREWDRIVER   FOR   CRUCIFORM   HEAD   PH
3C米字螺丝起子
3C星型螺丝起子
3C球头六角螺丝起子
5件/6件/7件/155件螺丝起子套装SET   FOR   HEAD   SCREWS
电工螺丝旗子ELECTRONIC   SCREWDRIVER
木柄螺丝起子SCREWDRIVERS   WITH   WOODEN   HANDLE
磁化/消磁器MAGNETIZER   AND   DEMAGNETIZER
方刃锥子SQUARE   BLADED   AWL
T型六角螺丝起子HEXAGON   SCREWDRIVER   WITH   T-HANDLE
T型内六角扳手HEXAGON   SOCKET   KEY   WITH   T-HANDLE
内六角扳手HEXAGON   SOCKET   KEY
加长内六角扳手EXTRA   LONG   HEXAGON   SOCKET   KEY
加长球头内六角扳手
内六角扳手套装HEXAGON   SOCKET   KEY   SET
T型星形螺丝起子SCREWDRIVER   WITH   T-HANDLE
曲柄螺丝起子CRANKED   SCREWDRIVER
量规GARGE
车灯测电笔CAR   LIGHT   TESTER
6-24伏测电笔VOLTAGE   TESTER   6-24V
150-250伏测电笔VOLTAGE   TESTER   150-250V
钳子3件套装PLIERS   SET，3-PIECE
万能手钳48件套UNIVERSAL   PLIERS   ASSORTMENT   WITH   48   PIECE
小钢丝钳SMALL   COMBINATION   PLIERS
钢丝钳（德式）COMBINATION   PLIERS（GERMAN   PATTERN）
钢丝钳（欧式）COMBINATION   PLIERS（EURO   PATTERN）
强力钢丝钳POWER   COMBINATION   PLIERS
塑料水口钳SIDE   CUTTERS   FOR   PLACTIC
剪钳（瑞典款式）SIDE   CUTTERS（SWEDISH   PATTERN）
电工剪钳ELECTRICIAN’S   SIDE   CUTTERS
剪钳（美国款式）POWER   SIDE   CUTTERS（AMERICAN   PATTERN）
杠杆剪钳LEVER-ACTION   SIDE   CUTTERS
杠杆顶剪钳LEVER-ACTION   END   CUTTING   NIPPERS
核头钳TOWER   PINCERS
拨钉钳PINCERS
平头钳FLAT   NOSE   PLIERS
圆头钳ROUND   NOSE   PLIERS
直头尖嘴钳LONG   NOSE   PLIERS
弯头尖嘴钳
电话钳TELEPHONE   PLIERS
强力尖嘴钳TRIPLE-FUNCTION   PLIERS
直口机修工钳MECHANICS   PLIERS   STRAIGHT   PATTERN
曲口机修工钳MECHANICS   PLIER   ANGLED   PATTERN
偏口机修工钳MECHANICS   PLIER   OFFSET   PATTERN
30度平圆机修钳MECHANICS   PLIER   WITH   30
电缆刀CABLE   KNIFE
电工电缆刀ELECTRICIAN’S   CABLE   KNIFE
防静电专用钳子
电子钳ELECTRONIC   PLIERS
迷你电子钳MINIATURE   ELECTRONIC   PLIERS
防静电尖嘴钳/防静电顶切钳/电子平头钳/电子剪钳/防静电剪钳/电子剥线钳
电缆剪钳CABLE   CUTTERS
小型万用剪SMALL   UNIVERSAL   SCISSORS
万用电缆刀UNIVERSAL   CABLE   KNIFE
自动剥线钳STRIPPING   PLIERS   ANTOMATIC
剥线钳STRIPPING   PLIERS
固定剥线钳STRIP-FIX   STRIPPING   PLIERS
剥线工具WIRE   STRIPPER
高效剥线钳HIGH-PERFORMANCE   WIRE   STRIPPER
数据传输电缆精确剥线钳PRECISION   WIRE   STRIPPER   FOR   DATA   CABLES
同轴电缆剥线钳WIRE   STRIPPER   FOR   COAXIAL   CABLES
绝缘剥漆钳INSULATING   VARNISH   STRIPPER
