LED照明基本规格参数.pdf

TND328/D Rev.1 Sep07LED LightingDefinitions and CharacteristicsTND328/D Rev.1 Sep072DefinitionsTND328/D Rev.1 Sep073Luminous Flux lm Luminous flux is the quantity of the energy of the light emitted per second in all directions.The unit of luminous flux is lumen(lm).One lumen is the luminous flux of the uniform point light source that has luminous intensity of 1 candela and is contained in one unit of spatial angle(or 1 steradian).Steradian is the spatial angle that limits the surface area of the sphere equal to the square of the radius.This concept is shown in the figure for 1 m radius of the sphere.Since the area of sphere is 4r then the luminous flux of the point light source is 4 lumens.Point source with uniform light and 1 candela cd of luminous intensity.1 meter radius1 lumen ofLuminousfluxArea=1 square meterTND328/D Rev.1 Sep074Luminous Intensity cd The luminous intensity(measured in candelas)is the amount of light emitted into a certain direction,measured in 1 m distance.If the point light source emits lumens into a small spatial angle,the luminous intensity is I=/.The unit of luminous intensity is candela.There is a standard that details the candela definition.This includes the standard light source and the physical conditions of the measurement.TND328/D Rev.1 Sep075 Luminous intensity is not only driven by the luminous flux,but also by the optics,which makes the light more or less focused.TND328/D Rev.1 Sep076Illuminance This definition determines the amount of light that covers a surface.If is the luminous flux and S is the area of the given surface then the illuminance E is determined by E=/S.The unit of illumination in SI system is lux lx,and in foot-pound system it is foot-candle.One lx is the illuminance of 1 m surface area uniformly lighted by 1 lm of luminous flux.The following drawing explains this definition.One foot-candle is 10.76 lux.1 lm1 square meter1 lxTND328/D Rev.1 Sep077 Defines a color as the temperature K that a black body source must reach in order to produce that same color.Correlated Color TemperatureCIE(1931)xy chromaticity diagram including the Planckian locus,with temperatures indicated.Wavelengths of monochromatic light are shown in blue.The lines crossing the Planckian locus are lines of constant correlated color temperature.Noon sunlightMonochromatic ColorWave LengthSource http:/en.wikipedia.org/wiki/Chromaticity_diagramTND328/D Rev.1 Sep078Example:Chromaticity coordinate Groups for Osrams LWY87C Micro side LED for display backlighting applicationsTypical color temperature:6200 KTND328/D Rev.1 Sep079CharacteristicsTND328/D Rev.1 Sep0710Current/Voltage CharacteristicsForward voltage keeps decreasing.Small LEDs dedicated to backlighting now exhibit a forward voltage in the 3.1 to 3.2 V range.This has a strong impact on LED driver choice.LWY3SGdatasheetTND328/D Rev.1 Sep0711Chromaticity Coordinate ShiftOsram:LWY87CThe LEDs color characteristics are dependent from the forward current.Special attention must be paid when using LED drivers with Red-Green-Blue LEDs.Light dimming should not modify the color rendering.Preferred solution is PWM dimming to ensure that LEDs are driven with known forward current.TND328/D Rev.1 Sep0712Temperature InfluenceForward voltage:All LEDs exhibit forward voltage variation as junction temperature changes.The temperature coefficient depends from junction type.InGaAlP LEDs(Yellow and Amber Red)have a coefficient of between-3.0 mV/K to-5.2 mV/K,and the InGaN LEDs(Blue,Verde Green,and White)have a coefficient of between 3.6 mV/K and-5.2 mV/K.(Golden Dragon LWW5SG)Intensity change over temperature:Light intensity decreases as the temperature increases.This is a result of changing efficiencies in the semiconductor,and not a result of the change in the forward voltage over temperature changes.This temperature change is non-linear.TND328/D Rev.1 Sep0713Temperature InfluencePermissible current:LED manufacturers have realized significant improvements to allow high current operation.Nevertheless,high current LEDs used for camera phones exhibit shorter lifetime than small LEDs dedicated to backlight.This is not a strong issue in case of flash-light because of short pulse duration,but it must be taken into account for video mode.Datasheet:LWW5SG