外贸用中英对照标准销售合同.doc

BUYER NAME （买方名称）BUYER 买方 and 与 SELLER NAME （卖方名称)SELLER 卖方签订TABLE OF CONTENTS 目录PRELIMINARY STATEMENT 1 1. DEFINITIONS AND INTERPRETATION 1 1. 定义和解释 12. SCOPE OF CONTRACT 1 2. 合同范围 13. CONTRACT PRICE 2 3。 合同总价 14. PAYMENT 2 4。 支付 25. DELIVERY 4 5。 交货 36。 PACKING AND SHIPPING MARKS 5 6。 包装和唛头 47。 INSPECTION AND CLAIM 6 7. 检验和索赔 58。 INSTALLATION, COMMISSIONING AND ACCEPTANCE OF THE EQUIPMENT 7 8. 设备安装、调试和验收 69。 WARRANTY 9 9。 保证 710. SOFTWARE LICENSE 10 10。 软件许可 811. INTELLECTUAL PROPERTY INDEMNITY 12 11。 知识产权赔偿 912。 TAXES 13 12。 税收 1013。 REPRESENTATIONS AND WARRANTIES 13 13。 陈述及保证 1014。 TERM 14 14. 合同期限 1115。 TERMINATION 14 15. 合同终止 1116。 CONFIDENTIALITY 15 16。 保密义务 1217。 BREACH OF CONTRACT 16 17. 违约 1218。 FORCE MAJEURE 16 18。 不可抗力 1319。 SETTLEMENT OF DISPUTES 17 19。 争议的解决 1320。 MISCELLANEOUS PROVISIONS 20 20. 其他规定 16SCHEDULE A DEFINITIONS AND INTERPRETATION 25 附录一 定义和解释 19SCHEDULE B SPECIAL TERMS 29 附录二 - 特别条款 22ANNEX 1 - EQUIPMENT， SERVICES & DOCUMENTATION LIST AND PRICES 31 附件一 合同设备、合同服务及相关文件清单与价格 24ANNEX 2 - SPECIFICATIONS 32 附件二 合同技术规范 25ANNEX 3 - PROJECT SCHEDULE 33 附件三 项目进度表 26ANNEX 4 ENGINEERING NOTES AND INSTALLATION RESPONSIBILITIES 34 附件四 工程说明及安装责任范围 27ANNEX 5 EQUIPMENT ACCEPTANCE TEST PLAN 35 附件五 设备验收测试方案 28ANNEX 6 - SPECIMEN OF ACCEPTANCE CERTIFICATE 36 附件六 验收合格证书样本 29CAVEATS AND DRAFTING NOTES 37 注意事项与说明 30THIS CONTRACT (Contract） is made in the Contract Location and， China on the Contract Date set out in Schedule B （Special Terms) by and between the Buyer and Seller specified in Schedule B （Special Terms). Buyer and Seller shall hereinafter be referred to individually as a ”Party” and collectively as the ”Parties. 本合同（“本合同)于附录二（特别条款)中所列的合同生效日由附录二（特别条款）中所列的买方和卖方在中国缔约地点签订。买方和卖方以下单独称为“一方”，合称为“双方。PRELIMINARY STATEMENT 前言After friendly consultations conducted in accordance with the principles of equality and mutual benefit， the Parties have agreed to enter into a sales contract in accordance with Applicable Laws and the provisions of this Contract。 双方本着平等互利的原则,经友好协商,依照有关法律，同意按照本合同的条款，订立销售合同。Now the Parties Hereby Agree as Follows： 双方现协议如下:1。 DEFINITIONS AND INTERPRETATION 1。 定义和解释Unless the terms or context of this Contract otherwise provide， this Contract shall be interpreted in accordance with Schedule A， and each of the terms used herein shall have the meaning ascribed to it in Schedule A (Definitions and Interpretation) or Schedule B (Special Terms) as the case may be. 除本合同条款或上下文另有所指，本合同应根据附录一进行解释，本合同中所有相关用语的定义见附录一（定义和解释)和附录二（特别条款），以适用者为准。2。 SCOPE OF CONTRACT 2。 合同范围2。1 Supply of Equipment and Services 2。1 供应合同设备及提供合同服务Seller shall supply to Buyer the Equipment and Services (as more specifically set out in Annex 1 hereto） for the Project in accordance with the terms of this Contract。 Buyer shall pay Seller the Contract Price set out in Schedule B (Special Terms） hereto and shall perform its other responsibilities in accordance with the terms of this Contract。 卖方须按照本合同的条款,就合同项目向买方供应合同设备和提供合同服务（详见本合同附件一）.