剥线刀WIRE   STRIPPING   KNIFE
绝缘胶带INSULATING   TAPE
压线钳CRIMPING   PLIERS
锁把式压线钳LOCK-GRIP   CRIMPING   PLIERS
端子压线钳WIRE   END-SLEEVE   PLIERS
模块压线夹钳MODULAR   LOCK-GRIP   CRIMPING   PLIERS
模块压线钳MODULAR   CRIMPING   PLIERS
精确压线钳PRECISION   CRIMPING   PLIERS
外卡簧钳（轴用）EXTERNAL   CIRCLIP   PLIERS（ON   SHAFTS）
直头/弯头外卡簧钳（轴用）
内卡簧钳（孔用）INTERNAL   CIRCLIP   PLIERS（IN   BORES）
直头/弯头内卡簧钳（孔用）
大型/重型卡簧钳
X型把X-GRIP
大力钳LOCK-GRIP   PLIERS
平行钳夹大力钳PARALLEL   JAW   LOCK-GRIP   PLIERS
宽口大力钳WIDE   JAW   LOCKING   PLIERS
滑行杆式大力钳LOCK-GRIP   SLIDE   CLAMP
固定大力钳GRIP   WRENCH   FOR   GLUEING
机械工作台钳MACHINE   WORKBENCH   CLAMP
焊接大力钳LOCK-GRIP   WELDING   CLAMP
管子焊接大力钳LOCK-GRIP   TUBE   WELDING   CLAMP
C型大力钳LOCK-GRIP   C   CLAMP
水泵钳UNIVERSAL   PLIERS（7种设置/5种设置）
水泵钳WATER   PUMP   PLIERS
特殊水泵钳SPECIAL   WATER   PUMP   PLIERS
可调式高速管子钳HIGH-SPEED   PIPE   WRENCH   WITH   SCREW   ADJUSTER
高速曲口管子钳HIGH-SPEED   PIPE   WRENCH   CURVED
迷你链式管子钳MINI   CHAIN   PIPE   WRENCH
链钳CHANIN   PIPE   WRENCH
重型管子钳STILLSON   PIPE   WRENCH
断线钳BOLT   CUTTERS
钳子套装（3件/4件/6件/8件）
VDE绝缘安全电工工具VDE   INSULATED   SAFETY   TOOLS
VDE绝缘标准符合DIN   EN   60900   IEC   60900：2004以及VDE680   适合在高压区安全工作（AC1000V   DC1500V）
VDE绝缘螺丝起子VDE   SCREWDRIVER（一字/十字/米字/星型/内六角）
VDE绝缘起子套装
电压传感器/电压测试器VOLTAGE   DETECTOR/TESTER
绝缘扭力扳手VDE   TORQUE   WRENCH
绝缘双向棘轮扳手VDE   REVERSIBLE   RATCHET
绝缘六角套筒VDE   SOCKET   HEXAGONAL
绝缘旋具头套筒VDE   SCREWDRIVER   BIT   SLCKET
T型绝缘扳手VDE   T-HANDLE
绝缘延长杆VDE   EXTENSION
绝缘电工工具组套（3件/8件/14件/108件）
VED   3C绝缘手柄套筒扳手VDE   SOCKET   WRENCH   WITH   3C   HANDLE
绝缘梅花扳手VDE   SINGLE-ENDED   RING   SPANNER   WITH   DEEP   OFFSET
绝缘开口扳手VDE   SINGLE-ENDED   OPEN   SPANNER
VDE绝缘钢锯HACKSAW
绝缘电缆刀VDE   CABLE   KNIFE
绝缘电缆剪CABLE   SHEARS
棘轮式绝缘电缆剪钳CABLE   CUTTERS
VDE绝缘电缆剪VDE   CABLE   SHEARS
绝缘剥线钳/绝缘固定剥线钳/绝缘水泵钳/绝缘强力钢丝钳/绝缘斜口钳/绝缘电工斜口钳/绝缘平口钳/绝缘圆头钳/绝缘直头尖嘴钳/绝缘弯头尖嘴钳
VDE绝缘橡胶垫VDE   RUBBER   COVER   SHEET
VDE绝缘电工安全手套VDE   ELECTRICIANS’S   SAFETY   GLOVES
绝缘塑料夹VDE   PLASTIC   CLAMPS
车轮扳手WHEEL   WRENCHES
十字扳手4   WAY   WHEEL   WRENCH
撬棒TYRE   LEVER
轮毂罩移除工具HUBCAP   RENOVING   TOOS
