资源描述
. . . .
TD <>
GSM 04.08 8.0.0(1999-07)
European Standard (Telecommunications series)
Digital cellular telecommunications system (Phase 2+);
Mobile radio interface layer 3 specification
(GSM 04.08 version 8.0.0 Release 1999)
Available SMG only
15 / 15
. . . .
Reference
REN/SMG-030408Q8 (8pc030o0.PDF)
Keywords
Digital cellular telecommunications system, Global System for Mobile communications (GSM)
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
secretariatetsi.fr
Individual copies of this ETSI deliverable
can be downloaded from
.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1999.
All rights reserved.
Contents
Intellectual Property Rights 5
Foreword 5
Introduction 5
1 Scope 6
2 Normative references 6
2.1 Definitions and abbreviations 10
2.2 Random values 10
2.3 Vocabulary 10
3 Radio Resource management procedures 10
4 Elementary procedures for Mobility Management 10
5 Elementary procedures for circuit-switched Call Control 10
6 Support for packet services 10
7 Examples of structured procedures 10
8 Handling of unknown, unforeseen, and erroneous protocol data 11
9 Message functional definitions and contents 11
9.1 Messages for Radio Resources management 11
9.2 Messages for mobility management 11
9.3 Messages for circuit-switched call control 11
9.4 GPRS Mobility Management Messages 11
9.5 GPRS Session Management Messages 11
10 General message format and information elements coding 11
10.1 Overview 11
10.2 Protocol Discriminator 11
10.3 Skip indicator and transaction identifier 11
10.4 Message Type 12
10.5 Other information elements 12
10.5.1 Common information elements. 12
10.5.2 Radio Resource management information elements. 12
10.5.3 Mobility management information elements. 13
10.5.4 Call control information elements. 13
10.5.5 GPRS mobility management information elements 13
10.5.6 Session management information elements 13
11 List of system parameters 13
Annex A (informative): Example of subaddress information element coding 14
Annex B (normative): Compatibility checking 14
Annex C (normative): Low layer information coding principles 14
Annex D (informative): Examples of bearer capability information element coding 14
Annex E (informative): Comparison between call control procedures specified in GSM 04.08 and CCITT Recommendation Q.931 14
Annex F (informative): GSM specific cause values for radio resource management 14
Annex G (informative): GSM specific cause values for mobility management 14
Annex H (informative): GSM specific cause values for call control 14
Annex I (informative): GSM specific cause values for session management 15
Annex J (informative): Algorithm to encode frequency list information elements 15
Annex K (informative): Default Codings of Information Elements 15
Annex L: Additional Requirements for backward compatibility with PCS 1900 for NA revision 0 ME. 15
Annex M (informative): Change Record 16
History 17
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Special Mobile Group (SMG).
This EN specifies the procedures used at the radio interface (Reference Point Um, see GSM 04.02) for Call Control (CC), Mobility Management (MM) and Radio Resource (RR) management within the digital cellular telecommunications system.
The contents of this EN are subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of this EN it will then be re-submitted for OAP with an identifying change of release date and an increase in version number as follows:
Version 8.x.y
where:
8 indicates GSM Release 1999 of Phase 2+
x the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
y the third digit is incremented when editorial only changes have been incorporated in the specification.
Introduction
The present document includes references to features which are not part of the Phase 2+ Release 96 of the GSM Technical specifications. All subclauses which were changed as a result of these features contain a marker (see table below) relevant to the particular feature.
The following table lists all features that were introduced after Release 96.
Feature
Designator
BA Range IE handling
$(impr-BA-range-handling)$
Advanced Speech Call Item
$(ASCI)$
Call Completion Busy Subscriber
$(CCBS)$
Mobile Assisted Frequency Allocation
$(MAFA)$
Network Indication of Alerting in MS
$(NIA)$
1 Scope
This EN specifies the procedures used at the radio interface (Reference Point Um, see GSM 04.02) for Call Control (CC), Mobility Management (MM), Radio Resource (RR) management and Session Management (SM). The detailed descriptions of the protocols and the related procedures are described in GSM 04.18, TS 23.108 and TS 24.008.
When the notations for "further study" or "FS" or "FFS" are present in this ETS they mean that the indicated text is not a normative portion of this standard.
These procedures are defined in terms of messages exchanged over the control channels of the radio interface. The control channels are described in GSM 04.03.
The structured functions and procedures of this protocol and the relationship with other layers and entities are described in general terms in GSM 04.07.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or nonspecific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies.
- A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
- For this Release 1999 document, references to GSM documents are for Release 1999 versions (version 8.x.y).
[1] GSM 01.02: "Digital cellular telecommunications system (Phase 2+); General description of a GSM Public Land Mobile Network (PLMN)".
[2] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms".
[3] TS 22.002: "Digital cellular telecommunications system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)".
[4] GSM 02.03: "Digital cellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)".
[5] GSM 02.09: "Digital cellular telecommunications system (Phase 2+); Security aspects".
[6] TS 22.011: "Digital cellular telecommunications system (Phase 2+); Service accessibility".
[7] GSM 02.17: "Digital cellular telecommunications system (Phase 2+); Subscriber identity modules Functional characteristics".