买方须按照本合同的条款，向卖方支付附录二(特别条款）所列的合同总价，同时履行本合同中规定的其它义务。2.2 Project Supervisors 2。2 项目负责人Seller and Buyer shall each nominate a representative as its project supervisor for the Project （each， a “Project Supervisor and jointly, the “Project Supervisors”)。 Each Project Supervisor shall be authorized to deal with all technical matters in connection with the Equipment and the Services during the period from the Effective Date up to the expiration of the applicable Warranty Periods. Detailed arrangements for both regularly scheduled and emergency communications between the Project Supervisors shall be made through friendly consultation by Seller and Buyer。 The Project Supervisors shall fully cooperate to resolve all technical issues which may arise in respect of the Equipment and the Services. If there is any dispute between the Project Supervisors, they shall analyze the problem， clarify the responsibilities and, to the fullest extent possible， settle it at the Installation Sites through friendly consultation。 During the period of Installation and Commissioning， the progress of work, the main work done every week， all problems arising and the suggested solution（s) shall be reported weekly by the Project Supervisors to Seller and Buyer。 卖方及买方应分别指派一位代表作为合同项目的项目负责人（“项目负责人),并授权各自的项目负责人于合同生效日期到相关保修期届满这一段时期内，处理合同设备及合同服务相关部份的所有技术事宜。卖方及买方应通过友好协商就项目负责人之间的定期联络以及在紧急情况下的联络作出具体安排.项目负责人应通力合作以解决合同设备和合同服务可能发生的所有技术问题.如果彼此之间发生争议，项目负责人应分析有关问题,分清责任,通过友好协商，尽最大可能在安装现场解决有关问题。在安装及调试期间，项目负责人每周应向卖方及买方报告工作进度、每周所完成的主要工作、所有出现的问题及建议的解决方案。2。3 No Transfer of Equipment 2.3 禁止转让合同设备Buyer acknowledges and agrees that the Equipment constitutes and embodies the Confidential Information and Intellectual Property of Seller. Without the prior written consent of Seller， Buyer may not directly or indirectly transfer the Equipment to any third party for consideration or without consideration。 买方确认并同意合同设备构成并载有卖方的保密资料及知识产权。未经卖方书面同意，买方不得直接或间接地、有偿或无偿地、将合同设备转让给第三方。3。 CONTRACT PRICE 3. 合同总价3.1 Price 3。1 合同总价The Contract Price is set out in Schedule B (Special Terms). 合同总价详见附录二（特别条款）。3.2 Consideration for Price 3。2 合同总价包括的事项This Contract Price covers： 合同总价包含:（a） the Equipment （including Hardware and Software License） and Services， （a） 合同设备(包括设备硬件和软件使用权)和合同服务，（b） if Seller is the Party Responsible for Shipment, the cost of shipment of the Hardware and Documentation to the Place of Delivery。 (b) 如果卖方是负责运输方,运送设备硬件和相关文件到交货地点的费用。3。3 Costs and Expenses 3。3 费用和开销The Contract Price does not cover costs and expenses that are for Buyers account under this Contract， or any taxes (including but not limited to customs duty and value added tax） payable by Buyer in respect of this Contract。 合同总价不含根据本合同应由买方承担的费用和开销，或买方就本合同应支付的税款(包括但不限于关税及增值税）。4。 PAYMENT 4. 支付Buyer shall pay Seller the Contract Price on the following terms： 买方应按以下条款向卖方支付合同总价.4。