配重钳BALANCE-WEINHT   PLIERS
制动弹簧钳BRAKE-SPRING   PLIERS
闸线弹簧钳PLIERS   FOR   BRAKE-CABLE   SPRINGS
制动钳刷BRAKE-CALIPER   BRUSH
放油塞扳手（四方）DRAIN-PLUG   WRENCH   WITH   SQUARE
油壶OIL   CANS
过滤器扳手UNIVERSAL   FILTER   WRENCH
皮带钳PULLEY   WRENCH
阀门研磨机VALVE   GRUNDER
阀门研磨工具VALVE   LAPPING   TOOS
油封钳VALVE-SEAL   PLIERS   GUNMETAL   FINISH
汽缸/活塞环压缩器VALVE   SPRING   COMPRESSOR   BRIGHT   NICKEL-PLATDE
活塞环钳PISTON   RING   PLIERS
软管夹钳HOSE   CLIP   PLIERS
电极拉马BATTERY   TERMINAL   PULLER
电池测试器BATTERY   TESTER
火花塞套筒SPARK   PLUG   SOCKET
火花塞套筒扳手SPARK   PLUG   SOCKET   WRENCH
火花塞刷SPARK-PLUG   BRUSH
特殊尖冲凿SPECIAL   PIN   PUNCH
弹簧撑开器SPRING   SPREADER
球头拉拔器UNIVERSAL   BALL   JOINT   REMOVER
通用罐UMIVERSAL   CANISTER
防冻测试器ANTI-FREEZE   TESTER
安装钳INSTALLATION   PLIERS
吸盘SUCTION   LIFTER
磁性拾取工具MAGNETIC   PICK-UP   TOOL
金属片切割器NIBBER
杠杆剪切机LEVER-ACTION   TIN   SNIPS
打孔钳PUNCH   PLIERS
橡胶锤RUBBER   HAMMER
塑料锤PLASTIC   HAMMER
无后坐力锤RECOILLESS   HAMMER
钳工球头锤ENGINEERS’S   BALL   PEIN   HAMMER
钳工锤ENGINEERS’S   HAMMER
平面刮刀FLAT   SCRAPER
三角空心刮刀THREE-EDGED   HOLLOW-GROUND   SCRAPER
三角实心刮刀THREE-EDGED   FLAT-GROUND   SCRAPER
密封刮刀GASKET   SCRAPER
平锉HAND   FILE
圆锉ROUND   FILE
三角锉TRIANGULAR   FILE
半圆锉HALF-ROUND   FILE
锉类6件套装
中心冲/凿/开口销冲CENTRE   PUNCHES/CHISELS/DRIFT   PUNCHES
钢锯HACKSAW
栓孔锯KEYHOLE   SAW
小金属锯SMALL   METAL   SAW
小PUK钢锯PUK   JUNIOR   HACKSAW
HOBBY锯
台钳/台虎钳METALWORKING   VICE（100/125/150mm）
钢卷尺STEEL   TAPE   MEASURE（3米/5米/8米）
阀塞尺VALVE   FEELER   GAUGE
塞尺
火花塞塞尺SPARK   PLUG   GAUGE
螺纹规THREAD   GAUGE
游标卡尺POCKET   VERNIER   CALLIPER
数显游标卡尺DIGITAL   CALLIPER
划线器SCRIBER
镊子TWEEZERS
十字镊子CROSSLOCK   TWEEZERS
螺钉取出器BOLT   EXTRACTOR
断螺钉取出器套装SCREW   EXTRACTOR   SET
机械螺母破开器MECHANICAL   NUT   SPLITTER
螺栓插入及取出器STUD   INSERTER   AND   EXTRACTOR
丝锥THREAD   FILE
管子割刀PIPE   CUTTER
自动切割机AUTOMATIC   PIPE   CUTTER
链式切管机CHAIN   PIPE   CUTTER
虹吸扳手SIPHON   TRAP   PLIERS
钢丝刷WIRE   BRUSH
锉刀清洁刷FILE   CLEANING   BRUSH  
裁缝剪TAILORS   SCISSORS
发光二极管井下检查灯LED   INSPECTION   LAMP
井下检查灯INSPECTION   LAMP
发光二极管工作灯LED   WORK   LIGHT