[8] GSM 02.40: "Digital cellular telecommunications system (Phase 2+); Procedures for call progress indications".
[9] GSM 03.01: "Digital cellular telecommunications system (Phase 2+); Network functions".
[10] TS 23.003: "Digital cellular telecommunications system (Phase 2+); Numbering, addressing and identification".
[11] GSM 03.13: "Digital cellular telecommunications system (Phase 2+); Discontinuous Reception (DRX) in the GSM system".
[12] TS 23.014: "Digital cellular telecommunications system (Phase 2+); Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system".
[12a] TS 23.071: “Digital cellular telecommunications system (Phase 2+); Location Services; Functional description – Stage 2”.
[13] GSM 03.20: "Digital cellular telecommunications system (Phase 2+); Security related network functions".
[14] TS 23.022: "Digital cellular telecommunications system (Phase 2+); Functions related to Mobile Station (MS) in idle mode".
[15] GSM 04.02: "Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration".
[16] GSM 04.03: "Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Channel structures and access capabilities".
[17] GSM 04.04: "Digital cellular telecommunications system (Phase 2+); layer 1 General requirements".
[18] GSM 04.05: "Digital cellular telecommunications system (Phase 2+); Data Link (DL) layer General aspects".
[19] GSM 04.06: "Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Data Link (DL) layer specification".
[20] TS 24.007: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3; General aspects".
[21] TS 24.010: "Digital cellular telecommunications system ; Mobile radio interface layer 3 Supplementary services specification; General aspects".
[22] GSM 04.11: "Digital cellular telecommunications system (Phase 2); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface".
[23] GSM 04.12: "Digital cellular telecommunications system (Phase 2+); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface".
[23a] TS 24.071: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 location services specification.
[24] TS 24.080: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 supplementary services specification Formats and coding".
[25] TS 24.081: "Digital cellular telecommunications system (Phase 2+); Line identification supplementary services - Stage 3".
[26] TS 24.082: "Digital cellular telecommunications system (Phase 2+); Call Forwarding (CF) supplementary services - Stage 3".
[27] TS 24.083: "Digital cellular telecommunications system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3".
[28] TS 24.084: "Digital cellular telecommunications system (Phase 2+); MultiParty (MPTY) supplementary services - Stage 3".
[29] TS 24.085: "Digital cellular telecommunications system (Phase 2+); Closed User Group (CUG) supplementary services - Stage 3".
[30] TS 24.086: "Digital cellular telecommunications system (Phase 2+); Advice of Charge (AoC) supplementary services - Stage 3".
[31] GSM 04.88: "Digital cellular telecommunications system (Phase 2+); Call Barring (CB) supplementary services - Stage 3".
[32] GSM 05.02: "Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path".
[33] GSM 05.05: "Digital cellular telecommunications system (Phase 2+); Radio transmission and reception".
[34] GSM 05.08: "Digital cellular telecommunications system (Phase 2+); Radio subsystem link control".
[35] GSM 05.10: "Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronization".
[36] TS 27.001: "Digital cellular telecommunications system (Phase 2+); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".
[37] TS 29.002: "Digital cellular telecommunications system (Phase 2+); Mobile Application Part (MAP) specification".
[38] TS 29.007: "Digital cellular telecommunications system (Phase 2+); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)".
[39] GSM 11.10: "Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformity specification".
[40] GSM 11.21: "Digital cellular telecommunications system (Phase 2); The GSM Base Station System (BSS) equipment specification".
[41] ISO/IEC 646 (1991): "Information technology - ISO 7-bit coded character set for information interchange".
[42] ISO/IEC 6429: "Information technology - Control functions for coded character sets".
[43] ISO 8348 (1987): "Information processing systems - Data communications - Network service definition".
[44] CCITT Recommendation E.163: "Numbering plan for the international telephone service".
[45] CCITT Recommendation E.164: "Numbering plan for the ISDN era".
[46] CCITT Recommendation E.212: "Identification plan for land mobile stations".
[47] ITU-T Recommendation F.69 (1993): "Plan for telex destination codes".
[48] CCITT Recommendation I.330: "ISDN numbering and addressing principles".
[49] CCITT Recommendation I.440 (1989): "ISDN user-network interface data link layer - General aspects".
[50] CCITT Recommendation I.450 (1989): "ISDN user-network interface layer 3 General aspects".
[51] ITU-T Recommendation I.500 (1993): "General structure of the ISDN interworking recommendations".
[52] CCITT Recommendation T.50: "International Alphabet No. 5".
[53] CCITT Recommendation Q.931: ISDN user-network interface layer 3 specification for basic control".
[54] CCITT Recommendation V.21: "300 bits per second duplex modem standardized for use in the general switched telephone network".
[55] CCITT Recommendation V.22: "1200 bits per second duplex modem standardized for use in the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits".
[56] CCITT Recommendation V.22bis: "2400 bits per second duplex modem using the frequency division technique standardized for use on the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits".
[57] CCITT Recommendation V.23: "600/1200-baud modem standardized for use in the general switched telephone network".
[58] CCITT Recommendation V.26ter: "2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2-wire leased telephone-
展开阅读全文