1 Advance Payment 4.1 预付款The Advance Payment shall be paid by Buyer to Seller by wire transfer to Sellers Designated Bank Account within ten (10） days after Buyer has received the following documents provided by Seller: 合同设备预付款由买方在从卖方收到下述文件后十（10）日内,以电汇的方式将预付款汇至卖方指定的银行帐户：（a） Pro forma invoice covering one hundred percent （100） of the Contract Price in six copies； （a) 载明百分之百(100）合同总价金额的形式发票,一式六（6）份;(b) Commercial invoice covering the Advance Payment in six copies； and (b） 载明预付款金额的商业发票，一式六（6）份；（c) Sight draft covering the Advance Payment in two copies。 （c) 载明预付款金额的即期汇票，一式两（2)份。4.2 Delivery Payment 4。2 交货付款The Delivery Payment shall be paid by Buyer to Seller under an irrevocable letter of credit (“Letter of Credit). 买方应向卖方开具一份不可撤销的信用证(“信用证），金额为交货付款额.Buyer shall fifteen (15) days prior to the scheduled Delivery Date for first Shipment， open the Letter of Credit in favor of Seller for the Delivery Payment with a bank and in form and content acceptable to both parties. The Letter of Credit shall be available against Sellers draft（s) at sight drawn on the opening bank for the Relevant Percentage of the invoice price of each Shipment accompanied by the shipping documents as follows： 买方应于第一批合同设备装运日期前至少十五(15）天，开具一份信用证（信用证），收款人为卖方，金额为交货付款额,信用证的形式、内容、以及开证银行事先应经双方一致同意.每批合同设备交货后，卖方可凭以下单据通过即期汇票(一式两份）向开证行议付每一批合同设备发票金额的相关百分比：（a） One original and two copies of Airway Bill or other document of title to be marked “Freight Collect Prepaid”, indicating shipping mark and consigned to Buyer。 （a） 以买方为收货人的空运单其他运输单据，标明“运费到付已付,并注明唛头,一（1）份原件，两（2)份复印件;（b） Commercial Invoice covering the Relevant Percentage in three (3) originals and three （3） copies, indicating the Contract number, L/C number and shipping mark; （b) 金额为相关百分比的商业发票，注明合同号、信用证号及唛头；三（3)份原件，三（3)份复印件,（c) Packing list in three （3） originals and three （3） copies issued by Seller； (c） 卖方出具的装箱单，三(3）份原件,三（3)份复印件;(d） One （1） original and one （1） copy of a Certificate of Quality issued by Seller； （d） 卖方出具的质量合格证书，一（1)份原件，一（1)份复印件;（e) One （1） copy of fax/email to Buyer advising particulars of delivery immediately after delivery to the carrier at the Port of Delivery has been made; （e） 在装运港将货物交给承运人后以传真或电子邮件的方式通知买方有关该批货物装运细节的一份通知复印件;（f） One （1) original and one (1) copy of certificate of origin； (f) 该批货物原产地证书，一(1）份原件，一（1)份复印件;（g） Two （2） copies of export licenses issued by the relevant export authority or two (2) copies of the confirmation from Seller that no export license is required. (g） 有关部门颁发的出口许可证的复印件或卖方签发的表明该批货物无需出口许可证的声明，一式两（2)份.(h) If Seller is the Party Responsible for Shipment， one (1) copy of insurance certificate specifying the risk type as all risk covering one hundred and ten percent （110） of the invoice amount for such Shipment。 (h） 如果卖方为负责运输方，一（1)份该批货物的保险证明,载明险别为一切险，投保金额为该批货物发票金额的百分之一百一十（110%）。The Letter of Credit shall be valid until the twentyfirst （21st） day after the date of last scheduled Shipment. 信用证应在预定的最后一批货物的交货日后的二十一(21）日内保持有效.4。3 Payment on Acceptance 4。