工程锤ENGINEERS   HAMMER   ROTBAND-PLUS
工程圆头锤ENGINEERS’BALL   PEIN   HAMMER
胡桃木备用手柄SPARE   HANDLE   HICKORY
工匠锤JOINERS’HAMMER   ROTBAND-PLUS
石匠锤CLUB   HAMMER
双面石匠锤DOUBLE   FACED   CLUB   HAMMER   ROTBAND-PLUS
大锤SLEDGE   HAMMER
大碎石锤STONE   SLEDGE   HAMMER
劈木锤WOOD   SPLITTING   HAMMER
铺路锤PAVING   HAMMER
单板锤VENEER   HAMMER
磁性锤MAGNETIC   HAMMER   ROTBAND
玻璃装配工锤GLAZIERS   HAMMER
炭化合金瓦锤CARBIDE   TILE   HAMMER
羊角锤CLAW   HAMMER
电焊敲锤SCALING   HAMMER   ROTBAND-PLUS
无弹力安全锤RECOILLESS   HAMMER
安全锤SAFETY   HAMMER   SOFT-PLUS
塑料锤PLASTIC   HAMMER
橡皮锤RUBBER   MALLET   HARD
尼龙锤NYLON   HAMMER
木锤WOOLEN   MALLET
铜锤COPPER   HAMMER   CLUB   SHAPE
铝锤ALUMINIUM   HAMMER   ROTBAND
桶形铝锤LEAD   HAMMER   SARREL   SHAPE
冷凿锤COLD   CHISEL   HAMMER
热凿锤HOT   CHISEL   HAMMER
平底压摸锤SET   HAMMER   TOP   PART
压槽铁锤TOP   FULLER
上型模锤BOTTOM   FULLER
冲锤PUNCH   HAMMER
镰刀锤SCYTHE   HAMMER
锻工钳BLACKSMITH’S   TONGS
铆钉钳RIVETTING   TONGS
锥型冲子/中心冲子/销式冲子DRIFT   PUNCHES/CENTRE   PUNCHES/PIN   PUNCHES
自动中心冲子AUTOMATIC   CENTRE   PUNCH   WITH   TIP
冲子组套DRIFT   PUNCH   SET
铆钉装配器RIVET   SETTER
字母及数字冲子LETTER   AND   NUMBER   PUNCHES
装配冲子SETTING   PUNCH
撬杆PRVBAR
起钉器NAIL   FIFER   OCTAGONAL
撬棍CROWBAR
通用拉马UNIVERSAL   PULLER
两爪拉马PULLER   2-ARM   PATTERN
三爪拉马PULLER   3-ARM   PATTERN
防腐蚀拉马COROSTOP   PULLER   PATTERN
快速拉马QUICK-ACTION   PULLER
两爪液压拉马UNIVERSAL   2-ARM   PULLER
拉马延长杆EXTENSION   FOR   PULLERS
液压轴杆HYDRAULIC   PRESSURE   SPINDLE
三爪液压拉马UNIVERSAL   2-ARM   PULLER
拉马套装PULLER   SET
螺母劈开器NUT   SPLITTER
液压螺母劈开器NUT   SPLITTER   HYDRAULIC
螺栓提取器STUD   EXTRACTOR
轴承提取器BALL   BEARING   EXTRACTOR
滚珠轴承提取器套装BALL   BEARING   EXTRACTOR   SET
内提取器INTERNAL   EXTRACTOR
冲击轴承拉马IMPACT   BEARING   PULLER
汽缸拉马CYLINDER   LINER   PULLER   COMPLETE   WITH   SUPPORT   BRACE
分离拉马SEPARATOR   PULLER
轴承分离器BEARING   SEPARATOR
传动轴轴承拉马DRIVE   SHAFT   BEARING   PULLER
分离器及拉马套装SEPARATOR   AND   PULLER   SET
拉拔卡盘PULLING   CHUCK
液压泵HYDRAULIC   PUMP
液压手泵HYDRAULIC   HAND   PUMP
液压工具拉马1.50   PULLER   FOR   HUDRAULIC   IMPLEMENT1.50
液压增力器HYDRAULIC   PRESS
