资源描述
AIX 5L for POWER V5.2
安装作业细则
V 1.0
权责单位：专业服务部UNIX小组
公司
文献制/修订履历
制/修订
版次
制/修订
日期
制/修订
阐明
作
者
备
注
V0.9
94/04/20
工作底稿
V1.0
V1.0版本
目 录
1. 目 4
2. 合用范畴 4
3. 权责阐明 4
3.1. 作业执行 4
4. 作业环节 5
4.1. 设定SMS设定 5
4.2. CREATE CDROM FILE SYSTEM 15
4.3. TAIWAN BOUNDLE 52安装 19
4.4. 安装ML 28
4.5. 安装C++ 35
1. 目
提供AIX 5L操作系统及有关安装作业细则、作法及注意事项，操作环节。
2. 合用范畴
AIX 5L操作系统及有关档案。
3. 权责阐明
3.1. 作业执行
3.1.1. 专业服务部工程师
4. 作业环节
4.1. SMS设定
4.1.1. 将AIX 5.2 OS 光盘第一片放入光驱后,听哔一声后，按下1 选取1.SMS (System Management Service)再按下Enter键
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
1 = SMS Menu 5 = Default Boot List
6 = Stored Boot List 8 = Open Firmware Prompt
memory keyboard network scsi speaker
pSeries Firmware
Version RG041029_d79e00_regatta
SMS 1.3 (c) Copyright IBM Corp. ，All rights reserved.
4.1.2. 请选取7. Select Boot Options，再按下Enter键
Main Menu
1. Select Language
2. Change Password Options
3. View Error Log
4. Setup Remote IPL (Initial Program Load)
5. Change SCSI Settings
6. Select Console
7. Select Boot Options
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:7
4.1.3. 请选取2. Configure Boot Device，再按下Enter键
1. Select Install or Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:2
4.1.4. 请选取7. Restore Default Setting，再按下Enter键
Configure Boot Device Order
1. Select 1st Boot Device
2. Select 2nd Boot Device
3. Select 3rd Boot Device
4. Select 4th Boot Device
5. Select 5th Boot Device
6. Display Current Setting
7. Restore Default Setting
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:7
4.1.5. 请按下<ESC>键，再按下Enter键
Current Boot Sequence
1. IDE CD-ROM
2. SCSI Tape ( loc=U0.1-P1/Z1-A0,0 )
3. Ethernet ( loc=Integ:U0.1-P1/E1 )
4. None
5. None
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:
4.1.6. 请选取6. Display Current Setting，再按下Enter键
Configure Boot Device Order
1. Select 1st Boot Device
2. Select 2nd Boot Device
3. Select 3rd Boot Device
4. Select 4th Boot Device
5. Select 5th Boot Device
6. Display Current Setting
7. Restore Default Setting
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:6
4.1.7. 请选取1. IDE CD-ROM 安装，再按下Enter键
Current Boot Sequence
1. IDE CD-ROM
2. SCSI Tape ( loc=U0.1-P1/Z1-A0,0 )
3. Ethernet ( loc=Integ:U0.1-P1/E1 )
4. None
5. None
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
4.1.8. 请按X键，再按下Enter键执行
Configure Boot Device Order
1. Select 1st Boot Device
2. Select 2nd Boot Device
3. Select 3rd Boot Device
4. Select 4th Boot Device
5. Select 5th Boot Device
6. Display Current Setting
7. Restore Default Setting
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:X
4.1.9. 请输入1，再按下Enter键
Are you sure you want to exit System Management Services?
1. Yes
2. No
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
4.1.10.系统已完毕安装顺序设定
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM STARTING SOFTWARE IBM IBM IBM
IBM IBM IBM IBM IBM IBM PLEASE WAIT... IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
Elapsed time since release of system processors：5 mins 23 secs
-------------------------------------------------------------------------------
Welcome to AIX.
boot image timestamp：01:55 07/10
The current time and date：09:46:51 03/23/
number of processors：2 size of memory：8192Mb
boot device：/pci@/ide@3,1/disk@0:\ppc\chrp\bootfile.exe
closing stdin and stdout...
4.1.11. 请选取F1键后，再按下Enter键
Starting NODE#000 physical CPU#001 as logical CPU#001... done.
lanai_open_log_file：log file is /tmp/lai0.MESSAGES
Preserving 19558 bytes of symbol table [lft_loadpin32]
******* Please define the System Console. *******
Type a F1 and press Enter to use this terminal as the
system console.
Pour definir ce terminal comme console systeme，appuyez
sur F1 puis sur Entree.
Taste F1 und anschliessend die Eingabetaste druecken，um
diese Datenstation als Systemkonsole zu verwenden.
Premere il tasto F1 ed Invio per usare questo terminal
come console.
Escriba F1 y pulse Intro para utilizar esta terminal como
consola del sistema.
Escriviu 1 F1 i premeu Intro per utilitzar aquest
terminal com a consola del sistema.
Digite um F1 e pressione Enter para utilizar este terminal
como console do sistema.
4.1.12. 请选取 1 后，再按下Enter键
1 Type 1 and press Enter to have English during install.
2 Entreu 2 i premeu Intro per veure la instal损aci?en catal?
3 Entrez 3 pour effectuer l'installation en fran蓷is.
4 F Installation in deutscher Sprache 4 eingeben
und die Eingabetaste drken.