3 验收合格之后的付款The Acceptance Payment for the Equipment shall be paid by Buyer by T/T within fifteen （15) days after Buyer has received the following documents from Seller： 合同项目的验收合格之后的付款，由买方在收到卖方提交的下述文件之后十五（15）日内以电汇的方式支付：(a） Commercial invoice covering the Acceptance Payment in three （3） originals and three (3） copies; （a） 载明验收合格之后付款金额的商业发票,三（3)份原件和三（3）份复印件;（b） One （1) original and one (1） copy of the Acceptance Certificate in respect of the Project。 (b） 合同项目的验收合格证书，一（1）份原件和一(1)份复印件。4.4 Shipment by Seller 4。4 卖方运输Seller shall commence Shipment once Buyer has paid the Advance Payment and opened the Letter of Credit as prescribed in Articles 4。1 and 4.2。 买方按照第4。1 条及第4.2 条的规定支付预付款并开出信用证后，卖方应开始发运合同设备。4.5 Bank Charges 4。5 银行费用Each party shall be responsible for its own bank charges。 各方应负责各自的银行费用。4。6 Title to Hardware 4。6 硬件所有权Full title to all Hardware shall transfer from Seller to Buyer upon Buyers payment in full of the Contract Price。 设备硬件部分的全部所有权于卖方全额收到合同总价之时，转移给买方。4.7 Late Payments 4。7 付款延期If Buyer fails to make any payment within the time stipulated in this Article 4， then Buyer shall be liable to pay to Seller interest on such unpaid amounts from the due date through the date such delayed payment is made in full. The applicable rate of interest shall be the LIBOR rate for sixmonth U。S。 dollar loans plus 2。 如果买方未能在第4 条规定的时间内支付某一笔款项，应就欠款向卖方支付利息,利息从到期应付之日至所欠款项全额还清之日计算。适用的利率为六个月期LIBOR 美元贷款的利率加2%。5。 DELIVERY 5. 交货5。1 Delivery Schedule 5。1 交货进度表Seller shall deliver each Shipment to the applicable Place of Delivery on or before the applicable Delivery Date set forth in the Project Schedule. The number of Shipments shall not exceed the Maximum No。 of Shipments set forth in Schedule B （Special Terms）. If the Place of Delivery is different from the Installation Site， then Buyer shall be responsible for transportation and insurance of each shipment from the Place of Delivery to Installation Site。 卖方应在项目进度表中规定的有关交货日或之前交每一批货.分批交货的总批数不得超过附录二(特别条款)中规定的合同设备最多发货批数.如交货地点不是设备安装地,买方应承担将每批货物从交货地点运送至设备安装地的运输和保险费用。5。2 Notification before Shipment 5。2 装运前通知At least two （2） weeks before making each Shipment， Seller shall send Buyer written notice of all relevant shipping details, including description， quantity and approximate weight and size of the Equipment in each Shipment, and other information consistent with industry practice。 在装运每一批合同设备至少两 （2)周前,卖方应书面向买方通知该批合同设备装运的所有相关细节，包括设备说明、数量、大概重量及体积、以及其他按照行业惯例应该提交的资料.5.3 Equipment Delivery 5.3 合同设备交付All the Equipment shall be shipped in complete sets， except as otherwise agreed， i.e.， any special tools for installation， materials and easily worn-out parts shall be dispatched along with the relevant Equipment. 除非另有协议,所有的合同设备均应整套装运,即，所有专用安装工具、辅料及易耗备件应与相关的合同设备一起装运。5.4 Notification After Shipment 5.4 装运后通知Seller shall notify Buyer by fax or email of all shipping details within two (2） working days after each Shipment has been dispatched。 For each large item, if any， over two （2） metric tons， the gross weight， measurement (L x W x H), name and price of such item shall be separately indicated. 卖方应在每批合同设备装运后的两（2)个工作日内，以传真或电子邮件的方式通知买方有关该批设备装运的细节.对超过2 公吨重的大件货物(如果有的话）要分别载明每一件货物的毛重、尺寸（长宽高)、名称及价格。