轮毂拉马WHEEL-HUB   PULLER
传动轴拉马DRIVE-SHAFT   PULLER
方向盘拉马STEERING-WHEEL   PULLER
装配叉DISMANTLING   AND   ASSEMBLY   FORK
球头拉拔器BALL   JOINT   PULLER
三爪机滤扳手OIL   FILTER   HOOK
弹簧撑SPRING   SPREADER
塑料轴承安装套装PROFESSINAL   PLASTIC   BEARING   INSTALLATION   SET
法兰分离器FLANGE   SEPARATORS
轨距测量器TRACK   ALIGNMENT   GAUGE
扳手WRENCHES
管子切割器PIPE   CUTTERS
扩口工具FLARING   TOOLS
弯管机PIPE   BENDERS
管子工具PLUMBING   TOOLS
铁皮剪/断线钳TIN   SNIPS/BOLT   CUTTERS
管子清洁设备PIPE   CLEANING   EQUIPMENT
弯管系统PIPE   BENDING   SYSTEMS
SNAP管道扳手PIPE   WRENCH   ECK-SNAP
钢管切割器PIPE   CUTTER   TUBEX   FOR   STEEL   PIPES
生铁管切割器PIPE   CUTTER   TUBEX   FOR   CAST   IRON   PIPES
不锈钢管切割器RATCHET   PIPE   CUTTER   NIRO   FOR   STAINLESS   STEEL   PIPES
管子修边器PIPE   DEBURRING   REAMER
不锈钢管修边器PIPE   DEBURRING   REAMER   FOR   STAINLESS   STEEL   PIPES
扩口工具套装FLARING   TOOL   SET   BOERDEX
钢管扩口钳EXPANDER   PLIERS   FOR   COPPER   PIPES
带滑轨的弯管机PIPE   BENDER   WITH   SLIDE   RAIL
带滚轴的弯管机PIPE   BENDER   WITH   ROLLER
弯管钳PIPE   BENDING   PLIERS
带滑轨的弯管钳PIPE   BENDING   PLIERS   WITH   SLIDE   RAIL
带滚轴的弯管钳PIPE   BENDING   PLIERS   WITH   ROLLER
手动弯管机MANUAL   BENDING   TOOL
液压弯管机HYDRAULIC   PIPE   BENDER
手动液压弯管机PIPE   BENDING   MACHINE   FOR   MANUAL   HYDRAULIC   OPERATION
电动液压弯管机PIPE   BENDING   MACHINE   FOR   ELECTRO   HYDRAULIC   OPERATION
管道矫直工具PIPE   STRAIGHTENING   TOOL
金属片弯边钳SHEET   METAL   CRINPING   PLIERS
折边钳SEAMING   PLIERS
快速夹取扳手QUICK-CLAMP   WRENCH
夹管钳GRIPPING   PLIERS
分级扳手STEPPED   KEY
复合分级扳手COMBINATION   STEPPED   KEY
铁皮剪TIN   SNIPS   /HOLE   CUTTING   SNIPS   /PELICAN   PATTERN   SNIPS
断线钳BOLT   CUTTER
管道清洁软轴FLEXIBLE   PIPE   CLEANING   SHAFT
排水管清洁器DRAIN   PIPE   CLEANER
工作台几工作桌WORKBENCHES   AND   WORK   TABLES
工具车TOOL   TROLLEYS
工具柜TOOL   CABINETS
车间推车WORKSHOP   TROLLEYS
抽屉柜/箱DRAWER-CABINETS/BOXES
衣柜/工作服柜WARDROBES
矮橱LOWER   CUPBOARD   UNIT
图纸夹DRAWING   HOLDER
电源面板PWER   SUPPLY   PANEL
防酸放腐蚀工作台面板
六边形工作台HEXAGONAL   WORKBENCH
带抽屉工作台WORKBENCH   WITH   DRAWER   CABINET
塑料抽屉插件PLASTIC   DRAWER   INSERT
工作桌推车WORKSHOP   TABLE   TROLIEYS