5 Immettere 5 e premere Invio per l'installazione in Italiano.
6 Digite 6 e pressione Enter para usar Portugu瘰 na instala誽o.
7 Escriba 7 y pulse Intro para la instalaci鏮 en espa隳l.
88 Help ?
>>> Choice [1]：1
4.1.13. 请选取2后，再按下Enter键
Welcome to Base Operating System
Installation and Maintenance
Type the number of your choice and press Enter. Choice is indicated by >>>.
>>> 1 Start Install Now with Default Settings
2 Change/Show Installation Settings and Install
3 Start Maintenance Mode for System Recovery
88 Help ?
99 Previous Menu
>>> Choice [1]：2
4.1.14. 请选取1后，再按下Enter键
Installation and Settings
Either type 0 and press Enter to install with current settings，or type the
number of the setting you want to change and press Enter.
1 System Settings:
Method of Installation.............New and Complete Overwrite
Disk Where You Want to Install.....hdisk0
2 Primary Language Environment Settings (AFTER Install):
Cultural Convention................English (United States)
Language ..........................English (United States)
Keyboard ..........................English (United States)
Keyboard Type......................Default
3 More Options (Desktop，Security，Kernel，Software，...)
>>> 0 Install with the current settings listed above.
+-----------------------------------------------------
88 Help ? | WARNING：Base Operating System Installation will
99 Previous Menu | destroy or impair recovery of ALL data on the
| destination disk hdisk0.
>>> Choice [0]：1
4.1.15. 请选取1后，再按下Enter键(此处选取 hdisk0为OS所在disk)
4.1.15.1. 按下99 回到上页选项
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for installation and press
Enter. To cancel a choice，type the corresponding number and Press Enter.
At least one bootable disk must be selected. The current choice is indicated
by >>>.
Name Location Code Size(MB) VG Status Bootable
>>> 1 hdisk0 1S-08-00-8,0 70006 other vg Yes No
2 hdisk1 1S-08-00-5,0 70006 other vg Yes No
>>> 0 Continue with choices indicated above
66 Devices not known to Base Operating System Installation
77 Display More Disk Information
88 Help ?
99 Previous Menu
>>> Choice [0]：1
4.1.16. 请选取3后，再按下Enter键
Installation and Settings
Either type 0 and press Enter to install with current settings，or type the
number of the setting you want to change and press Enter.
1 System Settings:
Method of Installation.............New and Complete Overwrite
Disk Where You Want to Install.....hdisk0
2 Primary Language Environment Settings (AFTER Install):
Cultural Convention................English (United States)
Language ..........................English (United States)
Keyboard ..........................English (United States)
Keyboard Type......................Default
3 More Options (Desktop，Security，Kernel，Software，...)
>>> 0 Install with the current settings listed above.
+-----------------------------------------------------
88 Help ? | WARNING：Base Operating System Installation will
99 Previous Menu | destroy or impair recovery of ALL data on the
| destination disk hdisk0.
>>> Choice [0]：3
4.1.17. 请选取3后，再按下Enter键
Install Options
1. Enable Trusted Computing Base.................................... No
2. Enable CAPP and EAL4+ Technology................................. No
(English only，64-bit kernel enablement，JFS2 file systems)
3. Enable 64-bit Kernel............................................. No
4. Create JFS2 File Systems......................................... No
5. Graphics Software................................................ Yes
6. Documentation Services Software.................................. No
7. Enable System Backups to install any system...................... Yes
(Installs all devices and kernels)
>>> 8. Install More Software
0 Install with the current settings listed above.
88 Help ?
99 Previous Menu
>>> Choice [8]：3
4.1.18. 请选取4后，再按下Enter键
Install Options
1. Enable Trusted Computing Base.................................... No
2. Enable CAPP and EAL4+ Technology................................. No
(English only，64-bit kernel enablement，JFS2 file systems)
3. Enable 64-bit Kernel............................................. Yes
4. Create JFS2 File Systems......................................... No
5. Graphics Software................................................ Yes
6. Documentation Services Software.................................. No
7. Enable System Backups to install any system...................... Yes
(Installs all devices and kernels)
>>> 8. Install More Software
0 Install with the current settings listed above.
88 Help ?
99 Previous Menu
>>> Choice [8]：4
4.1.19. 请选取0后，再按下Enter键
Install Options
1. Enable Trusted Computing Base.................................... No
2. Enable CAPP and EAL4+ Technology................................. No
(English only，64-bit kernel enablement，JFS2 file systems)
3. Enable 64-bit Kernel............................................. Yes
4. Create JFS2 File Systems......................................... Yes
5. Graphics Software................................................ Yes
6. Documentation Services Software.................................. No
7. Enable System Backups to install any system...................... Yes
(Installs all devices and kernels)
>>> 8. Install More Software
0 Install with the current settings listed above.
88 Help ?
99 Previous Menu
>>> Choice [8]：0
4.1.20. 请选取1后，再按下Enter键
Overwrite Installation Summary
Disks： hdisk0
Cultural Convention： en_US
Language： en_US
Keyboard： en_US
64 Bit Kernel Enabled： Yes
JFS2 File Systems Created： Yes
Graphics Software： Yes
Documentation Services Software： No
Enable System Backups to install any system： Yes
Optional Software being installed：
>>> 1 Continue with Install
+-----------------------------------------------------
88 Help ? | WARNING：Base Operating System Installation will
99 Previous Menu | destroy or impair recovery of ALL data on the
| destination disk hdisk0.
>>> Choice [1]：1
4.1.21. 系统已开始安装 AIX 5L操作系统
Installing Base Operating System
Please wait...
Approximate Elapsed time
% tasks complete (in minutes)
16 1 Copying Cu* to disk
展开阅读全文
浙ICP备2021020529号-1 | 浙B2-20240490 
