PB840呼吸机自检流程.docx

PB840自检流程Exit sst (退出自检)按accpet确认Unblock wye 放开Y型口，按ACCPET确认无水按clear键有水按ACCPET确认Is water in humidifile(湿化器内有水吗？ block wye堵管，按ACCPET确认Unblock wye 放开Y型口，按ACCPET确认Connect to from-patient port接上病人端Discoment at from patient port (将病人端脱开) 再按 确认ACCPETConnect humidifier if applicable(接上湿化器) 再按 确认ACCPET注意继续堵管开机，注意不得接模肺按SST键，颜色变红后，再按机器左外侧的TEST键，确认ACCPETConnect circuit with insp filter and without humidifier (将管道连接与湿化器脱开) 再按 确认ACCPETBlock wye(堵住三通管开口，保证密封。再按 确认ACCPET内容总结1PB840自检流程Exit sst (退出自检)按accpet确认Unblock wye 放开Y型口，按ACCPET确认无水按clear键有水按ACCPET确认Is water in humidifile(湿化器内有水吗2再按 确认ACCPET