工作台WORKBENCH
带背板工作台
坚固推车TROUGH   TROLLEY
平板车PLATFORM   TROLLEY
带手柄平板车PLATFORM   TROLLYE   WITH   HANDLE
维护推车SERVICE   TROLLEY
带工具箱车间推车WORKSHOP   TROLLEY   WITH   TOOL   CHEST
工具箱TOOL   CHEST
存放斗STORAGE   TRAY
卷纸架PAPER   ROLL   HOLDER
垃圾桶WASTE   BASKET
移动架写字板LECTERN   WORKTOP
存储盒STORAGE   BOXES
带门库架CUPBOARD   WITH   SHELVING   WITH   DOORS
开敞式壁板COMPLETE   PANEL   SYSTEM   WITH   SLOTTED   PANELS
存物柜LOCKER   WITH   HINGED   DOORS
滑门橱CUPBOARD   WITH   SLIDING   DOORS
电脑柜COMPUTER   CABINET
桌上设备DESK   INSTALLATION
移动电脑架PC   STAION   MOBILE
电脑车间组合PC   WORKPLACE   COMBINATION
更衣室条凳CHANGING   CUBICLE   SEAT   BENCH
安全橱SAFETY   CUPBOARD
衣橱CLOTHES   LOCKER
带凳子的衣橱CLOTHES   LOCKER   WITH   SEAT   BENCH
消防员衣橱FIREFIGHTER’S   CUPBOARD
工具橱TOOL   CABINET
移动式可回收物品垃圾收集箱RECYCLING   WASTE-COLLECTION   CONTAINER   MOBILE
固定可回收物品垃圾收集箱RECYCLING   WASTE-COLLECTION   CONTAINER   STATIONARY
分类垃圾收集站WASTE-COLLECTION   STATION   CONTAINER
立式烟灰缸STAND   ASHTRAY
OCHSENKOPF系列斧头
欧洲ILTIS型斧
制图用刮刀
专业伐木斧
快劈斧
抢险袖珍刀
CAROLUS特殊工具
KLANN汽车专用工具
弹簧压缩器
横杆球头拉拔器
轮轴拉马
液压手用压力器
轴衬提取器
发动机锁定工具套装

扭距测试仪及设备TORQUE   TESTER   AND   EQUIPMENT
扭距倍增器TORQUE   MULTIPLIERS
扭距角度指示器TORQUE   ANGLE   INDICATORS
特殊DREMO工具SPECIAL   DREMO   TOOLS
DREMOMETER系列扭力工具DREMOMETER   TOOLS
扭距螺丝刀TORQUE   SCREWDRIVERS
扭距扳手/扭力扳手TORQUE   WRENCHES
电子扭距测试仪ELECTRONIC   TORQUE   TESTER
DKD校准遵守DKD准则3-7/3-8/DIN   EN   ISO   6789
RAHSOL   DREMOTEC产品校准按照DIN   EN   ISO   6789标准
迷你型扭距扳手DREMOMETER   MINI

DREMOMETER高强度铝合金扭距扳手   含：
DREMOMETER   1-12NM   /10-100LBF.IN   （塑料外表）
DREMOMETER   6-30NM   /50-270LBF.IN
DREMOMETER   8-40NM   /70-350LBF.IN
DREMOMETER   20-120NM   /15-90LBF.FT
DREMOMETER   40-200NM   /30-150LBF.FT
DREMOMETER   50-300NM   /35-220LBF.FT
DREMOMETER   80-360NM   /60-260LBF.FT
DREMOMETER   110-550NM   /80-405LBF.FT
DREMOMETER   140-760NM   /105-560LBF.FT
DREMOMETER   520-1000NM   /380-730LBF.FT
DREMOMETER   750-2000NM
DREMOMETER   1500-3000NM

DREMOMETER系列棘轮头RATCHET   HEADS   DREMOMTER
扭距限制接合器TORQUE   LIMIT   UNIT
转角仪TORQUE   ANGLE   INDICATOR