5.5 Customs Clearance Documents 5.5 货物清关文件Within a reasonable time after each Shipment has been dispatched， Seller shall mail the Customs Clearance Documents specified in Schedule B (Special Terms）。 卖方应在每批合同设备装运后的合理时间内，向买方寄出附录二(特别条款)中列出的货物清关文件.5。6 Insurance 5。6 保险The Party Responsible for Shipment shall be responsible for obtaining insurance during shipment for the Equipment and Documentation in accordance with industry practice at its sole cost. If damage to the Equipment occurs during shipment, Seller and Buyer shall work together to submit an insurance claim。 负责安排运输的一方应依照行业惯例，自费为在运输途中的合同设备及相关文件购买保险。如果在运输过程中合同设备受损,卖方和买方应相互协作提出保险索陪.5。7 Sellers Late Delivery 5.7 买方交货迟延If solely due to Sellers fault， Seller fails to complete delivery of all Shipments to the Place of Delivery on or before the Delivery Date for the final Shipment set forth in the Project Schedule， then Seller shall be liable to pay to Buyer liquidated damages in respect of such delivery delay at the Late Delivery Penalty Rate until such delayed Equipment is delivered in accordance with the terms of this Contract or the end of the Maximum Late Delivery Period, whichever occurs earlier。 The total liquidated damages for late delivery shall not exceed the Maximum Late Delivery Penalty. The payment of liquidated damages for late delivery of any Shipment shall not release Seller from its responsibility to complete delivery of such Shipment. 如果完全由于卖方的过错，卖方未能在项目进度表规定的最后一批设备的交货日当日或之前将所有合同设备交至交货地点，卖方有责任就交货延误的合同设备按交货延误违约金比率向买方支付交货延误违约金，直到卖方按照本合同的条款交付所延误的合同设备，或直到交货延误的最长期限届满（以两者中较短者为准)。交货延误违约金的总额不超过特别条款中规定的交货延误违约金最高限额.卖方因交货延误而支付交货延误违约金并不解除其交货义务。5。8 Buyers Termination Right 5.8 买方终止权If such delivery delay extends beyond the expiration of the Maximum Late Delivery Period， then Buyer shall have the right to terminate this Contract。 If Buyer terminates this Contract in part or in whole, it shall return at Sellers expense all cancelled Equipment received from Seller， and Seller shall thereafter refund to Buyer， within fifteen （15) days of the date of return of all such Equipment， all amounts paid by Buyer to Seller for the terminated Equipment. 如果交货延误时间超出了最多迟延交货天数,则买方有权终止本合同.如果买方部分或全部终止本合同，买方应将从卖方收到的合同终止部分所涉及的合同设备归还卖方,费用由卖方承担。随后卖方应在这些合同设备全部返还之日后的十五(15)日内，向买方退还其就合同终止部分所涉及的合同设备向卖方支付的全部货款。5。9 Buyers Claims 5。9 买方索赔All of Buyers claims in respect of late delivery of Equipment shall be handled solely and exclusively in accordance with the provisions of Articles 5。7 and 5。8 above. 所有买方就交货延误提出的索赔应完全按照上述第5。7 和5。8 条的规定处理，且排除其他救济措施。6。 PACKING AND SHIPPING MARKS 6. 包装和唛头6。1 Equipment Packing 6。1 合同设备包装All of the Equipment to be delivered by Seller shall be packed in a manner suitable to protect it against repeated handlings and numerous loadings and unloadings。 Protective measures consistent with the characteristics and requirements of the various items of Equipment shall be taken to prevent the Equipment from damage by moisture， rain， shock and corrosion. 卖方对所交付的一切合同设备都应以适当方式包装，使之不因多次操作和装卸而受损.应根据合同设备不同部件的特点和要求采取保护措施，以免因潮湿、雨水、震动和腐蚀而造成