圆形插头式扭距扳手（覆盖范围8-1000NM）
开口扳子头OPEN   END   RTTING
梅花扳子头RING   END   RTTING
半开口梅花扳子头FLARED   END   FITTING
棘轮头RATCHET   HEAD
四方头FIXED   SQUARE   HEAD
方形插头式扭距扳手（覆盖范围8-400NM）
开口插头RECTANGULAR   OPEN   END   RTTING
梅花插头RECTANGULAR   RING   END   RTTING
半开口梅花插头RECTANGULAR   FLARED   END   RTTING
TORCOFIX系列带四方驱动的扭距扳手
TORCOFIX   K扭距扳手（四方头）TORQUE   WRENCH   TORCOFIX   K   含：
4549-01   1-5NM   1/4’方头
4549-02   2-25NM   1/4’方头
4549-05   5-50NM   3/8’方头
4550-10   10-100NM   1/2’方头
4550-20   20-200NM   1/2’方头
4550-30   60-300NM   1/2’方头
4550-40   75-400NM   1/2’方头
4550-55   100-550NM   3/4’方头
4550-75   140-750NM   3/4’方头
TORCOFIX   K扭距扳手套装TORCOFIX   K   TORQUE   WRENCH   SET
TORCOFIX   K快速旋转把手QUICK-TURN   WITH   T-GRIP   TORCOFIX   K
蘑菇头MUSHROOM   HEAD
TORCOFIX   Z扭距扳手（圆形插头）TORQUE   WRENCH   TORCOFIX   Z
TORCOFIX   SE扭距扳手（四方插头）TORQUE   WRENCH   TORCOFIX   SE
TORCOFIX   FS扭距扳手（可预设扭力值2-200NM）TORQUE   WRENCH   TORCOFIX   FS
TORCOFIX   UK扭距扳手TORCOFIX   UK   TORQUE   WRENCH
TORCOFIX   K扭距扳手TORCOFIX   K   TORQUE   WRENCH
扭距螺丝刀/扭力螺丝起子TORQUE   SCREWDRIVERS
FS型扭距螺丝刀   范围0.02-13.6NM
S型扭距螺丝刀   范围0.05-9NM
SP型扭距螺丝刀   范围10-500CNM
TSN预置扭距滑转扳手TSN   SLIPPER   QORQUE   WRENCH   范围3-125NM
TBN折弯式扭距扳手TBN   BREAKER   QORQUE   WRENCH   范围0.2-135NM
TSP预置扭距滑转扳手TSP   SLIPPER   QORQUE   WRENCH   范围1-10NM
TSC预置扭距滑转扳手TSC   SLIPPER   QORQUE   WRENCH   范围1-10NM
电线标示系统PLASTIC-TAG   MARKING   SYSTEM
刻度盘/表盘扭距扳手DIAL   MEASUREMENT   TORQUE   WRENCHES
适用场合：测试   控制   维护工作应用环境
ADS   4   0.8-4NM   1/4’方头
ADS   12D   2.4-12NM   1/4’方头
ADS   25   5-25NM   3/8’方头
ADS   40   8-40NM   3/8’方头
BDS   80E   16-80NM   1/2’方头
BDS   200   40-200NM   1/2’方头
CDS   400S   80-400NM   3/4’方头
DDS   800S   160-800NM   3/4’方头
EDS   1400S   280-1400NM   1’方头
EDS   2000S   400-2000NM   1’方头
88型折弯式扭距扳手TYPE   88   BREAKER   TORQUE   WRENCH   范围100-1500NM
8800-01   3/4’方头   100-500NM
8800-02   3/4’方头   150-700NM
8800-03   3/4’方头   300-1000NM
8800-04   3/4’方头   700-1500NM
8800-06   圆形插头16mm   130-550NM
扭距倍增器/扭力放大器/齿轮减速器TORQUE   MULTIPL